酚酞分子印迹聚合物的制备及特异吸附性能

以泻药酚酞为模板分子,4-乙烯基吡啶为功能单体制备了模板分子和功能单体不同比例的一系列酚酞分子印迹聚合物。利用扫描电镜对聚合物进行了表面形态分析,采用静态平衡实验法研究了聚合物对模板分子及其类似物的吸附行为和选择性识别能力。实验结果表明,所制备的分子印迹聚合物,吸附 3 h 后基本接近最大吸附量,其中模板分子、4-乙烯基吡啶和交联剂的摩尔比为 1∶6∶20的MIP2的印迹因子为 2.30,效果最佳。Scatchard 分析表明, 在所研究的浓度范围内,吸附过程存在两类结合位点,一类高亲和力结合位点的离解常数为Kd1= 0.63 mmol/L,最大表观结合量 Qmax1 = 25.4 umol/g,另一类低亲和力结合位点的离解常数为 Kd2 =3.5 mmol/L,最大表观结合量 Qmax2 = 61.9 umol/g,通过与酚酞类似物质在酚酞分子印迹聚合物上的吸附行为比较,表明对酚酞具有很好的选择性吸附。     

Adsorption of carbaryl using molecularly imprinted microspheres prepared by precipitation polymerization

To obtain the desired specific adsorbents for carbaryl to enrichment, separation, and analysis of trace pesticide residues in environmental water, molecularly imprinted polymer (MIP) microspheres were prepared by precipitation polymerization using carbaryl, methacrylic acid (MAA), ethylene glycol dimethacrylate (EGDMA), azobisisobutyronitrile (AIBN), and acetonitrile as template, functional monomer, cross‐linker, initiator, and porogen, respectively. Molecular modeling software was used to compute rational interaction between the template molecule and function monomer. The adsorption properties of carbaryl in acetonitrile for imprinted microspheres were evaluated by equilibrium rebinding experiments. Scatchard plot analysis revealed that there was one class of binding sites populated in the imprinted polymer microspheres with dissociation constants of 3.3 × 10^?2 mol/l and an apparent maximum number of 1.95 µmol/g. The specificity of the imprinted microspheres was investigated by binding analysis using carbaryl and structurally related carbamate pesticides. The results indicated that the obtained imprinted microspheres showed a good selectivity for carbaryl. Copyright © 2007 John Wiley & Sons, Ltd.     

A NOVEL MOLECULARLY IMPRINTED POLYMER： SYNTHESIS AND ADSORPTION BEHAVIOR OF GATIFLOXACIN

A kind of molecularly imprinted polymer （MIPs） with high selectivity was prepared using methacrylic acid （MAA） as functional monomer, ethylene glycol dimethacrylate （EDMA） as crosslinker and Gatifloxacin as template. The effect of various parameters such as volume of solvent, functional monomer dosage, crosslinker dosage and polymerization time were investigated. The selective binding experiment for substrates show that the affinity and selectivity for Gatifloxacin were higher than that for blank polymer. Scatchard analysis show that the MIPs recognized template with two kinds of binding sites. The dissociation constant Kd and maximum adsorption quantity Qmax of these two kinds of binding sites were calculated： Kd1 and Qmax1 of the binding sites with high affinity were 8.67×10^-4 mol/L and 28.19μmol/g, while Kd2 and Qmax2 of the binding sites with low affinity were 1.05×10^-3 mol/L and 33.20μmol/g respectively.     

