丁硝胺乙基硝酸酯合成2-叠氮乙基丁硝胺反应动力学研究

丁硝胺乙基硝酸酯（BuNENA）叠氮化是合成2-叠氮乙基丁硝胺（BuAENA）的经典方法.利用高效液相色谱法跟踪反应过程中原料浓度随时间的变化情况,对该反应动力学进行了研究.通过对实验数据的拟合,得出了62,70和80℃下的反应速率常数.结果表明反应为二级反应,分反应级数各为一级,反应的表观活化能Ea为85.06 kJ...     

微波合成3,3’-双叠氮甲基环氧丁烷-3-叠氮甲基-3’-甲基环氧丁烷无规共聚物

以1,4-丁二醇/三氟化硼·乙醚为引发体系,通过阳离子开环共聚合方法合成了3,3’-双溴甲基环氧丁烷-3-溴甲基-3’-甲基环氧丁烷(BBMO-BrMMO)无规共聚物,采用13CNMR进行了结构表征.然后用微波法对BBMO-BrMMO无规共聚物进行大分子叠氮化反应,合成了3,3’-双叠氮甲基环氧丁烷-3-叠氮甲基-3’-甲基环氧丁烷(BAMO-AMMO)无规共聚物,并对叠氮化反应动力学进行了研究.结果表明,BBMO-BrMMO无规共聚物的共聚组成和微观序列分布可以通过调节单体的物质的量配比实现可控性.叠氮化反应速率由相转移催化剂四丁基溴化铵(TBAB)的用量控制,反应速率常数为k=48.85L/(mol·h)(TBAB=1%);k=51.95L/(mol·h)(TBAB=5%);k=62.72L/(mol·h)(TBAB=10%).微波法缩短了叠氮化反应时间,提高了合成过程的安全性,并且未改变共聚物的链结构.     

水热反应温度对三维还原氧化石墨烯的形貌、结构和超级电容性能的影响

以氧化石墨凝胶制备的氧化石墨烯溶胶为前驱体,在120-220°C条件下,采用水热法制备了系列不同还原程度的三维还原氧化石墨烯,采用扫描电镜(SEM),X射线衍射(XRD),傅里叶变换红外(FTIR)光谱,X射线光电子能谱(XPS)和电化学测试等手段研究了水热反应温度对材料形貌、结构和超级电容性能的影响.结果表明:采用水热法制备的三维还原氧化石墨烯呈多孔网状结构,材料的体积和内部网状孔径随着水热反应温度的升高而减小;同时,氧化石墨烯的还原程度随反应温度的升高而增加,有序度提高,其结构逐渐向着类石墨结构转化;而材料的比电容和能量密度则随反应温度的升高呈现出先增大后减小的趋势,且均以双电层电容为主;相比之下,当水热反应温度为180°C时,制备的三维还原氧化石墨烯具有最佳的超级电容性能,在电解液为6mol·L-1的KOH溶液中,0.5A·g-1电流密度下其比电容达到315 F·g-1,10 A·g-1时仍能保持212 F·g-1的高比容量,能量密度为40.5Wh·kg-1,5000次循环后比电容保持率为86%,表现出了良好的电化学性能.     

改性固化单宁对稀土离子Pr3+,Nd3+吸附性能研究

以苎麻纤维为基础,通过甲醛交联固化杨梅单宁制备吸附材料(RF-BT),进一步经Mannich反应改性,引入-NH2,制备改性苎麻纤维接枝杨梅单宁吸附材料(RF-BTM)。通过IR和SEM等方法表征了两种材料的结构,并研究了两种材料对Pr3+,Nd3+稀土离子的吸附性能。实验结果表明:反应温度为303 K,p H为5.5,Pr3+溶液初始浓度为1127.2 mg·L-1,Nd3+溶液初始浓度为1153.6 mg·L-1时,RF-BT的最大吸附量为:Pr3+420.3 mg·g-1,Nd3+432.8 mg·g-1;RF-BTM的最大吸附量为:Pr3+461.7 mg·g-1,Nd3+477.8 mg·g-1;表现出优良的吸附性能,其吸附热力学符合Freundlich方程,动力学可用拟二级速率方程描述。     

高比容量二氧化钌电极材料制备

以无定型Ru O2·x H2O和金属Ru粉末为反应物,采用高温固相反应制备了Na型层状氧化钌(NaRu O2),通过离子交换反应对Na-Ru O2实现了剥离,得到了氧化钌纳米层胶体分散液。将氧化钌纳米层分散液冷冻干燥处理后得到了氧化钌重组物(ERRu O2)。通过XRD和SEM对制备试样进行了分析表征。电化学测试结果表明,在0.5 mol L-1H2SO4水溶液中,当电流密度为0.25 A g-1时,ERRu O2电极比电容高达645 F g-1,远远高于前驱体Ru O2·x H2O的比电容(367 F·g-1),并且ERRu O2电极表现出与前驱物相似的循环稳定性,是一种性能优异的超级电容器电极材料。     

金属复合催化剂对煤气化的暂态动力学研究

采用阶跃扰动技术进行了金属复合催化剂对煤气化的暂态动力学研究。根据实验结果推导得出了该反应过程是催化剂表面富氧活性部位先与煤焦反应生成一个CO分子，然后此CO分子从催化剂表面脱附，接着催化剂吸附气态的CO2生成一个CO并且夺得一个氧原子实现自身还原的过程，在此基础上建立了煤的催化气化的物料平衡方程组，对各步骤的反应速率常数进行了求解，在本文采用的实验条件下，各反应步骤的反应速率常数分别为0.0703 mol·g-1·min-1·kPa-1;0.0959 mol·g-1·min-1·kPa-1;0.00539 mol·g-1·min-1·kPa-1; 0.0321mol·g-1·min-1·kPa-1。由此得出了该反应历程的控制步骤为CO2的吸附步骤等历程信息。     

