金属卟啉分子印迹聚合物的合成与性能研究

以5-(4-羟基苯基)-10,15,20-三苯基卟啉锌为印迹分子,4-乙烯基吡啶为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了具有金属卟啉识别能力的分子印迹聚合物.紫外可见滴定光谱研究表明,功能单体与印迹分子在聚合前形成1:1的配合物.通过吸附试验、荧光光谱及斯卡查特分析法,考察了分子印迹聚合物对锌卟啉化合物的识别性能.结果表明,印迹聚合物对结构类似的卟啉化合物具有良好的识别能力,对印迹分子荧光性能的影响远大于其对应的非印迹聚合物.在浓度较低时,印迹聚合物对印迹分子的结合常数和最大结合量分别为:1.61×106L/mol和3.22×10-5mol/g.     

识别三唑类农药的片段印迹聚合物的合成及在固相萃取中的应用

采用片段印迹技术, 合成了一系列对7种三唑类农药(三唑酮、烯唑醇、多效唑、烯效唑、戊唑醇、三唑醇和双苯三唑醇)具有识别能力的聚合物. 振荡平衡吸附实验表明, 以邻硝基苯酚为模板的聚合物(M1)对上述7种农药具有最佳的选择性吸附性能. 根据分析物结构对片段印迹聚合物吸附能力的影响, 提出了片段印迹聚合物的识别机理: 三唑类化合物的分子片段末端苯环进入片段印迹聚合物的孔穴中, 同时其羟基与聚合物孔穴外的功能单体4-乙烯基吡啶上的氮原子形成氢键, 二者的协同作用实现对目标分子的选择性识别, 其中分析物末端苯环和聚合物孔穴的匹配是影响片段聚合物识别能力的主要因素. 将基质固相分散(MSPD)与以M1为吸附剂的分子印迹固相萃取(MISPE)联用, 用于土壤样品的前处理. 在3种添加水平下, 各分析物的回收率均为75%~102%, 相对标准偏差为3%~9%(n=5), 方法检出限(信噪比等于3)0.9~15 μg/kg. 表明该分析方法结合了MSPD的快速提取和MISPE的高选择性的特点.     

氨基三唑分子印迹聚合物的制备及性能表征

采用分子印迹技术,以氨基三唑(AMI)为模板分子,异丁醇为溶剂,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酯(EDMA)为交联剂,合成了氨基三唑分子印迹聚合物(AMI-MIP)。采用静态平衡结合实验和选择性实验评价了AMI-MIP对底物分子的结合特性及分子识别性能,并进行了吸附动力学研究。结果表明,AMI-MIP对AMI存在不同亲和力的两类结合位点,且对AMI具有很高的选择吸附特性和良好的分子识别性能,AMI-MIP对AMI的吸附行为可用准二级吸附动力学方程加以描述。     

虚拟模板/硅胶表面分子印迹材料的制备及其在海水溶液中的吸附行为研究

以萘乙酸为虚拟模板,以甲基丙烯酸为功能单体、二甲基丙烯酸乙二醇酯为交联剂,用表面聚合-牺牲硅胶法合成了孔状结构的萘分子印迹聚合物.采用红外光谱、扫描电镜和N2吸附实验对印迹聚合物进行了表征;运用理论化学计算探讨了功能单体的筛选方法;利用平衡吸附法考察了印迹材料对海水中萘、蒽、菲化合物选择识别特性.实验表明: 以α-萘乙酸分子为模板的分子印迹聚合物对萘具有较好的识别能力.另外,由于α-萘乙酸分子中羧基的存在,使得分子印迹聚合物(MIP)的印迹空穴又与菲的体积大小相匹配,所以也表现出对菲的独特吸附能力.制备的印迹材料可望用于海水中2～3环多环芳烃的选择性吸附与富集.     

