离子液体介质中钌膦配合物催化的喹啉加氢反应

首次在亲水性离子液体[Rmim][p-CH3C6H4SO3](1-烷基-3-甲基咪唑对甲苯磺酸盐,R=甲基、乙基、正丁基、正己基和正辛基)中,以水溶性的[RuCl2(TPPTS)2]2(TPPTS:间磺酸钠基三苯基膦)为催化剂,分别考察了温度、压力、不同的离子液体、水和碘的加入等因素对喹啉加氢反应的影响.在100℃和氧气压力为3.0 MPa时,喹啉加氢生成1,2,3,4-四氧喹啉的选择性超过99%,转化率达到95.3%.利用环己烷萃取反应产物,即可实现催化剂与产物的分离,催化剂循环使用6次后反应的转化率仍可达86.0%.     

离子液体介质中钌纳米粒子催化苯乙酮及其衍生物的不对称加氢反应

采用水溶性三(间-磺酸钠苯基)膦(TPPTS)作稳定剂, 在离子液体1-丁基-3-甲基-咪唑四氟硼酸盐([BMIM]BF4)或1-丁基-3-甲基-咪唑对甲基苯磺酸盐([BMIM][p-CH3C6H4SO3])介质中用氢气还原RuCl3·3H2O, 得到钌纳米粒子. 将此钌纳米粒子与(1S, 2S)-1,2-二苯基乙二胺(简称(1S, 2S)-DPEN)、KOH在离子液体/异丙醇介质中原位生成一种不对称加氢催化剂, 用于催化苯乙酮及其衍生物的不对称加氢反应. 实验结果表明, 离子液体介质中的纳米钌催化剂体系具有良好的催化活性和对映选择性. 在优化反应条件下, 催化苯乙酮获得了100%的转化率和79.1%的对映选择性. 并且产物经正己烷萃取后, 含有钌纳米粒子的离子液体可以循环使用.     

离子液体介质中用Cu/ZrO2-SiO2催化香茅醛加氢合成薄荷醇

制备了Cu/ZrO2-SiO2双载体催化剂, 并在离子液体介质中研究了香茅醛催化加氢合成薄荷醇的反应. 研究结果表明, 离子液体中的阳离子与香茅醛分子中的羰基形成氢键, 使香茅醛更容易异构化为胡异薄荷醇, 提高了催化剂的选择性; 特别是可调节酸度的[bmim][AlmCln]离子液体, 有效地提供了香茅醛的异构化所需要的路易斯酸条件, 在竞争性加氢中促进了香茅醛向生成薄荷醇的方向转化. 在0.8 MPa, 90 ℃, 2 h的条件下, 香茅醛一锅反应生成薄荷醇的转化率为100%, 对薄荷醇的选择性为91.3%, 而且, 催化剂和离子液体可回收和重复使用.     

离子液体中锰卟啉催化双氧水氧化烯烃的研究

研究了离子液体中Mn(TFPP)Cl(meso-tatrakis(pentafluoropheyl)porphinato)manganese(Ⅲ)cloride锰卟啉催化烯烃的氧化反应.在离子液体-CH2C12混合溶剂中,以价廉、环境友好的H2O2为氧源,考察了离子液体结构、反应条件等对环氧化反应的影响.当氧化剂/环己烯/催化剂/咪唑=450∶150∶1∶75(摩尔比)时,室温下,在MMISM-CH2Cl2的混合溶剂中,环己烯的转化率和环氧环己烷的选择性可分别达到94.8%和95.5%,远高于在纯CH2Cl2中的实验结果.并在最优反应条件下考察了该催化剂体系对烯烃底物的适用性.此外,反应结束后,产物可以由正己烷萃取出来,考察了混合溶剂中Mn(TFPP)Cl催化剂的重复使用情况.     

温控相分离纳米Rh催化1,5-环辛二烯选择性加氢反应

发现离子液体[CH3(OCH2CH2)nN+Et3][CH3SO3-](ILPEG,n=12,16,22)具有临界溶解温度特性,据此确证了以ILPEG为稳定剂制得的Rh纳米催化剂具有温控相分离催化功能,并将其用于1,5-环辛二烯(1,5-COD)选择性加氢制环辛烯(COE)的反应中.在优化的反应条件下,1,5-COD转化率和COE选择性分别为99%和90%;Rh纳米催化剂经简单分相即可与产物分离,催化剂循环使用10次,其活性和选择性无明显降低.     

金属离子对Ru-Pt/γ-Al2O3催化剂上对氯硝基苯选择加氢反应的影响

 采用混合醇还原法制备了聚乙烯吡咯烷酮(PVP)稳定的Ru-Pt/γ-Al2O3双金属催化剂,考察了其催化对氯硝基苯(p-CNB)选择加氢反应的性能,探讨了反应温度、压力、第三金属离子的种类、添加量及添加方式对反应的影响. 结果表明,以Ru-Pt/γ-Al2O3为催化剂,在1.0 MPa和50 ℃的条件下反应1 h,p-CNB的转化率可达48.2%,生成对氯苯胺(p-CAN)的选择性为87.3%. 在反应体系中添加适量的Fe3+或Sn4+离子时,在相同的反应条件下,p-CNB的转化率和p-CAN的选择性分别提高到100%和99.0%. Fe3+或Sn4+的添加量及添加方式对p-CNB的转化率有较大的影响,加入Fe2+,Co2+和Ni2+离子也有利于提高催化剂的活性和选择性. Ru-Pt/γ-Al2O3催化剂体系对其它氯硝基苯的加氢反应也有明显的催化作用.     

