吡哌酸分子印迹聚合物的分子识别

采用分子印迹技术合成了吡哌酸分子印迹聚合物。运用平衡结合实验研究了聚合物的吸附特性和选择性识别能力。Scatchard分析表明,在本文所研究的浓度范围内,聚合物中形成了两类不同的结合位点。吡哌酸分子印迹聚合物对吡哌酸呈现较高的选择识别特性,可作为固相萃取剂,在人血清吡哌酸的分析中对样品进行了有效的提取和净化。     

Preparation of molecularly imprinted polymers with thiourea group for phosphate

Molecularly imprinted polymers selective for phosphate were prepared with the two types of functional monomers, 1-allyl-2-thiourea and N-methyl-N′-(4-vinylphenyl)-thiourea, and the binding abilities of the polymers were evaluated. Phenylphosphonic acid or diphenyl phosphate were used as the template molecules and the imprinted polymers prepared with 1-allyl-2-thiourea as functional monomer showed high binding ability to phosphate in aqueous media and nearly 90% of phosphate could be recovered. Also, the imprinted polymer prepared with N-methyl-N′-(4-vinylphenyl)-thiourea as functional monomer had a high binding ability and specific interaction with phosphate in acetonitrile solution and over 90% of phosphate-derivatives could be recovered selectively.     

微球形4-氨基吡啶分子模板聚合物的合成及结合性质研究

利用分子印迹技术,通过沉淀聚合方法合成了对4-氨基吡啶具有选择性结合能力的微球形分子模板聚合物.通过静态结合方法研究了该聚合物的选择性结合能力以及不同溶剂及引发剂的用量对聚合物形态及球状聚合物粒径大小的影响.底物选择性实验结果表明,与结构相似的化合物相比,4-氨基吡啶球形分子模板聚合物对4-氨基吡啶显示出强的选择性.     

尼卡地平分子聚合物的制备及识别性能研究

采用分子印迹技术合成了以尼卡地平为模板分子,甲基丙烯酸为功能单体的分子印迹聚合物(MIP).运用平衡结合实验研究了聚合物的吸附特性和选择识别能力.通过Scatchard方程分析,结合位点的离解常数Kd=1.03 mmol·L-1,最大表观结合常数Qmax=18.76 μmol·g-1.结果表明,分子印迹聚合物对尼卡地平呈现出较高的吸附性和选择识别性,对尼卡地平药物的分离富集和检测具有实际临床意义.     

药物头孢氨苄分子模板聚合物水中结合性质的研究

采用分子模板技术合成了以头孢氨苄为模板分子以三氟甲基丙烯酸和４－乙烯基吡啶同时为功能单体的分子模板聚合物。将得到的棒状聚合物研磨过筛后,运用平衡结合实验研究了头孢氨苄分子模板聚合物的结合性质,Ｓｃａｔｃｈａｒｄ分析表明,在所研究的浓度范围内,在聚合物中形成了两类不同的结合位点。头孢氨苄分子模板聚合物与其化学组成相同的非模板聚合物相比,有很高的结合容量。底物选择性实验表明,与其它结构相似的药物相比,     

4-氨基吡啶分子模板聚合物选择性识别及结合性质的研究

以4-氨基吡啶为模板分子制备了对4-氨基吡啶具有特异选择性的模板聚合物.制得的棒状聚合物经研磨、过筛后,采用平衡结合方法评价了该模板聚合物的结合特性.Scatchard分析表明,在所研究的浓度范围内,聚合物中形成了两类不同的结合位点,这两类结合位点的离解常数采用多点结合模型计算得到的值分别为6.0μmol/L和1.2mmol/L.底物选择性表明,与其它结构相似的分子相比,该聚合物对模板分子4-氨基吡啶显示了很强的结合能力.₁HNMR研究及4-氨基吡啶共振结构分析表明,模板分子与聚合物中的结合位点之间的作用为离子作用.     

