药物扑热息痛分子模板聚合物的选择性富集与识别特性研究

采用分子印迹技术合成了对药物扑热息痛有高选择性的模板聚合物。通过Ｓｃａｔｃｈａｒｄ分析研究了模板聚合物的结合特性;研究了模板聚合物的结合动力学。结果表明,以丙烯酰胺为功能单体的模板聚合物比以甲基丙烯酸为功能单体的聚合物具有更高的结合容量。     

二茂铁甲酸分子印迹聚合物的制备和识别机理、结合特性

以二茂铁甲酸（FCA）为模板,选用不同的功能单体制备了一系列分子印迹聚合物,用平衡结合实验考察了它们对模板分子的结合性能。 结果表明,以甲基丙烯酸为功能单体制得的印迹聚合物P1对模板分子有很好的选择性,特异性吸附量ΔCP为23.18 μmol/g,印迹因子IF为2.33,竞争性结合实验结果表明,P1可以将模板分子从结构类似物中分离出来。 Scatchard方程研究表明,在研究的浓度范围内聚合物中形成了一类等价的结合位点,其对模板分子的平衡离解常数K=1.94 mmol/L,最大表观结合量Cpmax=92.33 μmol/g。 研究还表明,FCA的羧基是在聚合物的孔穴中产生识别位点的功能基,模板分子上的羧基与MAA的羧基形成双重氢键作用是分子识别的主要作用力。     

4-氨基吡啶分子模板聚合物选择性识别及结合性质的研究

以4-氨基吡啶为模板分子制备了对4-氨基吡啶具有特异选择性的模板聚合物.制得的棒状聚合物经研磨、过筛后,采用平衡结合方法评价了该模板聚合物的结合特性.Scatchard分析表明,在所研究的浓度范围内,聚合物中形成了两类不同的结合位点,这两类结合位点的离解常数采用多点结合模型计算得到的值分别为6.0μmol/L和1.2mmol/L.底物选择性表明,与其它结构相似的分子相比,该聚合物对模板分子4-氨基吡啶显示了很强的结合能力.₁HNMR研究及4-氨基吡啶共振结构分析表明,模板分子与聚合物中的结合位点之间的作用为离子作用.     

农药丙溴磷分子印迹聚合物微球的制备与结合性能研究

采用分子印迹技术,以丙溴磷为模板分子,分别以α-甲基丙烯酸和丙烯酰胺为功能单体,在乙腈溶液中合成了2种对丙溴磷具有选择性结合能力的分子印迹聚合物.紫外光度法研究表明,模板分子丙溴磷与α-甲基丙烯酸之间的作用强于其与丙烯酰胺之间的作用;扫描电镜的研究则表明以α-甲基丙烯酸为功能单体合成的分子印迹聚合物呈微球形,粒径约为0.5 ～2 μm;利用平衡结合实验研究了不同功能单体制备的聚合物对模板分子的结合能力及其对底物的选择性,经Scatchard模型分析,求出了聚合物的最大表观结合量(Qmax)和平衡离解常数(Kd)分别为49.44 μmol/g 和1.05 mmol/L.研究表明以α-甲基丙烯酸为功能单体合成的分子印迹聚合物对丙溴磷表现出更强的结合能力和更高的选择性.     

微球形4-氨基吡啶分子模板聚合物的合成及结合性质研究

利用分子印迹技术,通过沉淀聚合方法合成了对4-氨基吡啶具有选择性结合能力的微球形分子模板聚合物.通过静态结合方法研究了该聚合物的选择性结合能力以及不同溶剂及引发剂的用量对聚合物形态及球状聚合物粒径大小的影响.底物选择性实验结果表明,与结构相似的化合物相比,4-氨基吡啶球形分子模板聚合物对4-氨基吡啶显示出强的选择性.     

卡维地洛印迹聚合物的合成及其识别性能的研究

以卡维地洛药物分子为模板,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用紫外光引发聚合的分子印迹技术,成功制备出卡维地洛分子印迹聚合物。用热重分析、扫描电镜对聚合物进行了表征,通过Scatchard方程研究了印迹聚合物对模板分子的结合特性。结果表明,在所研究的浓度范围内,印迹聚合物存在一类等价的结合位点,并计算出印迹聚合物与模板分子的平衡离解常数为0.5642 mmol/L,最大表观吸附量为97.44μmol/g,为理论值的63.53%。对不同底物的结合实验表明,该聚合物对卡维地洛具有优良的吸附选择性。     

