Catalytically Promoted NO x Sorption by ZrO2-Based Oxides

Metal promoted zirconia-based oxide sorbents, such as Pt–ZrO₂/Al₂O₃ for NO _x have been investigated. To clarify the role of the catalyst component, sorption of NO and NO₂ was compared using the samples with and without Pt. The catalytic oxidation of NO to NO₂ and successively to nitrate ions is an important role for the Pt catalyst. The experimental results indicate that a high-temperature calcination is essential to remove residual Cl from Pt–ZrO₂–Al₂O₃ prepared from H₂PtCl₆ in order to provide more active NO _x sorption sites. Of M–ZrO₂–Al₂O₃ samples investigated, ruthenium as well as Pt demonstrated relatively good performance as a catalyst component in the sorbent. The FT-IR spectra after sorption of NO and NO₂ demonstrated a strong band attributed to stored nitrate ions. The Pt catalyst was more resistant to sulfur poisoning than a base metal catalyst. However, the NO _x sorptive capacities of the Pt–ZrO₂/Al₂O₃ sorbents were expected to be deteriorated in dilute SO₂ as far as observed from FT-IR spectra.     

NOx-Sorbing Metal Oxides, MnOx–CeO2. Oxidative NO Adsorption and NOx–H2 Reaction

(n)MnO_x–(1–n)CeO₂ binary oxides have been studied for the sorptive NO removal and subsequent reduction of NO_x sorbed to N₂ at low temperatures (150 °C). The solid solution with a fluorite-type structure was found to be effective for oxidative NO adsorption, which yielded nitrate (NO^– ₃) and/or nitrite (NO^– ₂) species on the surface depending on temperature, O₂ concentration in the gas feed, and composition of the binary oxide (n). A surface reaction model was derived on the basis of XPS, TPD, and DRIFTS analyses. Redox of Mn accompanied by simultaneous oxygen equilibration between the surface and the gas phase promoted the oxidative NO adsorption. The reactivity of the adsorbed NO_x toward H₂ was examined for MnO_x–CeO₂ impregnated with Pd, which is known as a nonselective catalyst toward NO–H₂ reaction in the presence of excess oxygen. The Pd/MnO_x–CeO₂ catalyst after saturated by the NO uptake could be regenerated by micropulse injections of H₂ at 150 °C. Evidence was presented to show that the role of Pd is to generate reactive hydrogen atoms, which spillover onto the MnO_x–CeO₂ surface and reduce nitrite/nitrate adsorbing thereon. Because of the lower reducibility of nitrate and the competitive H₂–O₂ combustion, H₂–NO reaction was suppressed to a certain extent in the presence of O₂. Nevertheless, Pd/MnO_x–CeO₂ attained 65% NO-conversion in a steady stream of 0.08% NO, 2% H₂, and 6% O₂ in He at as low as 150 °C, compared to ca. 30% conversion for Pd/–Al₂O₃ at the same temperature. The combination of NO_x-sorbing materials and H₂-activation catalysts is expected to pave the way to development of novel NO_x-sorbing catalysts for selective deNO_x at very low temperatures.     

国产航空煤油裂解催化剂Pt/ZrxTixAl1-2xO2的性能

采用共沉淀法制备了一系列Zr_xTi_xAl_1-2xO₂复合氧化物载体材料,考察了其作为裂解催化剂载体对航空煤油裂解反应的影响.?采用全自动吸附仪、X射线衍射、扫描电镜/能谱仪联用、NH₃-程序升温脱附等手段对催化剂进行了表征.?结果表明,当ZrO₂：TiO₂：Al₂O₃质量比为1：1：3时催化剂具有最大的比表面积和孔容;具有最强的表面酸性和最集中的强酸中心密度,且具有良好的再生功能.?实验结果表明,载体ZrO₂：TiO₂：Al₂O₃质量比为1：1：3时催化剂上650?℃裂解产气量较热裂解提高了2.1倍,700?℃时提高1.4倍.?另外,该系列载体材料经1000?℃焙烧5?h后,所制得的催化剂几乎失去了催化活性.     

