环丙沙星分子印迹聚合物的制备及其吸附特性的研究

以环丙沙星(CIP)为模板分子,α-甲基丙烯酸(MAA)为功能单体,三甲基丙烯酸三羟甲基丙烷酯(TRIM)为交联剂,进行热聚合.通过对于功能单体和交联剂的用量对分子印迹聚合物吸附性能的影响的研究,得到最佳的聚合配比为n(CIP):n(MMA):n(TRJM)=1:6:16,并以此配比制得了对环丙沙星具有特异选择性吸附的分子印迹聚合物.通过静态平衡结合法研究了模板聚合物的结合动力学以及该聚合物的结合能力和选择特性,通过Scatchard分析法研究了印迹聚合物对模板分子的结合特性.结果表明,该印迹聚合物具有良好的吸附能力和吸附选择性,静态吸附分配系数KD为41.64,分离因子α为1.62;该印迹聚合物中形成了2类不同的结合位点,经计算它们的离解常数分别为Kd1=5.249×10-5mol·L-1,Kd2=2.237×10-3mol·L-1.     

对羟基苯乙酮分子印迹聚合物的制备及性能研究

采用分子印迹技术,以对羟基苯乙酮为模板分子,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了对模板分子对羟基苯乙酮具有良好选择性的印迹聚合物.通过静态平衡结合法以及Scatchard分析法研究了该聚合物的结合能力和选择性能.结果表明,该印迹聚合物平衡离解常数Kd=0.415 mmol/L,最大表观结合量Qmax=144.79 μmol/g.红外光谱研究表明聚合物中存在着与模板分子相互作用的特征基团.     

磁性胰蛋白酶分子印迹聚合物的制备及性能评价

以壳聚糖修饰的四氧化三铁为载体,利用壳聚糖表面的氨基与戊二醛结合,丙烯酰胺为功能单体和交联剂,胰蛋白酶为模板蛋白,制备了磁性胰蛋白酶分子印迹聚合物。通过静态平衡结合法研究了磁性分子印迹聚合物的吸附能力、选择性。结果表明,与磁性分子非印迹聚合物相比,磁性分子印迹聚合物对模板蛋白具有高选择性和高特异性吸附,最大吸附量为162.2mg·g-1;Scatchard分析表明,存在两类不同的吸附结合位点,其离解常数分别为96.5μg·mL-1(高结合位点)和2.41mg.mL-1(低结合位点)。     

石杉碱甲分子印迹聚合物的制备、表征及其吸附性能

以硅胶为牺牲载体,石杉碱甲为模板分子,甲基丙烯酸为功能单体,二乙烯基苯为交联剂,偶氮二异丁腈为引发剂,首次制备了石杉碱甲分子印迹聚合物,并用红外光谱、扫描电子显微镜和热重分析研究了印迹聚合物的结构特征,用静态吸附法和Scatchard分析法研究了印迹聚合物的识别效能和表面位点分布特征。 结果表明,石杉碱甲印迹聚合物对模板分子具有较好的选择吸附性能,选择系数为1.399。Scatchard分析表明,印迹聚合物基体中主要存有两类吸附位点,对高亲和位点：平衡离解常数Kd1=0.776 g/L,最大表观结合量Qmax1=0.213 mg/g;对低亲和位点：平衡离解常数Kd2=0.169 g/L,最大表观结合量Qmax2=0.832 mg/g。 当该聚合物用于微固相萃取蛇足石杉粗提液中的石杉碱甲时,石杉碱甲回收率为93.5%,显示了较好的富集效果。     

酚酞分子印迹聚合物的制备及特异吸附性能

以泻药酚酞为模板分子,4-乙烯基吡啶为功能单体制备了模板分子和功能单体不同比例的一系列酚酞分子印迹聚合物。利用扫描电镜对聚合物进行了表面形态分析,采用静态平衡实验法研究了聚合物对模板分子及其类似物的吸附行为和选择性识别能力。实验结果表明,所制备的分子印迹聚合物,吸附 3 h 后基本接近最大吸附量,其中模板分子、4-乙烯基吡啶和交联剂的摩尔比为 1∶6∶20的MIP2的印迹因子为 2.30,效果最佳。Scatchard 分析表明, 在所研究的浓度范围内,吸附过程存在两类结合位点,一类高亲和力结合位点的离解常数为Kd1= 0.63 mmol/L,最大表观结合量 Qmax1 = 25.4 umol/g,另一类低亲和力结合位点的离解常数为 Kd2 =3.5 mmol/L,最大表观结合量 Qmax2 = 61.9 umol/g,通过与酚酞类似物质在酚酞分子印迹聚合物上的吸附行为比较,表明对酚酞具有很好的选择性吸附。     