环丙沙星分子印迹聚合物的合成及识别性能研究

采用分子印迹技术合成了以环丙沙星为印迹分子,以甲基丙烯酸和4-乙烯基吡啶同时为功能单体的分子印迹聚合物。运用平衡结合实验研究了印迹聚合物的吸附特性和选择识别能力。Scatchard分析表明,在所研究的浓度范围内,分子印迹聚合物中形成了两类不同的结合位点。底物选择实验表明,这种聚合物对环丙沙星呈现高的选择结合能力。     

Preparation and performance valuation of high selective molecularly imprinted polymers for malachite green

Molecular imprinting is a technology that facilitates the production of artificial receptors toward compounds of interest. In this study, we prepared a series of molecularly imprinted polymers (MIPs) by precipitation polymerization for the purpose of binding specifically to malachite green (MG). The presence of monomer–template solution complexes in non-covalent MIPs systems had been verified by UV-spectrometric detection and molecular dynamics simulations. The synthesized parameters were, respectively, optimized and the optimal conditions for the efficient adsorption property were as follows: template: MG, 1 mmol; functional monomer: methacrylic acid (MAA), 8 mmol; cross-linker: ethylene glycol dimethacryllate, 16 mmol; and porogen: acetonitrile, 30 mL. Fourier transform infrared spectroscopy and nitrogen adsorption experiments were used to characterize the MIPs. Scatchard analysis was used for estimation of the dissociation constants and maximum amounts of binding sites. The polymer based on MAA had two classes of heterogeneous binding sites characterized by two values of K _D and B _max: K _D = 14.10 μmol L^?1 and B _max = 1.37 μmol g^?1 for the higher affinity binding sites, and K _D = 384.62 μmol L^?1 and B _max = 24.77 μmol g^?1 for the lower affinity binding sites. The specificity of MIPs on SPE column was evaluated by rebinding the other structurally similar compounds. The results indicated that the imprinted polymers exhibited an excellent stereo-selectivity toward MG.     

金属卟啉分子印迹聚合物的合成与性能研究

以5-(4-羟基苯基)-10,15,20-三苯基卟啉锌为印迹分子,4-乙烯基吡啶为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了具有金属卟啉识别能力的分子印迹聚合物.紫外可见滴定光谱研究表明,功能单体与印迹分子在聚合前形成1:1的配合物.通过吸附试验、荧光光谱及斯卡查特分析法,考察了分子印迹聚合物对锌卟啉化合物的识别性能.结果表明,印迹聚合物对结构类似的卟啉化合物具有良好的识别能力,对印迹分子荧光性能的影响远大于其对应的非印迹聚合物.在浓度较低时,印迹聚合物对印迹分子的结合常数和最大结合量分别为:1.61×106L/mol和3.22×10-5mol/g.     

农药久效磷分子印迹聚合物合成及其亲合性评估

有机磷农药药效高、易于被水、酶和微生物所降解，残留毒性小，但由于不合理利用等因素，粮食、蔬菜、水果和环境中的有机磷农药残留严重超标，其危害引起了各国政府、学术界、民众的高度重视．目前有色谱法、酶法和免疫法等，这些方法的应用都受到客观因素的限制．因此研制类似于酶和抗体的高选择性、低造价、稳定性好的吸附材料用于食品和环境中有机磷农药残留的富集、分离纯化和分析尤为重要．     

尼卡地平分子聚合物的制备及识别性能研究

采用分子印迹技术合成了以尼卡地平为模板分子,甲基丙烯酸为功能单体的分子印迹聚合物(MIP).运用平衡结合实验研究了聚合物的吸附特性和选择识别能力.通过Scatchard方程分析,结合位点的离解常数Kd=1.03 mmol·L-1,最大表观结合常数Qmax=18.76 μmol·g-1.结果表明,分子印迹聚合物对尼卡地平呈现出较高的吸附性和选择识别性,对尼卡地平药物的分离富集和检测具有实际临床意义.     