Activity of bifunctional Pt-Dy/Al2O3 catalysts in hydrocarbon reactions

The conversions ofn-hexane and methylcyclopentane on Pt–Dy/Al₂O₃ containing different amounts of Dy have been investigated in a pulsed microcatalytic reactor. The poisoning effect of thiophene on the activity of Pt–Dy/Al₂O₃ for n-hexane conversion has been studied. The influence of Dy over Pt–Dy/Al₂O₃ is also discussed.     

用于NO_x低温下吸附还原的CoO_x/CeO_2二元氧化物的制备

研究了以多孔二氧化硅微球和活性炭为载体制备NOx吸附/还原催化剂的方法,摸索了最佳Ce/Co物质的量的比例。采用低温氮吸附方法测定了样品的BET比表面和孔容,利用XRD方法表征了样品中所掺杂的金属元素的晶型。研究发现:当nCe/nCo=75/25时,材料获得最佳NOx吸附能力,当以多孔二氧化硅微球作载体时,材料对于NOx的吸附主要来自CoOx和CeO2的二元氧化物;当以活性炭作为载体时,活性炭参与了NOx的吸附,因此其吸附容量大大提高。对NOx的吸附机理进行了探讨,并研究了样品的NH3还原性质。     

Preparation of Silicates Using HSi(OC2H5)3 and Their NO x -Adsorption Behavior

The preparation and NO-adsorption/desorption behavior of Li, Ca and Ba silicates were investigated aiming at the application to a NO_x-absorbent. Li silicate was prepared by reaction of HSi(OC₂H₅)₃ with aqueous lithium silicate solution (LSS). Ca and Ba silicates were prepared from gels obtained using CH₃Si(OC₂H₅)₃, Si(OC₂H₅)₄, HSi(OC₂H₅)₃ and alkaline-earth alkoxides. The surface of these silicates indicated the solid basicity of H₀ = 9 and adsorbed the acidic gas of NO. FT-IR spectra of the silicates adsorbing NO showed the absorption peaks in the range of 1300–1600 cm^{– 1} corresponding to ionic and covalent nitrate NO₃^–. The complete desorption of adsorbed NO species occurred above 500°C in the Li silicate, above 500°C in the Ca and Ba silicates prepared using CH₃Si(OC₂H₅)₃, and above 700°C in the Ba and Ca silicates prepared using Si(OC₂H₅)₄. Regarding the Ca and Ba silicates, the difference in siloxane structure is thought to cause the difference in adsorption state and desorption behavior of NO.     

Oxidation and Reduction Processes During NO x Removal with Corona-Induced Nonthermal Plasma

In this paper, the NO-to-NO ₂ conversion in various gaseous mixtures is experimentally investigated. Streamer coronas are produced with a dc-superimposed high-frequency ac power supply (10–60 kHz). According to NO _x removal experiments in N ₂ +NO _x and N ₂ +O ₂ +NO _x gaseous mixtures, it is supposed that the reverse reaction NO ₂ +ONO+O ₂ may not only limit NO ₂ production in N ₂ +NO _x mixtures, but also increase the energy cost for NO removal. Oxygen could significantly suppress reduction reactions and enhance oxidation processes. The reduction reactions, such as N+NON ₂ +O, induce negligible NO removal provided the O ₂ concentration is larger than 3.6%. With adding H ₂ O into the reactor, the produced NO ₂ per unit removed NO can be significantly reduced due to NO ₂ oxidation. NH ₃ injection could also significantly decrease the produced NO ₂ via NH and NH ₂ - related reduction reactions. Almost 100% of NO ₂ can be removed in gaseous mixtures of N ₂ +O ₂ +H ₂ O+NO ₂ with negligible NO production.     