沉淀聚合法制备三聚氰胺分子印迹聚合物微球

以三聚氰胺为模板分子,以甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在乙腈-乙二醇(20∶1,V/V)混合溶剂中沉淀聚合制备了分子印迹聚合物微球.利用1H-NMR和紫外光谱方法研究了模板与功能单体相互作用情况.结果表明,三聚氰胺与甲基丙烯酸(MAA)分子通过协同氢键作用形成1∶2型氢键配合物.利用扫描电镜和红外光谱对聚合物微球的结构进行了表征.结果表明,印迹聚合物近似圆球形,粒径约为400～500 nm,且大于非印迹聚合物微球,表面存在大量的结合位点.通过静态平衡吸附实验研究了聚合物微球对模板分子的结合能力,印迹聚合物微球在4 h后逐渐达到吸附平衡,Scatchard分析表明,印迹聚合物微球主要存在两类不同的结合位点,最大表观结合量(Qmax)和平衡离解常数(Kd)分别为Qmax1=22.97μmol/g,Kd1=0.14×10-3 mol/L;Qmax2=157.65μmol/g,Kd2=2.55×10-3 mol/L,计算得出表观印迹效率和有效印迹效率分别为68%和58%.此方法合成的印迹聚合物微球对三聚氰胺有较好的结合性能,可应用于三聚氰胺的分离检测.     

金属卟啉分子印迹聚合物的合成与性能研究

以5-(4-羟基苯基)-10,15,20-三苯基卟啉锌为印迹分子,4-乙烯基吡啶为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了具有金属卟啉识别能力的分子印迹聚合物.紫外可见滴定光谱研究表明,功能单体与印迹分子在聚合前形成1:1的配合物.通过吸附试验、荧光光谱及斯卡查特分析法,考察了分子印迹聚合物对锌卟啉化合物的识别性能.结果表明,印迹聚合物对结构类似的卟啉化合物具有良好的识别能力,对印迹分子荧光性能的影响远大于其对应的非印迹聚合物.在浓度较低时,印迹聚合物对印迹分子的结合常数和最大结合量分别为:1.61×106L/mol和3.22×10-5mol/g.     

烯唑醇分子印迹聚合物的合成及其吸附性能研究

以烯唑醇为模板分子,MAA为功能单体,EDMA为交联剂,采用本体聚合法合成分子印迹聚合物。考察了采用不同比例的模板分子与功能单体合成的聚合物对烯唑醇的吸附量,通过静态吸附试验研究了烯唑醇分子印迹聚合物对烯唑醇吸附性能的影响,并进行Scatchard分析。由Scatchard分析可知模板分子烯唑醇与功能单体MAA形成了1类结合位点,结合位点的离解常数KD=0.117mmol/L,最大表观结合量Qmax=38.66μmol/g。     

丹参素分子印迹聚合物的制备及吸附性能研究

在硅胶表面接枝乙烯基三乙氧基硅烷得到接枝硅胶,将其与模板分子丹参素、功能单体4-乙烯基吡啶、交联剂乙二醇二甲基丙烯酸酯等,在偶氮二异丁腈引发作用下进行聚合反应,制备丹参素分子印迹聚合物。采用红外光谱、元素分析对分子印迹聚合物进行表征,静态平衡吸附法和Scatchard分析法研究印迹聚合物的吸附特征。结果表明:该印迹化合物存在两种结合位点,它们的离解常数分别为714.29 mg·L-1和467.74 mg·L-1,饱和吸附量分别为9.93 mg·g-1和61.80 mg·g-1,印迹因子分别达1.93和2.19,对丹参素具有较好的选择吸附性能,可用于丹参素的分离和富集。     

二茂铁甲酸分子印迹聚合物的制备和识别机理、结合特性

以二茂铁甲酸（FCA）为模板,选用不同的功能单体制备了一系列分子印迹聚合物,用平衡结合实验考察了它们对模板分子的结合性能。 结果表明,以甲基丙烯酸为功能单体制得的印迹聚合物P1对模板分子有很好的选择性,特异性吸附量ΔCP为23.18 μmol/g,印迹因子IF为2.33,竞争性结合实验结果表明,P1可以将模板分子从结构类似物中分离出来。 Scatchard方程研究表明,在研究的浓度范围内聚合物中形成了一类等价的结合位点,其对模板分子的平衡离解常数K=1.94 mmol/L,最大表观结合量Cpmax=92.33 μmol/g。 研究还表明,FCA的羧基是在聚合物的孔穴中产生识别位点的功能基,模板分子上的羧基与MAA的羧基形成双重氢键作用是分子识别的主要作用力。     

