Unexpected Macrocyclic Multinuclear Zinc and Nickel Complexes that Function as Multitasking Catalysts for CO2 Fixations

Unique self‐assembled macrocyclic multinuclear Zn^II and Ni^II complexes with binaphthyl‐bipyridyl ligands (L) were synthesized. X‐ray analysis revealed that these complexes consisted of an outer ring (Zn₃L₃ or Ni₃L₃) and an inner core (Zn₂ or Ni). In the Zn^II complex, the inner Zn₂ part rotated rapidly inside the outer ring in solution on an NMR timescale. These complexes exhibited dual catalytic activities for CO₂ fixations: synthesis of cyclic carbonates from epoxides and CO₂ and temperature‐switched N‐formylation/N‐methylation of amines with CO₂ and hydrosilane.     

A Theoretical study on the charge and discharge states of Na-ion battery cathode material,Na1+xFePO4F

Na₂FePO₄F is a promising cathode material for a Na-ion battery because of its high electronic capacity and good cycle performance. In this work, first principle calculations combined with cluster expansion and the Monte Carlo method have been applied to analyze the charge and discharge processes of Na₂FePO₄F by examining the voltage curve and the phase diagram. As a result of the density functional theory calculation and experimental verification with structural analysis, we found that the most stable structure of Na_1.5FePO₄F has the P2₁/b11 space group, which has not been reported to date. The estimated voltage curve has two clear plateaus caused by the two-phase structure composed of P2₁/b11 Na_1.5FePO₄F and Pbcn Na₂FePO₄F or Na₁FePO₄F and separated along the c-axis direction. The phase diagram shows the stability of the phase-separated structure. Considering that Na₂FePO₄F has diffusion paths in the a- and c-axis directions, Na₂FePO₄F has both innerphase and interphase diffusion paths. We suggest that the stable two-phase structure and the diffusion paths to both the innerphase and interphases are a key for the very clear plateau. We challenge to simulate a nonequilibrium state at high rate discharge with high temperature by introducing a coordinate-dependent chemical potential. The simulation shows agreement with the experimental discharge curve on the disappearance of the two plateaus. © 2018 Wiley Periodicals, Inc.     

Site-Selective Supramolecular Complexation Activates Catalytic Ethane Oxidation by a Nitrido-Bridged Iron Porphyrinoid Dimer

Development of supramolecular methods to further activate a highly reactive intermediate is a fascinating strategy to create novel potent catalysts for activation of inert chemicals. Herein, a supramolecular approach to enhance the oxidizing ability of a high-valent oxo species of a nitrido-bridged iron porphyrinoid dimer that is a known potent molecular catalyst for light alkane oxidation is reported. For this purpose, a nitrido-bridged dinuclear iron complex of porphyrin-phthalocyanine heterodimer 3 ⁵⁺, which is connected through a fourfold rotaxane, was prepared. Heterodimer 3 ⁵⁺ catalyzed ethane oxidation in the presence of H₂O₂ at a relatively low temperature. The site-selective complexation of 3 ⁵⁺ with an additional anionic porphyrin (TPPS⁴⁻) through π–π stacking and electrostatic interactions afforded a stable 1:1 complex. It was demonstrated that the supramolecular post-synthetic modification of 3 ⁵⁺ enhances its catalytic activity efficiently. Moreover, supramolecular conjugates achieved higher catalytic ethane oxidation activity than nitrido-bridged iron phthalocyanine dimer, which is the most potent iron-oxo-based molecular catalyst for light-alkane oxidation reported so far. Electrochemical measurements proved that the electronic perturbation from TPPS⁴⁻ to 3 ⁵⁺ enhanced the catalytic activity.     

Finely Controlled Circularly Polarized Luminescence of a Mechano‐Responsive Supramolecular Polymer

Finely controlled circularly polarized luminescence (CPL) supramolecular polymerization based on a tetraphenylethene core with four l ‐ or d ‐alanine branch side chains (l ‐ 1 and d ‐ 1 ) in the solution state is presented, resulting from the tuning of mechanical stimulus. Weak, green emissions of l ‐ 1 and d ‐ 1 in tetrahydrofuran (THF) were converted into strong blue emissions by tuning the mechanical stimulus. The strong blue emissions were caused by an aggregation‐induced emission (AIE) effect during the formation of a supramolecular polymer. Lag time in the supramolecular polymerization was drastically reduced by the mechanical stimulus, which was indicative of the acceleration of the supramolecular polymerization. A significant enhancement of circular dichroism (CD) and CPL signals of l ‐ 1 and d ‐ 1 was observed by tuning the rotational speed of the mechanical stimulus, implying that the chiral supramolecular polymerization was accelerated by the mechanical stimulus.     