NO2对Cu/SAPO-34分子筛催化剂上NH3选择性催化还原NO性能的影响

主要考察了NO₂对Cu/SAPO-34 分子筛催化剂在整个温度范围内（100-500 ℃）NH₃选择性催化还原（SCR）NO性能的影响. 研究所使用样品为新鲜Cu/SAPO-34 催化剂在750 ℃下水热处理4 h 的稳定期样品.通过X射线衍射（XRD）和扫描电子显微镜（SEM）对样品的结构以及形貌进行表征,采用SCR活性评价、动力学实验以及原位漫反射傅里叶变换红外光谱（in situ-DRIFTS）表征催化剂的性能以及催化剂表面物种的变化. 活性评价实验结果表明,NO₂会抑制催化剂的低温（100-280 ℃）活性,但其存在会提高催化剂的高温（280 ℃以上）活性. 与此同时,随着反应物中NO/NO₂的摩尔比例减少,由于NH₄NO₃物种的分解,副产物（N₂2O）的浓度增大. 动力学结果表明,Cu/SAPO-34 催化剂上快速SCR反应的表观活化能（E_a=64.02 kJ·mol^-1）比标准SCR反应的表观活化能（E_a=48.00 kJ·mol^-1）更大. In situ-DRIFTS实验结果表明NO比NO₂更容易在催化剂表面形成硝酸盐,并且NO₂更容易与吸附在Brønsted 酸性位上的NH₃物种反应生成NH₄NO₃. 低温下,催化剂表面的NH₄NO₃物种会覆盖SCR反应的活性位,造成活性降低,但在高温时,形成的NH₄NO₃物种一部分会被NO还原为N2,而另一部分会直接热分解为N₂O,造成催化剂的选择性降低.     

合成方法对Rh/CeO2-ZrO2-La2O3催化剂的结构、表面性能及DeNOx活性的影响

用沉积沉淀法合成两种不同系列的CeO2-ZrO2-La2O3混合氧化物(ZrO2和La2O3沉积CeO2粒子(标记为A-x)以及CeO2和La2O3沉积ZrO2粒子(标记为B-x)),并用作Rh催化剂的载体。XRD、拉曼、TPR、XPS和O2脉冲等表征结果显示出不同的沉积顺序将导致不同的结构和氧化还原性能,且B-x具有更高的氧迁移性、储氧能力和表面Ce浓度。当其负载Rh后,Rh/B-x催化剂具有更高的NO和CO转化率及N2选择性,且Ce的最佳含量为50at%。这可能归因于Rh负载于富铈表面形成更多有利于NO分解的表面Ce3+活性位。     

荧光XAFS表征Pt/BaAl2O4-Al2O3催化剂中的微量铂物种

随着稀薄燃烧(lean-burn)发动机的推广使用和环保法规的日趋严格,消除稀燃尾气中的氮氧化物(N O x)已刻不容缓。N O x储存还原技术被认为是最具应用前景的方法之一[1,2]。目前,对Pt/BaA l2O4-A l2O3体系中N O x储存与还原机制的研究较多[1￣4],但对该体系中微量铂物种微观结构及其与性能的关系研究较少,这主要是由于Pt含量(0.1w t%￣0.5wt%)太低,分散度较高,使表征方法受到很大限制。本文采用共沉淀-浸渍法制得具有较高比表面积和热稳定性的N O x储存还原催化剂Pt/BaA l2O4-A l2O3,应用荧光X-射线吸收精细结构方法(Fluores-cence-…     

低于300℃时两种氧化铈材料对稀燃阶段NOx存储性能的影响

研究了低于300 ℃时两种氧化铈对稀燃阶段NO_x存储性能的影响,催化剂由2%（w）Pt/Al₂O₃（PA）与CeO₂-X（X=S,I）机械混合制备. X射线衍射（XRD）,BET表面积和扫描电子显微镜（SEM）用于表征材料的物理结构. X射线光电子能谱（XPS）和H₂程序升温还原（H₂-TPR）用于表面Ce³⁺和活性氧定量. 原位漫反射傅里叶变换红外光谱（in-situ DRIFTS）用于分析表面NO_x吸附物种. 相比于CeO₂-I,CeO₂-S 具有优良的物理化学性能,包括高比表面积、丰富的空隙结构、较高的抗老化能力及表面Ce³⁺浓度. 因而,Pt/Al₂O₃+CeO₂-S 表现出优异的NO_x存储能力. 此外,PA+CeO₂-X（X=S,I）上存在Pt 与CeO₂之间的相互作用,可提高表面氧物种的活性进而促进NO氧化及NO_x存储. PA+CeO₂-S上的这种相互作用要强于PA+CeO₂-I. 研究表明,表面Ce³⁺浓度和活性氧含量对NO_x存储起到重要作用. 然而经过水热处理后,Pt 与老化的氧化铈（ACS,ACI）之间的相互作用降低,并且两种氧化铈NO_x存储性能显著下降. 另外,与PA+ACS（ACI）相比,PA+PACS（PACI）样品NO_x存储能力得到改善,这归因于表面氧物种活性增加能促进硝酸盐的形成.     