模拟受体聚合物的合成及吸附行为研究

采用紫外光引发聚合的分子印迹技术,分别制备阿替洛尔、美托洛尔、尼莫地平、酮糠唑4种模板化合物的分子印迹聚合物(molecularlyimprinted polymers,MIP).利用紫外平衡吸附法研究了聚合物的吸附性能和选择识别能力.结果表明,阿替洛尔、美托洛尔印迹聚合物对各自的模板分子呈现良好的再识别性能,而尼莫地平、酮糠唑印迹聚合物对原模板则几乎没有识别能力.Scatchard分析显示了功能单体甲基丙烯酸(MAA)与模板分子阿替洛尔、美托洛尔在自组装过程中通过氢键和离子键形成了至少两类不等价的结合位点.对底物交叉结合实验也表明阿替洛尔、美托洛尔这两种印迹聚合物具有良好的选择性,分离因子α值分别达到了1.75和1.62,而空白聚合物则分别仅为1.07和0.97.     

噻吩分子印迹聚合物的合成及其识别性能研究

采用分子印迹技术合成了噻吩分子印迹聚合物。研究了聚合物的吸附性能和识别性能,并考察了影响聚合物吸附性能的因素(如:功能单体、交联剂、溶剂以及模板分子与功能单体的摩尔比等)。结果表明:以噻吩为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,氯仿为溶剂,反应温度60℃,在偶氮二异丁腈引发下合成的噻吩分子印迹聚合物对噻吩具有较好的吸附性能和识别特性,可为石油产品进行深度脱硫提供理论依据。     

磺胺异(口恶)唑印迹聚合物的制备与选择结合性能的研究

以磺胺异噁唑为模板分子,二甲基丙烯酸乙二醇酯为交联剂,分别用甲基丙烯酸和4-乙烯基吡啶为功能单体,采用牺牲硅胶法合成了磺胺异噁唑分子印迹聚合物;通过静态平衡结合法和Scatchard分析法,系统研究了不同单体对聚合物识别性能和选择性的影响;对比磺胺异噁唑和磺胺二甲嘧啶的结合特性,以4-乙烯基吡啶为功能单体的印迹聚合物具有较好的选择性;Scatchard分析表明,该印迹聚合物在印迹过程中形成了两类不同的结合位点,计算了离解常数分别为2.01×10-4和7.30×10-3mol/L.     

以锌原卟啉为功能单体的分子印迹聚合物对胞嘧啶的识别作用

以锌原卟啉(ZnPP)为功能单体,甲基丙烯酸为共功能单体合成了生物碱基———胞嘧啶的分子印迹聚合物.通过静态吸附紫外检测的方法,对印迹和非印迹聚合物与胞嘧啶及腺嘌呤、尿嘧啶、胸腺嘧啶的结合特性分别进行了对比,分子印迹聚合物(MIP)与非分子印迹聚合物(NMIP)对胞嘧啶的吸附率差值为20.8%,远远高于其他三种碱基,说明MIP对胞嘧啶具有分子识别能力,实现了对胞嘧啶的分子识别.     

TNT分子印迹聚合物微球的合成与性能研究

以三硝基甲苯(TNT)为模板分子,EDMA为交联剂,采用沉淀聚合法制备了TNT分子印迹微球.讨论了溶剂用量、模板分子用量、功能单体种类等对分子印迹微球的形貌及吸附性能的影响;利用紫外吸收光谱和BET表征了印迹聚合物微球的结合位点相互作用与印迹孔穴结构;通过平衡吸附和选择性吸附实验,研究了印迹聚合物微球的吸附性能和选择性识别性能.结果表明,以丙烯酰胺为功能单体制备的分子印迹聚合物为规则的球形,内部含有分子印迹孔穴,微球的粒径为1～2μm.印迹聚合物微球可在30 min内达到吸附平衡,在1 mmol/L的TNT乙醇溶液中,印迹聚合物微球的平衡吸附量为32.5 mmol/kg,对TNT分离系数为25.19,具有较好的特异性吸附能力,并可选择性识别TNT分子.     