D3h‐Symmetric Porphyrin‐Based Rigid Macrocyclic Ligands for Multicofacial Multinuclear Complexes in a One‐Nanometer‐Sized Cavity

The one‐step synthesis of D_3h‐symmetric cyclic porphyrin trimers 1 composed of three 2,2′‐[4,4′‐bis(methoxycarbonyl)]bipyridyl moieties and three porphyrinatozinc moieties was achieved from a nickel‐mediated reductive coupling of meso‐5,15‐bis(6‐chloro‐4‐methoxycarbonylpyrid‐2‐yl)porphyrinatozinc. Although cyclic trimers 1 were obtained as a mixture that included other cyclic and acyclic porphyrin oligomers, an extremely specific separation was observed only for cyclic trimers 1 when using columns of silica gel modified with pyrenylethyl, cyanopropyl, and other groups. Structural analysis of cyclic trimers 1 was carried out by means of NMR spectroscopy and X‐ray crystallography. Treatment of an η³‐allylpalladium complex with a cyclic trimer gave a tris(palladium) complex containing three η³‐allylpalladium groups inside the space, which indicated that the bipyridyl moieties inside the ring could work as bidentate metalloligands.     

Synthesis of C12-Keto Saxitoxin Derivatives with Unusual Inhibitory Activity Against Voltage-Gated Sodium Channels

A novel series of C12-keto-type saxitoxin (STX) derivatives bearing an unusual nonhydrated form of the ketone at C12 has been synthesized, and their Na_V-inhibitory activity has been evaluated in a cell-based assay as well as whole-cell patch-clamp recording. Among these compounds, 11-benzylidene STX ( 3 a ) showed potent inhibitory activity against neuroblastoma Neuro 2A in both cell-based and electrophysiological analyses, with EC₅₀ and IC₅₀ values of 8.5 and 30.7 nm , respectively. Interestingly, the compound showed potent inhibitory activity against tetrodotoxin-resistant subtype of Na_V1.5, with an IC₅₀ value of 94.1 nm . Derivatives 3 a – d and 3 f showed low recovery rates from Na_V1.2 subtype (ca 45–79 %) compared to natural dcSTX ( 2 ), strongly suggesting an irreversible mode of interaction. We propose an interaction model for the C12-keto derivatives with Na_V in which the enone moiety in the STX derivatives 3 works as Michael acceptor for the carboxylate of Asp¹⁷¹⁷.     

Synthesis and Systematic Structural Analysis of Cationic Half-Sandwich Ruthenium Chalcogenocarbonyl Complexes

Although the chemistry of transition-metal complexes with carbonyl (CO) and thiocarbonyl (CS) ligands has been well developed, their heavier analogues, namely selenocarbonyl (CSe) and tellurocarbonyl (CTe) complexes remain scarce. The limited availability of such CSe and CTe complexes has so far hampered our understanding of the differences between such chalcogenocarbonyl (CE: E=O, S, Se, Te) ligands. Herein, we report the synthesis and properties of a series of cationic half-sandwich ruthenium CE complexes of the type [CpRu(CE)(H₂IMes)(CNCH₂Ts)][BAr^F₄] (Cp=η⁵-C₅H₅⁻; H₂IMes=1,3-dimesitylimidazolin-2-ylidene; Ar^F=3,5-(CF₃)₂C₆H₃). A combination of X-ray diffraction analyses, NMR spectroscopic analyses, and DFT calculations revealed an increasing π-accepting ability of the CE ligands in the order O<S<Se<Te. A variable-temperature NMR analysis of the thus obtained chiral-at-metal CE complexes indicated high stereochemical stability.     

Alkane Shape- and Size-Recognized Selective Vapor Sorption in “Channel-Like” Crystals Based on Thiacalixarene Assemblies

Alkanes composed of C−C and C−H show a low electric polarization, and therefore, there is only very weak interaction between alkanes and adsorbents. Thus, it is difficult to separate a specific alkane from a mixture of alkanes by adsorption. Here, two activated “channel-like” crystals generated from brominated thiacalix[4]arene propyl ethers, which adopt 1,3-alternate and partial cone conformations, recognize specific alkane vapors depending on alkane-shape and -size, sorting in three-type alkane guests such as linear, branched, and cyclic alkanes. Two activated crystals, which are prepared by removal of solvent upon heating under reduced pressure, incorporate branched and/or cyclic alkane vapors by a unique “gate-opening” mechanism via a crystal transformation in the process. Linear alkane vapors do not trigger gate opening and are not taken up by the activated crystals. The shape and size molecular-recognition properties of the activated crystals promises considerable usefulness for the separation of linear, branched, and cyclic alkanes.     

Visible-Light-Induced Heptacene Generation under Ambient Conditions: Utilization of Single-crystal Interior as an Isolated Reaction Site

The photo-induced generation of unstable molecules generally requires stringent conditions to prevent oxidation and the concomitant decomposition of the products. The visible-light-induced conversion of two heptacene precursors to heptacene was studied. Single crystals of bis- and mono-α-diketone-type heptacene precursors ( 7-DK2 and 7-DK1 , respectively), were prepared to investigate the effect of precursor structure on reactivity. The photoirradiation of a 7-DK2 single crystal cleaved only one α-diketone group, forming an intermediate bearing a pentacene subunit, while that of a 7-DK1 single crystal gave rise to characteristic absorption peaks of heptacene and their increase in intensity with photoirradiation time, indicating the generation of heptacene without decomposition. Heptacene production was not observed when the precursors were photoirradiated in solution, implying that the single crystal interior provided isolation from the external environment, thus preventing heptacene oxidation.