富氧条件下Co/ZSM-5催化剂对C_3H_8选择还原NO_x的性能

采用多种物理化学手段研究了在模拟的轻型柴油车尾气中不同Co担载量及Cu掺杂的Co/ZSM-5催化剂的Co组分分散状态、可还原性、NO吸附脱附性质对C3H8选择性催化还原NOx性能的影响。结果表明,浸渍法制备的Co/ZSM-5催化剂上既有外表面上的Co3+和Co2+物种,也有孔内的Co2+离子。富氧条件下Co/ZSM-5催化剂上C3H8选择性催化还原NOx的活性主要与ZSM-5载体孔外表面分散的CoOx物种中的钴离子可还原能力和NO吸附脱附性能密切相关。Co/ZSM-5催化剂上适宜的Co担载量约为4.0wt%,低担载量时随Co担载量增加,表面CoOx物种中钴离子可还原能力增强,C3H8选择性催化还原NOx的低温转化活性增加;高担载量时,随Co担载量增加,单位Co离子的NO吸附量的减少以及催化剂表面活性中心数的减少,导致了Co/ZSM-5催化剂NOx的转化率和催化剂比速率(k)的下降。孔外表面Co3O4晶体的存在使催化剂表面产生较强的NO吸附,并在高温时有利于C3H8的氧化燃烧,使C3H8选择性催化还原NOx的活性降低。     

Review of Ag/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Reductant System in the Selective Catalytic Reduction of NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>

Ag/Al₂O₃ is a promising catalyst for the selective catalytic reduction (SCR) by hydrocarbons (HC) of NO _x in both laboratory and diesel engine bench tests. New developments of the HC-SCR of NO _x over a Ag/Al₂O₃ catalyst are reviewed, including the efficiencies and sulfur tolerances of different Ag/Al₂O₃-reductant systems for the SCR of NO _x ; the low-temperature activity improvement of H₂-assisted HC-SCR of NO _x over Ag/Al₂O₃; and the application of a Ag/Al₂O₃-ethanol SCR system with a heavy-duty diesel engine. The discussions are focused on the reaction mechanisms of different Ag/Al₂O₃-reductant systems and H₂-assisted HC-SCR of NO _x over Ag/Al₂O₃. A SO₂-resistant surface structure in situ synthesized on Ag/Al₂O₃ by using ethanol as a reductant is proposed based on the study of the sulfate formation. These results provide new insight into the design of a high-efficiency NO _x reduction system. The diesel engine bench test results showed that a Ag/Al₂O₃-ethanol system is promising for catalytic cleaning of NO _x in diesel exhaust.     

Effect of conversion of NO2 into no on the catalytic reduction of NO2 with C3H6 in excess O2

During the reduction of NO₂ by C₃H₆ in O₂ over alumina-supported Au, Rh and Pt it was found that three parallel reactions take place,i.e., reduction of NO₂ to N₂ and N₂O, partial decomposition of NO₂ to NO and oxidation of C₃H₆ to CO and CO₂. In the absence of C₃H₆, the NO₂→NO+O₂ reaction reaches a fast equilibrium on Rh and Pt but not on Au and γ-Al₂O₃. Addition of C₃H₆ to the NO₂+O₂ mixture leads to the formation of NO above equilibrium conversion levels.     