Molecularly imprinted supermacroporous cryogels for cytochrome c recognition

Molecular imprinting is an attractive biomimetic approach that creates specific recognition sites for the shape and functional group arrangement to template molecules. The purpose of this study is to prepare cytochrome c-imprinted poly(hydroxyethyl methacrylate) (PHEMA)-based supermacroporous cryogel which can be used for the separation of cytochrome c from protein mixtures. N-Methacryloyl-(L)-histidinemethylester (MAH) was used as the metal-coordinating monomer. In the first step, Cu(2+) was complexed with MAH, and the cytochrome c imprinted PHEMA (MIP) cryogel was prepared by free radical cryopolymerization initiated by N,N,N',N'-tetramethylene diamine at -12°C. After polymerization is completed, the template cytochrome c molecules were removed from the MIP cryogel using 0.5 M NaCl solution. The maximum cytochrome c binding amount was 126 mg/g polymer. Selective binding studies were performed in the presence of lysozyme and bovine serum albumin. The relative selectivity coefficients of MIP cryogel for cytochrome c/lysozyme and cytochrome c/bovine serum albumin were 1.7 and 5.2 times greater than those of the non-imprinted PHEMA cryogel, respectively. The selectivity of MIP cryogel for cytochrome c was also confirmed with fast protein liquid chromatography. The MIP cryogel could be used many times with no remarkable decrease in cytochrome c binding capacity.     

Development of a model for the rational design of molecular imprinted polymer: Computational approach for combined molecular dynamics/quantum mechanics calculations

A new rational approach for the preparation of molecularly imprinted polymer (MIP) based on the combination of molecular dynamics (MD) simulations and quantum mechanics (QM) calculations is described in this work. Before performing molecular modeling, a virtual library of functional monomers was created containing forty frequently used monomers. The MD simulations were first conducted to screen the top three monomers from virtual library in each porogen-acetonitrile, chloroform and carbon tetrachloride. QM simulations were then performed with an aim to select the optimum monomer and progen solvent in which the QM simulations were carried out; the monomers giving the highest binding energies were chosen as the candidate to prepare MIP in its corresponding solvent. The acetochlor, a widely used herbicide, was chosen as the target analyte. According to the theoretical calculation results, the MIP with acetochlor as template was prepared by emulsion polymerization method using N,N-methylene bisacrylamide (MBAAM) as functional monomer and divinylbenzene (DVB) as cross-linker in chloroform. The synthesized MIP was then tested by equilibrium-adsorption method, and the MIP demonstrated high removal efficiency to the acetochlor. Mulliken charge distribution and ¹H NMR spectroscopy of the synthesized MIP provided insight on the nature of recognition during the imprinting process probing the governing interactions for selective binding site formation at a molecular level. We think the computer simulation method first proposed in this paper is a novel and reliable method for the design and synthesis of MIP.     

Molecular recognition properties of salicylic acid-imprinted polymers

Summary Two molecularly imprinted polymers (MIP) have been prepared using the acidic drug salicylic acid, which can form intramolecular hydrogen bond, as the template and acrylamide or 4-vinylpyridine as the functional monomer. HPLC was used to evaluate the binding performance of the MIP for the template and for several analogues. The results showed that the MIP (P₂) prepared using acrylamide as the functional monomer had no molecular imprinting effect whereas that (P₁) prepared using 4-vinylpyridine as the functional monomer had a significant molecular imprinting effect. The reason the molecular imprinting effect was different for the two MIP was elucidated and the molecular recognition properties of P₁ were studied in detail. It was confirmed that electrostatic interaction played an important role in the molecular recognition of P₁. Scatchard analysis showed that two types of binding site with distinctly different affinity were formed in P₁. Their dissociation constants were estimated to be 7.6×10⁻⁵ mol L⁻¹ and 3.2×10⁻³ mol L⁻¹, respectively. Because P₁ has high affinity and selectivity for salicylic acid not only in organic systems but also in water-containing systems, it gives P₁ the potential for use in the enrichment, separation, and detection of salicylic acid in biological fluids.     