Design of an imprinted clean-up method for mycophenolic acid in maize

In the present work, the development of imprinted polymers selective towards mycophenolic acid and their application in food analysis are reported for the first time. To synthesize the molecularly imprinted polymer (MIP) 4-vinylpyridine and ethyleneglycol dimethacrylate were applied as functional monomer and cross-linker, respectively. Besides the toxin itself, the implementation of structural analogues as templates was evaluated. A molecularly imprinted solid-phase extraction (MISPE) procedure was designed for the selective clean-up of maize extracts. Binding experiments and Scatchard analysis indicated the presence of specific binding sites in the imprinted polymers. The imprinting effect varied along with the selected template. The dissociation constant (K(D)) of the higher affinity binding sites ranged from 0.8 μmol/l to 15.6 μmol/l, while the K(D) of the lower affinity binding sites was in the range of 138.5-519.3 μmol/l. The performance of the MIPs throughout the clean-up of spiked maize sample extracts was evaluated and compared with the results obtained when applying a non-imprinted polymer. Depending on the polymers and the spiked concentration, recoveries after MISPE and non-imprinted solid-phase extraction varied respectively from 49% to 84% and from 28% to 31%. The imprinted polymers were superior regarding matrix effect, limit of detection (LOD) and limit of quantification (LOQ). LOD ranged from 0.17 μg/kg to 0.25 μg/kg and LOQ varied from 0.57 μg/kg to 0.82 μg/kg. Analysis of 15 maize samples by liquid chromatography tandem mass spectrometry revealed that the MIPs could be excellent sorbents for clean-up of contaminated food samples.     

Synthesis of Molecularly Imprinted Polymer for Sensitive Penicillin Determination in Milk

Abstract

Penicillin G (PG) in milk is unsafe for human and is a big problem for the foods industry. Hence, the better analytical and eliminative techniques are demanded. We investigated a PG molecular imprinted polymer (MIP), which can sensitively detect and extract the PG from milk and other samples. The MIP synthesis involved a β-lactam antibiotics PG, methacrylic acid (MAA) and dimethyl formamide (DMF). Its properties were analyzed with Scatchard plot, which showed that there were two affinity sites of the PG polymer. The first equilibrium dissociation constant of the high-affinity binding sites Kd₁ was 1.14 × 10^?4 mol/L and the binding capacity Q_max1 was 46.01 µmol/g; the second equilibrium dissociation constant of the low-affinity binding sites Kd₂ was 1.35 × 10^?3 mol/L and the binding capacity Q_max2 was 72.55 µmol/g. Furthermore, two PG determination methods using the polymer were developed. The first was carried out quantitatively with a spectrophotometer and the detection limit was 1 ppm. The other one was the combination of the MIP particles with milk fermentation for PG analysis and the sensitivity was 10 ppb.     

二茂铁甲酸分子印迹聚合物的制备和识别机理、结合特性

以二茂铁甲酸（FCA）为模板,选用不同的功能单体制备了一系列分子印迹聚合物,用平衡结合实验考察了它们对模板分子的结合性能。 结果表明,以甲基丙烯酸为功能单体制得的印迹聚合物P1对模板分子有很好的选择性,特异性吸附量ΔCP为23.18 μmol/g,印迹因子IF为2.33,竞争性结合实验结果表明,P1可以将模板分子从结构类似物中分离出来。 Scatchard方程研究表明,在研究的浓度范围内聚合物中形成了一类等价的结合位点,其对模板分子的平衡离解常数K=1.94 mmol/L,最大表观结合量Cpmax=92.33 μmol/g。 研究还表明,FCA的羧基是在聚合物的孔穴中产生识别位点的功能基,模板分子上的羧基与MAA的羧基形成双重氢键作用是分子识别的主要作用力。     

沉淀聚合法制备三聚氰胺分子印迹聚合物微球

以三聚氰胺为模板分子,以甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在乙腈-乙二醇(20∶1,V/V)混合溶剂中沉淀聚合制备了分子印迹聚合物微球.利用1H-NMR和紫外光谱方法研究了模板与功能单体相互作用情况.结果表明,三聚氰胺与甲基丙烯酸(MAA)分子通过协同氢键作用形成1∶2型氢键配合物.利用扫描电镜和红外光谱对聚合物微球的结构进行了表征.结果表明,印迹聚合物近似圆球形,粒径约为400～500 nm,且大于非印迹聚合物微球,表面存在大量的结合位点.通过静态平衡吸附实验研究了聚合物微球对模板分子的结合能力,印迹聚合物微球在4 h后逐渐达到吸附平衡,Scatchard分析表明,印迹聚合物微球主要存在两类不同的结合位点,最大表观结合量(Qmax)和平衡离解常数(Kd)分别为Qmax1=22.97μmol/g,Kd1=0.14×10-3 mol/L;Qmax2=157.65μmol/g,Kd2=2.55×10-3 mol/L,计算得出表观印迹效率和有效印迹效率分别为68%和58%.此方法合成的印迹聚合物微球对三聚氰胺有较好的结合性能,可应用于三聚氰胺的分离检测.     