还原剂对La0.7Sr0.3Co0.8Fe0.2O3钙钛矿催化剂NOx储存性能的影响

采用溶胶-凝胶法制备了La0.7Sr0.3Co0.8Fe0.2O3钙钛矿催化剂,考察了还原剂种类(CO,C3H6,H2)对催化剂在氮氧化物储存还原(NSR)循环前后的氮氧化物储存量(NSC)和NO-to-NO2转化率的影响.O2程序升温脱附(O2-TPD)实验结果表明,CO还原后的钙钛矿催化剂上形成了较多的氧空位,而氧空位则是一种有效的NOx储存活性中心.活性测试和傅里叶红外变换(FTIR)光谱表征结果显示:在NSR循环中,以CO为还原剂时催化剂显示了最佳的氮氧化物(NOx)储存效果.进一步的研究结果显示,当采用CO作为还原剂时,经过三次NSR循环后,催化剂中出现了Sr3Fe2O7新物相,而该物相可能具有比La0.7Sr0.3Co0.8Fe0.2O3钙钛矿更佳的NOx储存性能.综上所述,CO作为还原剂时可能使钙钛矿催化剂产生更多的氧空位以及更易于储存NOx的Sr3Fe2O7物相,这些原因使其NOx储存性能得到了大幅度改善.     

Point and Multipoint to Plane Barrier Discharge Process for Removal of NOx from Engine Exhaust Gases: Understanding of the Reactional Mechanism by Isotopic Labeling

An experimental study on the removal of NO_x in a simulated vehicle exhaust gas has been carried out using point to plane and multipoint to plane DBD corona reactors. Hydrocarbon (C₃H₆) and NO_x by-products were systematically investigated with a Gas Chromatography coupled to a Mass Spectrometry (GC/MS). NO_x (NO and NO₂) and CO output were also monitored with a gas analyzer in order to complete the mass balance. ¹⁸O tracer technique analyzes is applied to investigate the mechanism of propylene decomposition. From the plasma chemical reaction pathway proposed, it is apparent that the oxygen activation is one of the important steps for initiating the oxidation processes and the R-NO_x formation. We present data for the reaction of the (N₂/O₂/C₃H₆/CO₂NO/H₂O system in the corona discharge reactors mentioned above. This system has been shown to generate a significant amount of aldehyde. CH₃NO₂ and CH₃ONO₂ are the main R-NO_x compounds produced. Reactant composition and discharge energy densities (controlled by a numerical oscilloscope) were the operating parameters under study in wet and dry air mixture. Water vapors played an important role in NO_x removal (especially in NO₂ removal) via the reaction forming HNO₃. Therefore, in wet-gas mixture supplied reactors the highest removal rates of NO_x were as high as 30%, while in dry-gas only 15%. Different dielectric materials such as Al₂O₃/SiO₂ and TiO₂ on Al₂O₃/SiO₂ support have been used.     

Conversion of NO in NO/N2, NO/O2/N2, NO/C2H4/N2 and NO/C2H4/O2/N2 Systems by Dielectric Barrier Discharge Plasmas

An experimental study on the conversion of NO in the NO/N₂, NO/O₂/N₂, NO/C₂H₄/N₂ and NO/C₂H₄/O₂/N₂ systems has been carried out using dielectric barrier discharge (DBD) plasmas at atmospheric pressure. In the NO/N₂ system, NO decomposition to N₂ and O₂ is the dominating reaction; NO conversion to NO₂ is less significant. O₂ produced from NO decomposition was detected by an on-line mass spectrometer. With the increase of NO initial concentration, the concentration of O₂ produced decreases at 298 K, but slightly increases at 523 K. In the NO/O₂/N₂ system, NO is mainly oxidized to NO₂, but NO conversion becomes very low at 523 K and over 1.6% of O₂. In the NO/C₂H₄/N₂ system, NO is reduced to N₂ with about the same NO conversion as that in the NO/N₂ system but without NO₂ formation. In the NO/C₂H₄/O₂/N₂ system, the oxidation of NO to NO₂ is dramatically promoted. At 523 K, with the increase of the energy density, NO conversion increases rapidly first, and then almost stabilizes at 93–91% of NO conversion with 61–55% of NO₂ selectivity in the energy density range of 317–550 J L⁻¹. It finally decreases gradually at high energy density. A negligible amount of N₂O is formed in the above four systems. Of the four systems studied, NO conversion and NO₂ selectivity of the NO/C₂H₄/O₂/N₂ system are the highest, and NO/O₂/C₂H₄/N₂ system has the lowest electrical energy consumption per NO molecule converted.     