胆酸印迹聚合物的制备及在含水介质中的结合性能

为了在含水介质中进行有效印迹,本研究中以双甲基丙烯酰-β-环糊精（BMA-β-CD）和2-(二乙基胺基)乙基甲基丙烯酸酯(DEAEM)为功能单体制备了胆酸印迹聚合物MIP1,并用平衡结合实验研究了MIP1在含水介质中对模板分子的识别能力。结果表明,MIP1比单独以BMA-β-CD或DEAEM为功能单体制备的印迹聚合物MIP2和MIP3,显示出对模板分子更好的选择性结合能力。MIP1的特异性吸附量ΔCP为38.81μmol/g,印迹因子IF为2.46。研究表明,在含水介质中,利用模板分子与功能单体之间的疏水作用和离子作用是提高印迹聚合物分子识别能力的关键。研究还表明,在识别过程中,疏水作用在驱动分子进入印迹孔穴时起重要作用。     

基于多齿功能单体的三聚氰胺印迹材料的制备及应用

以三聚氰胺(MEL)为模板分子, 采用沉淀聚合方法研究了以衣康酸(IA)为多齿功能单体, 乙二醇二甲基丙烯酸酯(EGDMA)为交联剂时, 组分之间摩尔比对三聚氰胺印迹聚合物(MIP)选择性的影响. 研究发现, 当MEL与IA摩尔比为1:1.5时, 所合成的MIP对三聚氰胺具有最佳选择性, 选择性系数k=10.41(以三聚氰酸为对照物). 此时IA的识别位点(羧基)与三聚氰胺的可识别位点(胺基)摩尔比为1:1, 因此, 不会出现由过量功能单体引起的非特异性吸附. Scatchard分析结果表明, 这种MIP能够在更宽的三聚氰胺浓度范围(1~100 mg/L)内只表现出特异性吸附. 以灭蝇胺为对照物时, k_NIP<1但k_MIP>1, 该结果证明MIP对分子的形状有良好的识别能力. 最后, 以制备的MIP为固相萃取吸附剂, 结合高效液相色谱/紫外检测器(HPLC/UV)建立了三聚氰胺测定方法. 当牛奶(奶粉)中MEL的加标浓度分别为15, 600和4500 μg/L(μg/kg)时检测的加标回收率为92.34%~109.4%.     

Evaluation of molecularly imprinted membranes based on different acrylic copolymers

Polyacrylonitrile and its copolymers with different functional monomers (itaconic acid, acrylic acid and acrylamide) were synthesized via water-phase precipitation polymerization in order to prepare molecularly imprinted polymer (MIP) membranes with recognition properties for the flavonoid naringin (NR). Membranes were prepared by phase inversion technique using dimethylformamide (DMF) as the solvent and adding naringin as template molecule to the casting solution. For comparison, membranes without template (blank) were prepared and tested. All MIP membranes showed high specific binding capacity; among them, the membrane prepared with the copolymer containing acrylamide as functional group, showed the highest binding capacity. Blank membranes only showed non-specific binding. The bound template was totally recovered and regenerated membranes maintained their initial binding capacity after reuse.     

Fluorescent sensing of homocysteine by molecular imprinting

The feasibility of biomimetic molecular sensing of homocysteine, an independent risk factor for cardiovascular diseases, was studied. The sensing approach coupled fluorescent derivatization of dl-homocysteine by a thiol-specific fluoro-tagging agent, N-(1-pyrenyl)maleimide, with molecular recognition by a molecularly imprinted polymer (MIP) matrix. The non-covalent MIP was fabricated using the N-(1-pyrenyl)maleimide-dl-homocysteine (PM-H) adduct as template. The PM-H-MIP was found to possess outstanding analyte-specific affinity for PM-H with binding constant, K_B, of 9.28±1.6×10⁵ M⁻¹ and density of recognition sites, B_max, of 11.9±0.8 nmol/g dried MIP. Following in situ fluorescent derivatization, luminescent response of the MIP was found to correlate linearly with concentration of dl-homocysteine in the range corresponding to realistic total homocysteine concentration in blood plasma. Besides being a passive recognition matrix for the binding of the fluoro-tagged analyte, the PM-H-MIP material was found to be able to specifically enhance the rate of derivatization reaction between dl-homocysteine and N-(1-pyrenyl)maleimide. In a sense, the MIP transformed a fluoro-tagging agent, which is generally reactive towards a broad spectrum of thiol-containing species, into a dl-homocysteine-specific derivatizing agent. The mechanism of such analyte-specific enhancement of derivatization rate and its advantages to the biomimetic molecular sensing are discussed.     