胆酸印迹聚合物的制备及在含水介质中的结合性能

为了在含水介质中进行有效印迹,本研究中以双甲基丙烯酰-β-环糊精（BMA-β-CD）和2-(二乙基胺基)乙基甲基丙烯酸酯(DEAEM)为功能单体制备了胆酸印迹聚合物MIP1,并用平衡结合实验研究了MIP1在含水介质中对模板分子的识别能力。结果表明,MIP1比单独以BMA-β-CD或DEAEM为功能单体制备的印迹聚合物MIP2和MIP3,显示出对模板分子更好的选择性结合能力。MIP1的特异性吸附量ΔCP为38.81μmol/g,印迹因子IF为2.46。研究表明,在含水介质中,利用模板分子与功能单体之间的疏水作用和离子作用是提高印迹聚合物分子识别能力的关键。研究还表明,在识别过程中,疏水作用在驱动分子进入印迹孔穴时起重要作用。     

光接枝表面修饰法制备牛血红蛋白的分子印迹微球

聚苯乙烯球载体表面经引发转移终止剂修饰后, 采用光接枝表面印迹方法制备了以牛血红蛋白(BHb)为模板分子、丙烯酰胺为功能单体和N,N′-亚甲基双丙烯酰胺为交联剂的分子印迹聚合物微球(MIP). 进一步采用红外光谱(IR)、扫描电子显微镜(SEM)和元素分析对聚合物微球进行了表征, 证实了载体表面成功地接枝了分子印迹层, 并研究了其吸附性能和分子识别选择性能. 结果表明, 采用光接枝表面修饰法制备的分子印迹微球对模板分子有着很好的吸附容量和识别选择性.     

环丙沙星分子印迹聚合物的合成及识别性能研究

采用分子印迹技术合成了以环丙沙星为印迹分子,以甲基丙烯酸和4-乙烯基吡啶同时为功能单体的分子印迹聚合物。运用平衡结合实验研究了印迹聚合物的吸附特性和选择识别能力。Scatchard分析表明,在所研究的浓度范围内,分子印迹聚合物中形成了两类不同的结合位点。底物选择实验表明,这种聚合物对环丙沙星呈现高的选择结合能力。     

内分泌干扰物雌酮分子印迹新型吸附功能材料的制备及其选择性能研究

采用分子印迹本体聚合法,制备了对内分泌干扰物雌酮具有高选择识别能力的分子印迹聚合物。吸附动力学和选择性实验结果表明,与非印迹聚合物相比,印迹聚合物具有较高的吸附容量和吸附速率,对模板分子具有较高的选择性。聚合反应条件对印迹聚合物的吸附和识别性能有重要影响,以丙烯酰胺为功能单体,模板分子、功能单体和交联剂摩尔比为1:3:6,制备的印迹聚合物具有较高的选择和吸附性能。     

Molecularly imprinted polymer for metsulfuron-methyl and its binding characteristics for sulfonylurea herbicides

A molecularly imprinted polymer (MIP) was prepared using metsulfuron-methyl (MSM) as the template molecule. A combinatorial protocol has been employed to optimize the polymer in terms of the kind and relative amounts of functional and cross-linking monomers. A copolymer of 2-(trifluoromethyl)acrylic acid (TFMAA) and divinylbenzene (DVB) showed the highest binding capacity for MSM. The binding characteristics of the imprinted polymers and MSM were evaluated in various solvents using equilibrium binding experiments. The results showed that the MIP binds MSM only in dichloromethane, which was used as the porogen during polymerization. Scatchard plot analysis revealed that two classes of binding sites were formed in the imprinted polymer with dissociation constants of 32.3 μmol l⁻¹ and 1.7 mmol l⁻¹, respectively. The specificity of the imprinted polymer was investigated by binding assays using MSM and other structurally related sulfonylurea herbicides. The results indicated that the imprinted polymer showed a marked selectivity for MSM.     