Nox Reduction Characteristics for Different Composition Ratios of Pt/Al2O3, Rh/Al2O3 Catalyst Mixtures Using Model Gas as Reformates

This study investigated the selective catalytic reduction (SCR) of nitrogen oxides (NO_x) with hydrocarbon in the presence of excess oxygen using various composition ratios of Pt/Al₂O₃, Rh/Al₂O₃ catalyst mixtures. The composition ratios were 1:1, 1:2, 2:1, 1:3 and 3:1 of 1 wt% Pt/Al₂O₃ and Rh/Al₂O₃, which are known to exhibit efficient NO_x reduction at low and high temperatures among the noble metal catalysts. Experiments conducted on a single reductant revealed that more efficient NO_x conversion could be obtained when Pt/Al₂O₃ and Rh/Al₂O₃ were mixed at a ratio of 3:1, rather than 1:1 or 1:3. In a single reductant condition, C₃H₆ 800 ppm (2400 ppmC₁) and 400 ppm (1200 ppmC₁) exhibited 50% and 38% NO_x conversion efficiency at 200°C, respectively. However, NO_x conversion efficiency gradually decreased when temperatures were increased above 250°C. With regard to Pt/Al₂O₃ and Rh/Al₂O₃ ratio, higher ratios of Rh/Al₂O₃ activated this Pt+Rh/Al₂O₃ catalyst in the high temperature range.     

富氧条件下Co/ZSM-5催化剂对C3H8选择还原NOx的性能

采用多种物理化学手段研究了在模拟的轻型柴油车尾气中不同Co担载量及Cu掺杂的Co/ZSM-5催化剂的Co组分分散状态、可还原性、NO吸附脱附性质对C₃H₈选择性催化还原NO_x性能的影响。结果表明,浸渍法制备的Co/ZSM-5催化剂上既有外表面上的Co³⁺和Co²⁺物种,也有孔内的Co²⁺离子。富氧条件下Co/ZSM-5催化剂上C₃H₈选择性催化还原NO_x的活性主要与ZSM-5载体孔外表面分散的CoO_x物种中的钴离子可还原能力和NO吸附脱附性能密切相关。Co/ZSM-5催化剂上适宜的Co担载量约为4.0wt%,低担载量时随Co担载量增加,表面CoO_x物种中钴离子可还原能力增强,C₃H₈选择性催化还原NO_x的低温转化活性增加;高担载量时,随Co担载量增加,单位Co离子的NO吸附量的减少以及催化剂表面活性中心数的减少,导致了Co/ZSM-5催化剂NO_x的转化率和催化剂比速率（k）的下降。孔外表面Co₃O₄晶体的存在使催化剂表面产生较强的NO吸附,并在高温时有利于C₃H₈的氧化燃烧,使C₃H₈选择性催化还原NO_x的活性降低。     

BaFeO3-x与Cu-ZSM-5耦合催化剂的NOx储存还原性能

为替代传统的贵金属基NO_x储存还原（NSR）催化剂,本文设计并制备了不含贵金属的BaFeO_3-x+Cu-ZSM-5 耦合催化剂,用于催化消除稀燃发动机尾气中的NO_x. 在稀燃阶段,NO在BaFeO_3-x催化剂上发生了氧化和储存反应;在富燃阶段,从BaFeO_3-x催化剂中脱附出来未能消除的NO_x被置于其后的Cu-ZSM-5催化剂进一步催化消除. 实验结果表明,BaFeO_3-x+Cu-ZSM-5 耦合催化剂的工作温度窗口被拓宽到250-400 ℃,同时NO_x消除性能得到了显著提高：NO_x转化率最高可达98%,N₂选择性接近100%.