环丙沙星分子印迹聚合物的合成及识别性能研究

采用分子印迹技术合成了以环丙沙星为印迹分子,以甲基丙烯酸和4-乙烯基吡啶同时为功能单体的分子印迹聚合物。运用平衡结合实验研究了印迹聚合物的吸附特性和选择识别能力。Scatchard分析表明,在所研究的浓度范围内,分子印迹聚合物中形成了两类不同的结合位点。底物选择实验表明,这种聚合物对环丙沙星呈现高的选择结合能力。     

Preparation and Adsorption Characteristics of Cordycepin Molecularly Imprinted Polymers

The separation of a molecularly imprinted polymer for cordycepin was investigated. The synthesis employed cordycepin as the molecular template, alpha-methylacrylic acid as the functional monomer, glycol dimethyl acrylate as the cross-linking agent, azobisisobutyronitrile as the initiator, and tetrahydrofuran as the solvent and pore-foaming agent. The interaction between cordycepin and the functional monomer was investigated by ultraviolet-visible and infrared spectroscopy. The properties of the molecularly imprinted polymer were analyzed by scanning electron microscopy, equilibrium adsorption experiments, and the Scatchard equation. Static adsorption, solid phase extraction, and high-performance liquid chromatography experiments were employed to evaluate the adsorption properties and selective recognition characteristics. The results showed that the molecularly imprinted polymer had specific adsorption with cordycepin, and the maximum absorption capacity was 1920 µg/g. Scatchard analysis suggested that high affinity and low affinity binding sites were present. For the high affinity case, the dissociation constant and apparent maximum numbers of the binding sites were 0.0089 mmol/L and 4.78 µmol/g, respectively. The dissociation constant and apparent numbers of binding sites were 0.035 mmol/L and 6.047 µmol/g for the low affinity sites. Compared with the corresponding nonimprinted polymer, the cordycepin molecularly imprinted polymer exhibited higher adsorption and selectivity for cordycepin than structural analogs.     

Nonaqueous emulsion polymerization: A practical synthetic route for the production of molecularly imprinted nanospheres

Monodisperse, molecularly imprinted nanospheres were synthesized by nonaqueous (mini)emulsion polymerization using a standard monomer mixture of methacrylic acid and ethylene dimethacrylate containing the drug propranolol as a template. The preparation conditions (solvent, amount of surfactant, and amount of employed template) were extensively varied in order to assess their effect on the properties of the resulting polymer nanoparticles. The molecular recognition capability of the nanospheres was evaluated in batch rebinding experiments, and the effect of the nanosphere preparation conditions as well as of the reaction conditions was investigated. In this way, optimal preparation protocols for molecularly imprinted nanoparticles under nonaqueous conditions with the use of a nonionic emulsifier were identified, which lead to nanospheres with a diameter of around 100 nm having an enhanced capacity of specific template rebinding compared to both nonimprinted nanospheres and to particles obtained by emulsion polymerization in water. Best results were obtained with nanospheres prepared in N,N‐dimethylformamide/n‐hexane with a high functional monomer to template ratio. The enantioselectivity of the rebinding process was also demonstrated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

伊诺沙星分子印迹聚合物的制备及分子识别性能研究

以伊诺沙星为印迹分子、甲基丙烯酸为功能单体、季戊四醇三丙烯酸酯为交联剂,合成了对伊诺沙星有较好选择性的印迹聚合物。利用铽敏化荧光,通过静态平衡结合法和Scatchard分析法研究了此印迹聚合物的结合能力和选择性,结果表明印迹聚合物对伊诺沙星有较高的亲和性和选择性。     

Preparation, characterization and properties studies of quinine-imprinted polymer in the aqueous phase

The uniform-sized spherical molecularly imprinted polymers were successfully prepared through molecular imprinting technology by two-step seed swelling and mini-emulsion polymerization in the aqueous condition using quinine as template molecules and methacrylic acid (MAA) as functional monomer. The polymers were characterized by IR spectra, thermal-weight analysis, scanning electron microscope and laser particle size analysis. The properties of imprinted polymers were investigated in different organic phases and aqueous media. In the organic media, results suggested that polar interactions (hydrogen bonding, ionic interactions) between acidic monomer/polymer and template molecules are mainly responsible for the binding and recognition; whereas in the aqueous medium, a considerable recognition effect was also obtained where the ionic (electrostatic) interaction and hydrophobic interaction play an important role. The experiments of binding different substrates indicated that the MIPs possessed an excellent rebinding ability and inherent selectivity to quinine. __________ Translated from Zhongshan Dcocue Xuebao/Acta Scientianum Natralium University Sunyatseni, 2005, 44(3)(in Chinese)     

Adsorption of carbaryl using molecularly imprinted microspheres prepared by precipitation polymerization