4-氨基吡啶分子模板聚合物选择性识别及结合性质的研究

以4-氨基吡啶为模板分子制备了对4-氨基吡啶具有特异选择性的模板聚合物.制得的棒状聚合物经研磨、过筛后,采用平衡结合方法评价了该模板聚合物的结合特性.Scatchard分析表明,在所研究的浓度范围内,聚合物中形成了两类不同的结合位点,这两类结合位点的离解常数采用多点结合模型计算得到的值分别为6.0μmol/L和1.2mmol/L.底物选择性表明,与其它结构相似的分子相比,该聚合物对模板分子4-氨基吡啶显示了很强的结合能力.₁HNMR研究及4-氨基吡啶共振结构分析表明,模板分子与聚合物中的结合位点之间的作用为离子作用.     

A Molecularly Imprinted Nicotine-Selective Polymer

Abstract

A (-)-nicotine-selective polymer was prepared by molecular imprinting technique using methacrylic acid as a functional monomer. Liquid-chromatographic tests, using the polymers as a stationary phase, exhibited that the basicity of the functional group of (-)-nicotine is crucial for rebinding by the molecularly imprinted polymer. Scatchard analysis implied that the binding sites generated within the polymer are heterogeneous in terms of affinity, and the apparent dissociation constant of the highest affinity binding sites was estimated as 3.7 μM.     

Binding Studies on Substrate- and Enantio-Selective Molecularly Imprinted Polymers

Abstract

A molecularly imprinted polymer was prepared using tert-butyloxycarbonyl-L-phenylalanine as the print molecule and methacrylic acid as the functional monomer. The bulk polymer obtained was ground, sieved, packed into a column and investigated in the HPLC-mode by frontal chromatography to determine the number of binding sites and dissociation constants for the enantiomers interacting with the polymer. The dissociation constant for the L-enantiomer of the print molecule was lower than for the D-enantiomer (6.3 mM and 8.1 mM, respectively). This means that the affinity for the L-enantiomer was higher than for the D-enantiomer. The number of binding sites in the polymer giving rise to these dissociation constants were determined to be 28 μmol per g dry polymer.     

Preparing molecularly imprinted membranes by phase inversion to separate kaempferol

Molecularly imprinted membranes (MIMs) were studied to separate special target molecule – kaempferol, an important active pharmaceutical ingredient. The kaempferol MIM were prepared by the liquid–solid phase inversion method. The effects of polyphenylene sulfone, LiCl, and ZnCl₂ on membrane performance were studied, a high Flux MIM was prepared, then the kaempferol molecularly imprinted polymer membrane, non‐molecularly imprinted membrane, and non‐molecularly imprinted polymer membrane were prepared to investigate adsorption capacity. From adsorption isotherm curve, the maximum equilibrium adsorption quantity was 890 µg/g, and it was MIM. The MIM and molecularly imprinted polymer membrane give high selectivity towards kaempferol; the non‐molecularly imprinted membrane and non‐molecularly imprinted polymer membrane showed low adsorption quantity and selectivity. The reuse experiment of the MIM indicated that it has good reuse property. All the results showed binding sites were important in the separation process of MIMs. Copyright © 2016 John Wiley & Sons, Ltd.     

