侧链磺化型聚砜质子交换膜的设计与制备及其性能研究

在制备氯甲基化聚砜(CMPSF)的基础上,以对羟基苯磺酸钠(HBSS)和羟基苯二磺酸钠(HBDSS)为亲核试剂,通过亲核取代反应,在聚砜(PSF)主链上分别键联了以苯磺酸根(BSS)和苯二磺酸根(BDSS)基团为末端基的侧链,制得了亲水磺酸根基团与疏水主链"微相分离"结构的2种侧链型磺化聚砜PSF-BSS和PSF-BDSS,并优化了制备条件.在对磺化聚砜产物进行充分表征(FTIR和1H-NMR谱)的基础上,采用流延成膜法制备了质子交换膜,测定了质子交换膜的基本性能,重点考察了质子交换膜"芳香性"主链和亲疏水微区"相分离"这2种结构因素对交换膜性能的影响.实验结果表明,在极性较强的溶剂中,CMPSF与羟基苯磺酸钠可顺利地发生亲核取代反应,于100℃经40 h反应可制得磺酸根键合量分别为2.07 mmol/g和2.11 mmol/g的磺化聚砜PSF-BSS和PSF-BDSS.所制备的质子交换薄膜具有较高的质子传导率(PSF-BDSS交换膜室温为4.7×10-2S/cm,80℃为8.1×10-2S/cm),优良的尺寸稳定性(室温溶胀率为8.6%,80℃溶胀率为30%),且具有良好的热稳定性与抗氧化稳定性.     

基于一锅法的磺化聚砜质子交换膜的性能

以双酚A型聚砜(PSF)为基质材料,通过傅-克烷基化反应在PSF主链引入—NCO活性基团,制备乙基异氰酸化聚砜(PS-SA)。 在制备PS-SA的基础上,采用两步一锅法,PS-SA与2-萘酚-6,8-二磺酸钾通过亲核取代反应,制备一种侧链含有萘环的萘磺酸型磺化聚砜PS-NS,充分表征聚合物的化学结构,以溶液浇注的方法制备质子交换膜,研究了温度对PS-NS膜的吸水率(WU,Water Uptaking)、吸水溶胀性(Swelling Ratio)、质子传导率(Proton Conductivity)等基本性能的影响。 结果表明,PS-NS膜由于亲水基团距离较远,能够很容易形成相分离结构,所制备的质子交换膜高WU下尺寸稳定性仍然很高,其中PS-NS-4膜(磺酸基团键合量为1.42 mmol/g)在25和85 ℃的WU高达27.2%和40.3%,但是相应的吸水溶胀性仅为25.2%和57.2%,与相同条件下Nafion115膜的性能十分接近。     

侧链结构对侧链型磺化聚砜质子交换膜性能的影响

以双酚A型聚砜(PS)为基础,与自制的1,4-二氯甲氧基丁烷反应制备氯甲基化聚砜(CPS),接着与2-萘酚-6,8-二磺酸钾(NSK)进行亲核取代反应制备萘磺酸型侧链磺化聚砜(PS-NS)。采用溶液浇注法制备相应的质子交换膜(PEMs),结合前期研究的脂肪磺酸型侧链磺化聚砜(PS-ES)和苯磺酸型侧链磺化聚砜(PS-BS) PEMs,考察侧链结构对PEMs的吸水率、吸水溶胀率和尺寸稳定性的影响关系。结果表明,与主链型芳香聚合物PEMs相比,3种侧链型磺化聚砜PEMs由于亲水基团远离疏水主链,能够形成类似于Nafion膜的相分离结构,在高吸水率下保持更好的尺寸稳定性;在相同的离子交换膜容量(IEC)下,PS-ES、PS-BS和PS-NS膜随着侧链刚性苯环数目的增加,侧链的运动能力减弱,导致PEMs的尺寸稳定性增加,相应的质子传导率减小; PS-ES膜在25℃和85℃的质子传导率分别达到0. 072和0. 141 S/cm,PS-NS在25℃和85℃的尺寸溶胀性仅为21. 8%和51. 5%,性能与商业化的Nafion115膜十分接近。     