Evaluation of a molecularly imprinted polymer for the isolation/enrichment of β-estradiol

The selective preconcentration of estradiol was explored using the recognition ability of a molecularly imprinted polymer (MIP) in the solid phase extraction (SPE) format. Polymeric particles were imprinted with 17β-estradiol using methacrylic acid as functional monomer and divinylbenzene as crosslinker. Binding studies of these polymeric particles towards 17β-estradiol showed selectivity over non-imprinted polymers, using acetonitrile as solvent. The imprinted polymer showed a recovery of 88% for β-estradiol in deionized water and 81% in surface water. The selectivity of the MIP over the non-imprinted polymer was relatively low, only 10% higher recovery. The results indicate that the MIP imprinted with 17β-estradiol does not appear to provide a viable approach to be used in a sample clean-up or enrichment step for the determination of estradiol in aqueous systems.     

Preparation of sterol-imprinted polymers with the use of 2-(methacryloyloxy)ethyl phosphate.

Steroid-selective polymers were prepared by the molecular imprinting technique, using 2-(methacryloyloxy)ethyl phosphate as functional monomer. The retentivity and selectivity of the obtained imprinted polymers were evaluated by liquid chromatography. The cholesterol-imprinted polymer showed higher affinity for cholesterol than that for cholesterol derivatives. The selectivity of the imprinted polymer was superior to the imprinted polymer prepared with the conventional functional monomer, 2-(trifluoromethyl)acrylic acid. Estradiol was also imprinted and gave similar results, demonstrating that 2-(methacryloyloxy)ethyl phosphate would be suitable for imprinted polymers of cholesterol and related compounds.     

Preparation and Cyclic Voltammetry Characterization of Cu—dipyridyl Imprinted Polymer

Polymer capable of specific binding to Cu-dipyridyl complex was prepared by molecular imprinting technology. The binding specificity of the polymer to the template (Cu-dipyridyl complex) was in vestigated by cyclic voltametric scanning using the carbon paste electrode modified by polymer particles in phosphate buffer solution. Factors that influence rebinding of the imprinted polymer were explored. The result demonstrated that the cycllic voltammetry was an efficient approach to explore interactions between template and imprinted polymers.     

烟碱分子烙印聚合物的吸附特性

利用分子烙印技术，以烟碱为烙印分子，甲基丙烯酸(MAA)为功能单体，乙二醇二甲基丙烯酸酯(EDMA)为交联剂，合成了对烟碱具有特异性作用的分子烙印聚合物P(Nic)；通过平衡吸附实验，评价了其对烟碱的亲和力和选择性。与非烙印聚合物相比，P(Nic)对烟碱表现了很高的亲和力；Scatchard分析表明在P(Nic)中存在对烟碱有不同的亲和力的两类作用位点。通过与氨基吡啶类物质在P(Nic)上的吸附行为比较，表明P(Nic)对烟碱具有很好的选择性。本工作证明了用P(Nic)作为固相萃取(SPE)材料选择性地从烟草烟雾中提取烟碱的可能性。     

A comparative study of the potential of acrylic and sol-gel polymers for molecular imprinting

The successful molecular imprinting of 2-aminopyridine (2-apy) in bulk polymerisations of acrylic and sol-gel based polymers has been achieved. Both polymeric systems reveal varying degrees of affinity in rebinding the original template as well as a number of structural analogues. Rebinding was conducted in chloroform, acetonitrile and methanol in order to assess the role of hydrogen bonding in imprinting. The acrylic imprinted polymer retained approximately 50% of the template in rebinding studies in chloroform compared to 100% for the sol-gel. However, this higher affinity for the sol-gel was accompanied by a higher degree of non-specific binding. While the acrylic polymer performed poorly in acetonitrile, the sol-gel maintained a high degree of discrimination.The acrylic polymer exhibited little discrimination between imprinted and reference polymers for 3-aminopyridine (3-apy) indicating the high selectivity of the MIP polymer for 2-apy relative to 3-apy. This selectivity was reduced in acetonitrile. Selectivity of the sol-gel for 2-apy in chloroform was poor as 3-apy was retained to a similar degree. Comparable results were obtained in acetonitrile. 4-Aminopyridine (4-apy) bound strongly to all polymers in all solvents and proved very difficult to remove due to the high degree of non-specific binding for both polymeric matrices.     