To obtain the desired specific adsorbents for carbaryl to enrichment, separation, and analysis of trace pesticide residues in environmental water, molecularly imprinted polymer (MIP) microspheres were prepared by precipitation polymerization using carbaryl, methacrylic acid (MAA), ethylene glycol dimethacrylate (EGDMA), azobisisobutyronitrile (AIBN), and acetonitrile as template, functional monomer, cross‐linker, initiator, and porogen, respectively. Molecular modeling software was used to compute rational interaction between the template molecule and function monomer. The adsorption properties of carbaryl in acetonitrile for imprinted microspheres were evaluated by equilibrium rebinding experiments. Scatchard plot analysis revealed that there was one class of binding sites populated in the imprinted polymer microspheres with dissociation constants of 3.3 × 10^?2 mol/l and an apparent maximum number of 1.95 µmol/g. The specificity of the imprinted microspheres was investigated by binding analysis using carbaryl and structurally related carbamate pesticides. The results indicated that the obtained imprinted microspheres showed a good selectivity for carbaryl. Copyright © 2007 John Wiley & Sons, Ltd.     

表面接枝分子印迹聚合物微球的合成及评价

将聚苯乙烯-二乙烯苯微球表面功能基化, 引入引发转移终止剂(initiator-transfer-terminator agent, iniferter), 以活性自由基聚合方式研究了球形树脂表面合成印迹聚合物的方法. 在紫外光引发下, 以左旋麻黄碱为印迹分子, 甲基丙烯酸为功能单体, 在接枝Iniferter后的微球表面进行分子印迹聚合物接枝实验, 并使用不同的反应条件, 探讨了表面接枝印迹层微球制备条件对于识别能力的影响. 平衡吸附的结果表明, 表面接枝聚苯乙烯-二乙烯苯微球对于印迹分子具有亲和能力及选择性, 其识别能力来自于印迹得到的识别位点.     

硅胶表面扑灭津分子印迹材料的制备及性能表征

以扑灭津为模板分子,在甲苯溶液中经三步反应合成了基于硅胶表面修饰的分子印迹聚合物,并探讨了聚合物制备工艺,验证了聚合物的结构。红外1726cm-1指认印迹膜中的羰基特征峰,元素分析表明印迹材料含碳量18%,N2吸附实验表征印迹膜厚度为0.3nm。应用高效液相色谱-质谱考察了扑灭津和其它3种三嗪农药水溶液中的竞争吸附特性。研究表明:本法制备的表面印迹材料对4种三嗪类农药的吸附均优于参比材料。     

沉淀聚合制备诺氟沙星-Zn2+分子印迹聚合物及其印迹方式的研究

采用沉淀聚合的方式以诺氟沙星(NFA)-Zn2+为模板分子,乙二醇二甲基丙烯酸酯为交联剂,分别选取酸性功能单体甲基丙烯酸与碱性功能单体4-乙烯基吡啶制备了诺氟沙星-Zn2+的分子印迹聚合物.通过紫外光谱研究发现诺氟沙星与Zn2+及两种功能单体均发生了金属配位印迹作用且形成了比例不同的印迹复合物.红外光谱的功能基团的表征结果显示,甲基丙烯酸与诺氟沙星-Zn2+形成了以诱导作用占优的三元配合物,而4-乙烯基吡啶则与诺氟沙星-Zn2+形成了共轭作用占优的三元配合物.扫描电镜及粒径分布实验表征了聚合物的物理特性,结果显示印迹聚合物的表面存在孔及孔道结构而非印迹聚合物的表面较致密不存在孔且制备的印迹聚合物的粒径均在100μm以下,其平均粒径为39μm.等温结合及选择性实验的结果表明4-乙烯基吡啶为功能单体制备的印迹聚合物的选择性识别性能优于甲基丙烯酸为功能单体制备的印迹聚合物,其特异性吸附容量和印迹指数分别为66.84μmol/g和4.207.同时在混合溶液的选择性实验中以4-乙烯基吡啶(4-VP)为功能单体制备的印迹聚合物的选择识别诺氟沙星的能力优于以甲基丙烯酸为功能单体的聚合物,其识别因子分别为3.408和2.909,而非印迹聚合物对底物的吸附量较小且识别因子均接近于1,说明非印迹聚合物对底物的识别为非选择性的.