Microwave Synthesis of 3,3＇-Bisazidomethyl Oxetane-3-Azidomethyl-3＇-Methyl Oxetane Random Copolymer

以1,4-丁二醇/三氟化硼·乙醚为引发体系,通过阳离子开环共聚合方法合成了3,3＇-双溴甲基环氧丁烷-3-溴甲基-3＇-甲基环氧丁烷（BBMO-BrMMO）无规共聚物,采用13CNMR进行了结构表征.然后用微波法对BBMO-BrMMO无规共聚物进行大分子叠氮化反应,合成了3,3＇-双叠氮甲基环氧丁烷-3-叠氮甲基-3＇-甲基环氧丁烷（BAMO-AMMO）无规共聚物,并对叠氮化反应动力学进行了研究.结果表明,BBMO-BrMMO无规共聚物的共聚组成和微观序列分布可以通过调节单体的物质的量配比实现可控性.叠氮化反应速率由相转移催化剂四丁基溴化铵（TBAB）的用量控制,反应速率常数为k=48.85L/（mol·h）（TBAB=1%）;k=51.95L/（mol·h）（TBAB=5%）;k=62.72L/（mol·h）（TBAB=10%）.微波法缩短了叠氮化反应时间,提高了合成过程的安全性,并且未改变共聚物的链结构.     

气相中W~+活化CO_2分解的自旋禁阻反应机理

用密度泛函理论中的UB3LYP方法,对W采用相对论校正赝势基组(SDD),对C、O采用6-311+G(3d)基组,研究了气相中不同自旋态W+活化CO2分解的反应机理.计算结果表明,W+活化CO2分解反应以六重态进入反应通道,经过六重态势能面到四重态势能面的系间窜越(ISC),最后产物WO+和CO以四重态离开反应通道.运用Harvey方法优化出最低能量交叉点(MECP),并计算了MECP处的自旋-轨道耦合(SOC)常数(494.95cm-1),势能面的交叉和在MECP处较强的自旋-轨道耦合作用降低了自旋禁阻反应能垒,为反应提供了一条低能反应路径,反应总放热量为122.33kJ.mol-1.     

无模板剂合成用于超级电容器的二氧化锰/石墨烯复合材料(英文)

以尿素、四水合氯化锰和氧化石墨烯为原料,采用水热法并通过热分解制备了一种具有石墨烯包覆结构的石墨烯-二氧化锰复合材料,利用扫描电子显微镜、X射线衍射、比表面积(BET)、拉曼光谱和热失重等技术对其形貌、晶体结构及表面结构进行了表征;在三电极条件下利用循环伏安法、恒流充放电法和交流阻抗法测试了材料的电化学性能,并考察了不同石墨烯含量对材料比电容的影响.结果表明,在不添加模板剂的条件下制备的复合材料中二氧化锰是具有介孔结构的α-MnO2,当复合15%(质量分数)的石墨烯后材料的比表面积从109 m2·g-1提高到168 m2·g-1.复合材料具有更好的电化学性能,在0.2 A·g-1电流密度下复合材料的比电容达到最大值(454 F·g-1),远高于纯二氧化锰的值(294 F·g-1).在2 A·g-1的电流密度下恒流充放电2000次后复合材料的比电容保持率为92%.     

哑铃型磁金介孔硅复合微球的制备及磁/光热催化性能测定

以金纳米粒为种子采取外延氧化生长氧化铁的方式,制备了哑铃型磁金纳米复合材料(Au-Fe_3O_4);以十六烷基三甲基溴化铵(CTAB)和F127为双模板剂通过溶胶凝胶法进一步包覆了介孔二氧化硅层(Au-Fe_3O_4@mSiO_2)。所制备Au-Fe_3O_4纳米粒子呈哑铃型,单分散性较好,尺寸分布均一,粒径为12～15 nm。Au-Fe_3O_4@mSiO_2复合物磁热性能与浓度和外加磁场强度成正比;浓度为25 mg·mL~(-1)时,磁场电流从25.5 A增大到42.5 A,溶液升温速率从0.39℃·min~(-1)增大到0.76℃·min~(-1)。Au-Fe_3O_4@mSiO_2复合物光热性能与浓度和激光照射功率密度成正比;复合物浓度为25 mg·mL~(-1)时,功率密度从0.3 W·cm~(-2)增大到1.2 W·cm~(-2),溶液升温速率从0.69℃·min~(-1)增大到2℃·min~(-1)。相同浓度的复合物溶液,光热性能明显优于磁热性能。浓度为25 mg·mL~(-1)的AuFe_3O_4@mSiO_2复合物催化S-亚硝基谷胱甘肽(GSNO)释放NO的反应在60 min时达到持续稳定释放,释放量最大为9.743μmol·L~(-1)。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

解决能源问题的新途径--光解水制氢的研究

面对日益枯竭的能源危机,氢能是一种洁净、最有前景的替代能源。目前在各种制氢的方法中光催化分解水制氢的研究最多,光解水过程中催化剂最关键,本文对利用太阳能光解水的途径、提高光催化反应效率以及光催化剂的开发研究进行了综述。