双核离子液体的合成及其对酯化反应的催化活性

合成了双-(3-甲基-1-咪唑)亚丁基双对甲苯磺酸盐(Im-PTSA)、双-(3-甲基-1-咪唑)亚丁基双硫酸氢盐(Im-HSO4)、双-(1-吡啶)亚丁基双对甲苯磺酸盐(Py-PTSA)、双-(1-吡啶)亚丁基双硫酸氢盐(Py-HSO4)等4种功能化双核离子液体.分别采用红外光谱(FT-IR)、核磁共振氢谱(1H NMR)对合成的离子液体进行结构分析;采用热重(TG)测试了离子液体的热稳定性;此外,考察了离子液体的酸性和溶解性.以丁二酸和乙醇的酯化反应考察了4种离子液体的催化活性,结果表明:当n(C4H6O4)∶n(C2H5OH)=1∶3,催化剂Im-PTSA量占总质量的1.90%,反应温度70℃,反应时间2.5 h,酯收率可达93.6%,选择性达100%,且离子液体经真空干燥重复使用8次,催化活性没有明显降低.以奥氏体316 L不锈钢为试样,考察了双核功能化离子液体的腐蚀性,与浓硫酸进行对比,其对钢试样的腐蚀率不到浓硫酸的1/10.以双-(3-甲基-1-咪唑)亚丁基双对甲苯磺酸盐(Im-PTSA)为催化剂,考察了一元有机酸和二元有机酸与系列醇的酯化反应,均获得较高的酯收率和选择性,反应结束后产品与催化剂自动分层,简化了分离,有望成为一种具有发展潜力的酯化催化剂.     

碳纳米管促进的Co-Mo-K硫化物基催化剂用于合成气制低碳混合醇

 以自行制备的多壁碳纳米管(CNT)作为添加剂,制备共沉淀型CNT促进的Co-Mo-K硫化物基催化剂. 实验发现,与未添加CNT的催化剂相比,添加少量CNT可显著提高CO的加氢转化活性和生成低碳醇的选择性. 在5.0 MPa, 623 K, V(CO)∶V(H2)∶V(N2)=45∶45∶10, GHSV=3600 ml/(g·h)的反应条件下, Co1Mo1K0.3-10%CNT催化剂上CO的转化率达21.6%, 相应的总醇(C1～4醇)时空产率为241.5 mg/(g·h), 产物中C2+醇/C1醇=1.39 (C基选择性比). 添加少量CNT并不会导致Co1Mo1K0.3硫化物基催化剂上CO加氢反应表观活化能发生明显变化,但却导致工作态催化剂表面催化活性Mo物种(Mo4+)的摩尔百分率有所提高; 另一方面, CNT促进的催化剂对H2有更强的吸附活化能力,并能在相当大程度上抑制水煤气变换副反应的发生. 这些因素有利于提高催化剂的活性和选择性.     

离子液体中离子型共聚高分子保护的铂纳米粒子催化剂催化肉桂醛选择性加氢

用离子型共聚高分子poly(NVP-co-VBIM Cl-)保护离子液体[bmim]BF4中的铂纳米粒子.以肉桂醛选择性加氢制肉桂醇反应来评价铂纳米粒子的催化活性.结果表明,该体系下得到的铂纳米粒子粒径分布均一,并具有很高的稳定性.在离子液体中,此种高分子保护的铂纳米粒子对肉桂醛加氢制肉桂醇表现出良好的活性(转化率>90%)和选择性(>95%).催化剂可多次循环,其活性和选择性均能良好保持.     

新型离子液体介质中长链烯烃氢甲酰化反应

合成和表征了离子液体[Rmim][p-CH3C6H4SO3](R=CH3(CH2)n—, n=3, 7, 11, 15), 并以所合成的离子液体为反应介质, 考察了水溶性铑膦络合物HRh(CO)(TPPTS)3[TPPTS: P(m-C6H4SO3Na)3]对长链烯烃氢甲酰化反应的催化性能. 结果表明, 离子液体[Rmim][p-CH3C6H4SO3]中R基团链长的变化对催化活性具有重要的影响；而在相同离子液体中, 氢甲酰化反应活性随着烯烃链长的增加明显下降. 与文献报道中广泛使用的离子液体[Bmim]BF4、[Bmim]PF6相比, 该催化体系对长链烯烃氢甲酰化反应具有更好的活性和化学选择性, 在3.0 MPa, 100 ℃的条件下, 1-己烯氢甲酰化反应转化频率(TOF)高达2736 h-1. 反应完成后, 水溶性铑膦络合物能很好地溶解在离子液体中, 与有机物自动分层, 催化剂的循环使用易于实现.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.