A molecularly imprinted polymer receptor for the enantiomeric recognition of amino acid hydantoins mimicking cooperative hydrogen bonds between nucleotide bases

Using acrylamide as hydrogen bonding functional monomer and (5R)-5-benzylhydantoin as template, a molecularly imprinted polymer was prepared in a polar solvent, which exhibited good enantiomeric recognition properties. The binding characteristics and selectivity of the polymer were evaluated by batch methods. Scatchard analysis showed that two classes of binding sites were produced in the polymer matrix and their dissociation constants were calculated to be 3.5 × 10-5mol/L and 4.3 ×10-4 mol/L, respectively, by utilizing the model of multiple independent classes of binding sites. These results were more reasonable than those obtained by Scatchard analysis , which was in agreement with the prediction of the binding characteristics of the polymer by exploring the effect of acrylamide on UV spectra of (5R)-5-benzylhydantoin. The substrate- and enantio-selectivity of the polymer was investigated. Finally, the study of effect of water on the chiral separation factor of the polymer further proved that the hy     

Synthesis of Acrylamide Molecularly Imprinted Polymers Immobilized on Graphite Oxide through Surface-Initiated Atom Transfer Radical Polymerization

A novel acrylamide (AA) molecularly imprinted polymer was synthesized by atom transfer radical polymerization (ATRP) on graphite oxide (GO) particles. Propionamide (PAM) was used as a dummy template molecule, hydroxy ethyl acrylate (HEA) as a functional monomer, ethylene glycol dimethacrylate (EDMA) as a crosslinking agent, and acetonitrile as both solvent and dispersion medium. Scanning electron microscopy (SEM) images and infrared spectroscopy (IR) confirmed that the molecularly imprinted polymers (MIP) were successfully grafted onto the surface of the GO particles. The corresponding adsorption kinetic curves and adsorption isotherms showed that the AA adsorption reached equilibrium after 5 h, with large amounts of AA being adsorped in the first 100 min. The maximum AA adsorption capacity was 123.48 µmol g^?1 according to Scatchard analysis, which indicated that the MIP possesses good AA adsorption capacity. This MIP-GO material was used to selectively determine AA in fried food samples.     

石杉碱甲分子印迹聚合物的制备、表征及其吸附性能

以硅胶为牺牲载体,石杉碱甲为模板分子,甲基丙烯酸为功能单体,二乙烯基苯为交联剂,偶氮二异丁腈为引发剂,首次制备了石杉碱甲分子印迹聚合物,并用红外光谱、扫描电子显微镜和热重分析研究了印迹聚合物的结构特征,用静态吸附法和Scatchard分析法研究了印迹聚合物的识别效能和表面位点分布特征。 结果表明,石杉碱甲印迹聚合物对模板分子具有较好的选择吸附性能,选择系数为1.399。Scatchard分析表明,印迹聚合物基体中主要存有两类吸附位点,对高亲和位点：平衡离解常数Kd1=0.776 g/L,最大表观结合量Qmax1=0.213 mg/g;对低亲和位点：平衡离解常数Kd2=0.169 g/L,最大表观结合量Qmax2=0.832 mg/g。 当该聚合物用于微固相萃取蛇足石杉粗提液中的石杉碱甲时,石杉碱甲回收率为93.5%,显示了较好的富集效果。     

Non-covalently lactose imprinted polymers and recognition of saccharides in aqueous solutions

The aim of this work was to prepare lactose imprinted polymer and study of its selectivity for the recognition of different mono- and disaccharides. A series of molecularly imprinted polymers (MIPs) against lactose were synthesized and their binding properties were compared with a Blank non-imprinted polymer. Methacrylamide (MAAM) and ethylene glycol dimethacrylate were used as functional monomer and cross-linker, respectively. Dimethylsulfoxide was also applied as polymerization solvent. Different lactose:MAAM ratios were applied and optimized MIP was selected in a conventional batch adsorption study. The dissociation constant and maximum binding sites of polymer were determined using the Scatchard analysis. The selectivity of MIP for different mono- and disaccharides was also evaluated. The results indicated that the shape of cavity and orientation of functional monomers in binding sites and the spatial arrangement of hydroxyl groups in saccharide structure were responsible for the selectivity of lactose imprinted polymer.