一类含多磺酸结构侧链型聚芳醚酮质子交换膜材料的合成及性能研究

为进一步改善芳香型磺化聚合物质子交换膜材料的离子传导率、尺寸稳定性和耐化学氧化稳定性,从聚合物结构设计出发,首先利用9,9-双(3-苯基-4-羟基)苯基芴与4,4′-(六氟异亚丙基)二苯酚、1,4-二(4-氟苯甲酰基)苯经芳香亲核缩聚合成了一系列含芴和苯侧基结构新型聚芳醚酮聚合物(4-PAEK-xx),进一步通过温和的后磺化反应,制备了一系列含多磺酸结构侧链型聚芳醚酮质子交换膜(4-SPAEK-xx).对所制备的侧链型聚芳醚酮质子交换膜的结构和性能分别进行了表征分析.结果表明,该类质子交换膜具有适中的吸水率和较低的溶胀率,80°C时的吸水率和溶胀率分别在21%~51.2%和7.4%~17.2%.该类聚芳醚酮质子交换膜展现出了良好的离子传导性,80°C时的离子传导率在115~171 mS/cm,其中4-PAEK-45膜(离子交换容量为2.12 mequiv/g)的离子传导率已经超过了商品化的Nafion膜.此外,所制备的侧链型聚芳醚酮质子交换膜还表现出了良好的热稳定性、力学性能和耐化学氧化性.磺化膜优良的综合性能主要归因于侧链多磺酸结构和长尺寸含氟疏水结构单元的同时引入,其中侧链多磺酸结构的引入降低了主链磺化结构单元的比例,同时使亲水性的磺酸基团与分子主链分隔开来;而长尺寸含氟疏水性结构单元的引入进一步提高了膜材料的尺寸稳定性和耐氧化稳定性.     

交联嵌段磺化聚芳醚砜质子交换膜的制备及性能

为提高磺化聚芳醚砜(SPAES)质子交换膜的质子传导率及稳定性, 制备了一系列交联嵌段SPAES质子交换膜(cbSPAES). 采用嵌段共聚方法, 在P₂O₅存在下, 利用磺酸基团与聚合物主链上活泼氢的脱水反应进行交联改性合成嵌段聚合物. 采用电化学阻抗谱技术测定了cbSPAES膜的质子传导率, 通过测试水中膜平面及厚度方向的尺寸变化率评价膜的尺寸稳定性, 通过加速老化试验评价膜的水解稳定性. 结果表明, 与未交联膜相比, cbSPAES膜的尺寸稳定性及水解稳定性明显提高; 在交联程度相同时, cbSPAES膜的吸水率和质子传导率随着磺化链段长度的增加呈上升的趋势. 如cbSPAES(30/10)-10膜在60 ℃水中的吸水率为65%, 平面方向和厚度方向的尺寸变化率分别为0.16和0.18, 质子传导率达到163 mS/cm.     

萘磺酸型侧链磺化聚砜质子交换膜的性能

以聚砜(PS)和自制的1,4-二氯甲氧基丁烷(BCD)为氯甲基化试剂通过Fridel-Crafts烷基反应制备氯甲基化聚砜(CPS),紧接着氯甲基与2-萘酚-6,8-二磺酸钾(NSK)试剂通过亲核取代反应制备一种萘磺酸型磺化聚砜(PS-NS),在用红外和核磁氢谱充分表征的基础上制备一系列磺酸基团键合量不同的PS-NS质子交换膜(分别为PS-NS-1,PS-NS-2,PS-NS-3)重点研究温度对质子交换膜性能的影响规律。研究结果表明:由于亲水基团与疏水主链距离较远,能够形成类似于Nafion膜的微相分离结构,使得该质子交换膜在高磺化度下仍能保持高的尺寸稳定性,同时随着温度升高,质子交换膜的吸水率、溶胀性以及质子传导率增加,PS-NS-3在25℃和85℃的吸水率为21. 3%和42. 7%,但是溶胀率仅为22. 2%和50. 3%,与商业化Nafion115膜(24. 9%和55. 0%)的性能十分接近,表现出很好的尺寸稳定性。     

侧链型磺化聚砜的制备及侧链链长对质子交换膜性能影响的研究

以氯乙酰氯和氯丁酰氯为亲电试剂,通过Friedel-Crafts酰基化反应,在聚砜(PSF)主链引入了含氯的且碳原子数目不同的(分别为2和4)柔性侧链,然后以对羟基苯磺酸钠(HBSS)为试剂,通过亲核取代反应制备了侧链型磺化聚砜2PSF-BSS和4PSF-BSS。采用佛尔哈德分析法、红外光谱(FT-IR)以及核磁氢谱(1HNMR)对侧链型磺化聚砜的化学结构和性能进行了表征,重点考察主要因素对Friedel-Crafts酰基化和亲核取代反应的影响,实验结果表明:以无水Al Cl3为催化剂,CH2Cl2为反应溶剂,反应温度50℃,CAPSF和CBPSF中氯含量分别达到2.03mmol/g和2.07mmol/g,第2步亲核取代反应遵循SN1机理,在强极性溶剂DMSO中磺酸基键合量分别为1.48mmol/g和1.46mmol/g。同时初步探索侧链链长对质子交换膜的质子传导率的影响,随着侧链长度的增长,侧链的柔性增强,亲水微区与疏水微区微相分离的程度增强,导致交换膜的质子传导率增大。     