Preparation and evaluation of a macroporous molecularly imprinted hybrid silica monolithic column for recognition of proteins by high performance liquid chromatography

A novel type of macroporous molecularly imprinted hybrid silica monolithic column was first developed for recognition of proteins. The macroporous silica-based monolithic skeleton was synthesized in a 4.6 mm i.d. stainless steel column by a mild sol–gel process with methyltrimethoxysilane (MTMS) as a sole precursor, and then vinyl groups were introduced onto the surface of the silica skeleton by chemical modification of γ-methacryloxypropyltrimethoxysilane (γ-MAPS). Subsequently, the molecularly imprinted polymer (MIP) coating was copolymerized and anchored onto the surface of the silica monolith. Bovine serum albumin (BSA) and lysozyme (Lyz), which differ greatly in molecular size, isoelectric point, and charge, were representatively selected for imprinted templates to evaluate recognition property of the hybrid silica-based MIP monolith. Some important factors, such as template–monomer molar ratio, total monomer concentration and crosslinking density, were systematically investigated. Under the optimum conditions, the obtained hybrid silica-based MIP monolith showed higher binding affinity for template than its corresponding non-imprinted (NIP) monolith. The imprinted factor (IF) for BSA and Lyz reached 9.07 and 6.52, respectively. Moreover, the hybrid silica-based MIP monolith displayed favorable binding characteristics for template over competitive protein. Compared with the imprinted silica beads for stationary phase and in situ organic polymer-based hydrogel MIP monolith, the hybrid silica MIP monolith exhibited higher recognition, stability and lifetime.     

Optical interrogation of molecularly imprinted polymers and development of MIP sensors: a review

This article reviews the progress and developments achieved in the past five years (2000–2005) in the application of optical analytical techniques to the evaluation of molecularly imprinted polymer (MIP) characteristics. The MIP binding efficiency, recognition processes and selectivity have been intensively studied by optical means due to the general high sensitivity and simplicity of the utilisation of optical techniques. In addition, recent progress in the covalent linkage of MIPs to optical transducers has allowed for the realisation of highly efficient and robust optical MIP-based molecular recognition sensors. The review provides insight into the various approaches to the optical interrogation of MIPs, and is organised according to the type of optical technique employed (fluorescence, UV/Vis and infrared spectroscopy, surface plasmon resonance, chemiluminescence, refractive interference spectroscopy and Raman scattering) and the detailed strategies applied. The review also covers the recent progress achieved in the area of optical sensors based on MIPs.     

Selectivity features of molecularly imprinted polymers recognising the carbamate group

The molecular recognition properties of molecular imprinted polymers which bind the carbamate function were studied. Functional monomers potentially able to form non-covalent interactions with the model molecule N,O-dibenzylcarbamate were selected on the basis of a computational approach describing possible interactions between the template and a small library of vinylic monomers. These results were in accordance with N,O-dibenzylcarbamate batch-rebinding measurements performed on several miniMIPs prepared with the same library. From these preliminary results, four polymers were prepared by thermoinduced radical polymerization, using ethylene dimethacrylate as a cross-linker, chloroform (MIP1, MIP3) or acetonitrile (MIP2, MIP4) as porogens and methacrylic acid (MIP1, MIP2) or acrylamide (MIP3, MIP4) as functional monomers. Molecular recognition features of these materials were studied by high-performance liquid chromatography. In this manner selectivity was evaluated by considering the column retention of a library of sixteen structural analogues of dibenzylcarbamate, characterized by the transformation of the carbamate into a related function, or by the alteration of the molecular structure.The experimental results show that methacrylic acid is more efficient than acrylamide as a functional monomer (imprinting factors: MIP1 = 24.1, MIP2 = 25.6, MIP3 = 13.3, MIP4 = 2.44), and that chloroform enhances polymer selectivity. As regards structural motifs which conditionate the selectivity, the carbamate function strictly controls the presence/absence of molecular recognition, while shape and dimension of the substituents modulate the recognition itself. In particular, a marked recognition for analogs which were slightly bigger than the template was observed (N-benzyl-O-phenethylcarbamate: MIP1 α = 1.13, MIP2 α = 1.41, MIP3 α = 0.97; N-phenethyl-N-benzylcarbamate: MIP1 α = 1.61, MIP2 α = 1.17, MIP3 α = 0.81; N,O-diphenethylcarbamate: MIP1 α = 0.89, MIP2 α = 1.20, MIP3 α = 0.55).