苏丹红Ⅰ分子印迹聚合物分子识别特性的波谱分析

以苏丹红Ⅰ为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,通过沉淀聚合法合成了高选择性的分子印迹聚合物。通过静态吸附实验研究了聚合物的吸附性能,采用紫外光谱(UV)和核磁共振氢谱(1 H NMR)法研究了聚合物的识别机理。实验结果表明:模板分子和功能单体之间的作用为分子间氢键;红外(IR)光谱研究进一步表明,印迹聚合物通过非共价氢键作用特异性地识别模板分子。     

头孢氨苄分子印迹聚合物制备及其性能研究

采用不同合成方法制备了头孢氨苄分子的印迹聚合物,考察了模板分子与功能单体之间的结合作用,测定了其吸附性能,用扫描电镜对其表面做了表征.结果表明:在甲醇体系中,用丙烯酰胺作功能单体,采用本体聚合法制备的印迹聚合物的吸附能力更好,对模板的单位结合量达到29.6mg/g,特异因子达3.29.     

印迹奎宁聚合物的合成及性能研究

以奎宁为模板分子．分别采用光引发和热引发的本体聚合方法制备了印迹奎宁的聚合物。用红外光谱(IR)、热重分析(TG)、电镜扫描(SEM)对聚合物进行了表征,用结合实验研究了聚合物对不同底物的选择性。采用Seatchard方程研究了模板聚合物对奎宁的结合特性。研究了模板聚合物对奎宁的结合量随时间的变化趋势。     

沉淀聚合法制备右旋邻氯扁桃酸分子印迹聚合物微球

以右旋邻氯扁桃酸为模板,丙烯酰胺、乙二醇二甲基丙烯酸酯分别为功能单体和交联剂,采用沉淀聚合法制备了分子印迹聚合物微球,讨论了反应介质用量、聚合温度、引发剂的种类和用量对印迹微球的影响。实验表明：分子印迹微球与传统本体聚合法制备的聚合物相比具有更高的特异识别能力,通过Scatchard分析研究了聚合物的选择结合性能,结果表明分子印迹聚合物微球在识别右旋邻氯扁桃酸分子的过程中存枉两类结合位点,而空白聚合物微球只存在一类结合位点。     

伊诺沙星分子印迹聚合物的制备及分子识别性能研究

以伊诺沙星为印迹分子、甲基丙烯酸为功能单体、季戊四醇三丙烯酸酯为交联剂,合成了对伊诺沙星有较好选择性的印迹聚合物。利用铽敏化荧光,通过静态平衡结合法和Scatchard分析法研究了此印迹聚合物的结合能力和选择性,结果表明印迹聚合物对伊诺沙星有较高的亲和性和选择性。     

环丙沙星分子印迹聚合物的合成及识别性能研究

采用分子印迹技术合成了以环丙沙星为印迹分子,以甲基丙烯酸和4-乙烯基吡啶同时为功能单体的分子印迹聚合物。运用平衡结合实验研究了印迹聚合物的吸附特性和选择识别能力。Scatchard分析表明,在所研究的浓度范围内,分子印迹聚合物中形成了两类不同的结合位点。底物选择实验表明,这种聚合物对环丙沙星呈现高的选择结合能力。     

Preparation of 17β‐estradiol‐imprinted material by surface‐initiated atom transfer radical polymerization and its application

A novel 17β‐estradiol molecularly imprinted polymer was grafted onto the surface of initiator‐immobilized silica by surface‐initiated atom transfer radical polymerization. The resulting molecularly imprinted polymer was characterized by elemental analysis and thermogravimetric analysis. The binding property of molecularly imprinted polymer for 17β‐estradiol was also studied with both static and dynamic methods. The results showed that the molecularly imprinted polymer possessed excellent recognition capacity for 17β‐estradiol (180.65 mg/g at 298 K), and also exhibited outstanding selectivity for 17β‐estradiol over the other competitive compounds (such as testosterone and progesterone). Then, the determination of trace 17β‐estradiol in beef samples was successfully developed by using molecularly imprinted polymer solid‐phase extraction coupled with high‐performance liquid chromatography. The limit of detection was 0.25 ng/mL, and the amount of 17β‐estradiol in beef samples was detected at 2.83 ng/g. This work proposed a sensitive, rapid, reliable, and convenient approach for the determination of trace 17β‐estradiol in complicated beef samples.     