侧链型磺化聚砜质子交换膜构-效关系的研究

在制备氯乙酰基化聚砜(CAPS)和氯丁酰基化聚砜(CBPS)的基础上,以对羟基苯磺酸钠(HBS)为试剂,通过亲核取代反应制备侧链长度不同的两种侧链型磺化聚砜2PS-BS和4PS-BS (侧链碳原子数目分别是2和4),利用FT-IR和1H-NMR表征它们的化学结构后,采用溶液浇注法制备它们的质子交换膜(PEM),同时结合我们前期制备的侧链型磺化聚砜1PS-BS质子交换膜,研究柔性侧链的长度对PEM性能的影响。研究结果显示,与主链型PEM相比,1PS-BS、2PS-BS和4PS-BS由于亲水基团远离疏水主链,能够形成类似于Nafion膜的相分离结构,相应的PEM在高吸水率下仍能保持优越的尺寸稳定性和耐氧化性能。在相同的温度和IEC下,3种PEM随着柔性侧链长度的增加,PEM的相分离程度增强,进而导致PEM的尺寸稳定性、耐氧化性能和质子传导率增强,其中4PS-BS-4膜在25℃时的吸水溶胀性仅为7.1%,优于相同条件下Nafion115和Nafion117膜(室温溶胀率分别为9.5%和11%),相应的质子传导率达到了0.049S/cm,满足燃料电池的实际应用要求。     

多磺化侧链型聚芳醚的合成及性能

本文通过对聚合物的结构设计,采用亲和取代的途径制备了含有甲氧基侧链的聚芳醚聚合物,然后去醚化得到了侧链含有羟基的聚芳醚材料,最后通过接枝的方法将磺酸基团引入聚合物成功的制备出多磺化侧链型聚芳醚质子交换膜材料。此类材料表现出好的热化学稳定性, 80 oC时的质子传导率可达到0.192 S/cm,超过了Nafion 117 薄膜的传导率.同时此类材料表现出低的尺寸稳定性。因此此类材料很有希望在质子交换膜领域得到应用     

具有高效长侧链的芘磺酸型磺化聚砜阳离子交换膜的性能

以双酚A型聚砜和无致癌毒性的溴甲基化试剂1,4-二溴丁烷为原料,通过烷基化反应在聚砜分子上引入可交换溴原子制备溴代聚砜(BPSF),将BPSF与8-羟基-1,3,6-芘三磺酸钠(TS)试剂通过亲核取代反应制备一种磺酸基团远离聚合物主链的芘磺酸型磺化聚砜(PS-TS)。采用溶液流延法制备PS-TS阳离子交换膜,通过控制亲核取代反应的时间制备了一系列磺酸基团含量不同的磺化聚砜膜PS-TS-n(PSF-TS-1(0.79 mmol/g)、PSF-TS-2(1.01 mmol/g)、PSF-TS-3(1.28 mmol/g))。结果表明,由于亲疏水区域距离较远,形成的相分离程度明显,PSF-TS膜在高吸水率下仍能保持很好的尺寸稳定性,随着磺酸基团含量增多,相分离程度增强,其中磺酸基团含量为1.32 mmol/g的PSF-TS-3膜在25和85℃的溶胀率仅为22.9%和51.3%,相应的质子传导率达到了0.088和0.149 S/cm,尺寸稳定性超过了商业化Nafion115膜在相同条件下的性能,有望用于燃料电池的实际应用。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

解决能源问题的新途径——光解水制氢的研究

面对日益枯竭的能源危机,氢能是一种洁净、最有前景的替代能源。目前在各种制氢的方法中光催化分解水制氢的研究最多,光解水过程中催化剂最关键,本文对利用太阳能光解水的途径、提高光催化反应效率以及光催化剂的开发研究进行了综述。     

黄酮化合物的合成研究进展

黄酮化合物是一类具有多种生物活性的天然产物,其经典的合成方法主要为查耳酮路线和β-丙二酮路线.近年来出现了许多新技术、新方法.本文介绍了2'-羟基查尔酮的氧化关环法、黄烷酮氧化法、改进的Baker-Venkataraman法及其他合成黄酮化合物的方法.