L-色氨酸分子印迹传感器敏感膜的制备与性能

以L-色氨酸(L-Trp)为模板分子, 邻苯二胺(o-PD)为功能单体, 在金电极表面原位合成了分子印迹聚合物敏感膜; 通过循环伏安法(CV)、 差示脉冲伏安法(DPV)和电化学阻抗谱法(EIS)考察了该电极的性能. DPV测试结果表明, 在1×10^-8~2×10^-7 mol/L范围内, 峰电流与L-Trp的浓度呈线性关系, 检出限为0.3×10^-8 mol/L; 选择识别性实验结果表明, L-Trp印迹敏感膜的印迹因子达到3.72, 相对于干扰物的选择因子均大于1, 对与L-Trp结构相似的L-酪氨酸(L-Tyr)的选择因子也达到2.30, 说明该印迹膜对L-Trp具有良好的选择性; 识别过程动力学研究结果表明, 印迹膜对L-Trp的识别是一个两步连续发生的过程, 即快结合过程和慢吸附过程.     

Noncovalently galactose imprinted polymer for the recognition of different saccharides

Molecularly imprinted polymers (MIPs) represent a new class of materials possessing high selectivity and affinity for the target molecule. The main goal of this study was to prepare a galactose imprinted polymer and its potential application for the recognition of different saccharides. The selectivity of galactose imprinted polymer for several saccharides; glucose, mannose, fructose, maltose, lactose, sucrose and raffinose was investigated. Macroporous polymer was prepared utilizing ethyleneglycoldimethacrylate as a crosslinking agent, in the presence of galactose as a template molecule with acrylamide as a functional monomer. After the synthesis of polymer, galactose was removed by methanol:acetic acid washing. The selectivity of galactose imprinted polymer for other saccharides was utilized by batch rebinding assay. The arrangement of functional groups within cavities versus shape selectivity is discussed. The results showed that, the orientation of the functional groups was the dominating factor for the selectivity of galactose imprinted polymer. The dissociation constants of polymer were determined by Scatchard analysis.     

分子烙印聚合物作为高效毛细管电泳添加剂的研究

分子洛印聚合物（molecular imprinted polymer)是一种高选择的有分子记忆效应的主体分子,通常在非极性环境中制备和应用。该文在极性溶剂中利用离子化作用和疏水作用制备了非共价的分子烙印聚合物,并将其作为高效毛细管电泳流动相添加剂;在含水缓冲溶液条件下,研究了单体种类、分子烙印聚合物颗粒度和含量、缓冲溶液pH值以及分离电压对分子烙印聚合物识别模板分子的影响。结果证明了在质子溶剂中制备和应用非共价分子烙印聚合物是可行的。     

Synthesis and Application of Tetracycline Imprinted Polymer

Molecular imprinted polymer was synthesized by polymerization of methacrylate and ethylene glycol dimethacrylate in presence of tetracycline. The prepared polymer exhibited selectivity of 1.8 to 3.9 over non-imprinted polymer depending on nature of solvent. In water, 3.45 mg of tetracycline bind to 1 g of imprinted polymer. Non-covalent interactions between tetracycline and polymer provided selectivity to imprinted polymer. The polymer was evaluated in column chromatography and the bound tetracycline can be eluted with acetonitrile. Ciprofloxacin interacted with imprinted polymer, whereas amoxicillin did not. The feasibility of using MIP for concentrating tetracycline from milk has been demonstrated.