吡哌酸分子印迹聚合物的分子识别

采用分子印迹技术合成了吡哌酸分子印迹聚合物。运用平衡结合实验研究了聚合物的吸附特性和选择性识别能力。Scatchard分析表明,在本文所研究的浓度范围内,聚合物中形成了两类不同的结合位点。吡哌酸分子印迹聚合物对吡哌酸呈现较高的选择识别特性,可作为固相萃取剂,在人血清吡哌酸的分析中对样品进行了有效的提取和净化。     

Towards bilirubin imprinted poly(methacrylic acid-co-ethylene glycol dimethylacrylate) for the specific binding of α-bilirubin

With α-bilirubin as a molecular template, polymerization of methacrylic acid (MAA) was carried out with the aid of the initiator 2,2-azobisisobutyronitrile (AIBN) and the cross-linking agent ethylene glycol dimethylacrylate (EGDMA). Bulk polymerization was successfully carried out so that poly(methacrylic acid-co-ethylene glycol dimethylacrylate) (poly(MAA-EGDMA)) imprinted with α-bilirubin was first developed. UV irradiation polymerization and heated polymerization methods were compared. Effect of different ratios of monomer to EGDMA during the polymerization was also discussed. Proper solvent for better desorption of α-bilirubin from the imprinted poly(MAA-EGDMA) was investigated. In addition, SEM photos were provided for observing the differences between the surfaces of the imprinted poly(MAA-EGDMA) before and after extraction. The corresponding binding results of α-bilirubin imprinted poly(MAA-EGDMA) and non-imprinted poly(MAA-EGDMA) both after extraction were compared. How the pH values during extraction stage affected the binding capacities of the imprinted polymer as well as non-imprinted polymer were also discussed. Similar study and comparison were made for different binding pH values. Different compounds of similar molecular weight were used to show the specific binding of the imprinted polymer for bilirubin. The results further confirmed the successful binding as well as specificity of the imprinted poly(MAA-EGDMA) for α-bilirubin.     

Molecularly imprinted polymer for metsulfuron-methyl and its binding characteristics for sulfonylurea herbicides

A molecularly imprinted polymer (MIP) was prepared using metsulfuron-methyl (MSM) as the template molecule. A combinatorial protocol has been employed to optimize the polymer in terms of the kind and relative amounts of functional and cross-linking monomers. A copolymer of 2-(trifluoromethyl)acrylic acid (TFMAA) and divinylbenzene (DVB) showed the highest binding capacity for MSM. The binding characteristics of the imprinted polymers and MSM were evaluated in various solvents using equilibrium binding experiments. The results showed that the MIP binds MSM only in dichloromethane, which was used as the porogen during polymerization. Scatchard plot analysis revealed that two classes of binding sites were formed in the imprinted polymer with dissociation constants of 32.3 μmol l⁻¹ and 1.7 mmol l⁻¹, respectively. The specificity of the imprinted polymer was investigated by binding assays using MSM and other structurally related sulfonylurea herbicides. The results indicated that the imprinted polymer showed a marked selectivity for MSM.     

Selectivity and recovery performance of phosphate-selective molecularly imprinted polymer

A phosphate-selective molecularly imprinted polymer was prepared using 1-allyl-2-thiourea as a functional monomer, and the binding ability and selectivity of the polymer were evaluated. The imprinted polymer showed high binding ability to and selectivity for phosphate in aqueous media. The recoverability of phosphate from the imprinted polymer was also examined, and nearly 70% of highly concentrated phosphate could be recovered.     

Molecular recognition of endocrine disruptors by synthetic and natural 17β-estradiol receptors: a comparative study

A β-estradiol receptor binding mimic was synthesised using molecular imprinting. Bulk polymers and spherical polymer nanoparticles based on methacrylic acid and ethylene glycol dimethacrylate as the functional monomer and crosslinker, respectively, were prepared in acetonitrile. The selectivity was evaluated by radioligand binding assays. The imprinted polymers were very specific to β-estradiol since the control polymers bound virtually none of the radioligand. The bulk polymer was then employed to screen endocrine disrupting chemicals. Structurally related steroids like α-estradiol, estrone and ethynylestradiol showed, respectively, 14.0, 5.0 and 0.7% of relative binding to the β-estradiol polymer, whereas most unrelated chemicals did not bind at all. These results are compared to those obtained with a bioassay using stably transfected yeast cells in culture bearing the human estrogen receptor. The receptor was activated by several estrogen-like chemicals and to a lesser extent by some structurally related chemicals. Figure A molecularly imprinted polymer that was a synthetic receptor for beta-estradiol was used for the screening of endocrine disrupting chemicals that are structurally related or unrelated to beta-estradiol. The results were compared with the recognition of the compounds by the biological estrogen receptor expressed in yeast cells. Related steroids like alpha-estradiol, estrone and ethynylestradiol showed significant binding to the beta-estradiol imprinted polymer, whereas most unrelated chemicals did not bind. The biological receptor was activated by several estrogen-like chemicals, and to a lesser extent by some structurally related chemicals