共查询到20条相似文献,搜索用时 543 毫秒
1.
2.
铜离子配位的分子印迹聚合物的分子识别特性研究 总被引:8,自引:0,他引:8
为了探讨金属配位分子印迹聚合物的识别机理,提高了分子印迹聚合物分离的选择性与亲和性,制备了金属铜离子与2,2‘-联吡啶配合物的分子印迹聚合物,并用平衡吸附法系统研究了分子印迹聚合物对铜(Ⅱ)-2,2‘-联吡啶配合物的识别。证明印迹聚合物对铜(Ⅱ)-2,2‘-联吡啶具有选择性识别能力,Scatchard分析显示在聚合物中存在两类不同的结合位点,求得结合位点的离解常数和最大结合量,并研究了识别过程的动力学。结果表明金属配位分子印迹聚合物有较高的特异性识别能力和较快的动力学结合过程。 相似文献
4.
5.
6.
7.
8.
9.
采用本体聚合法,以甲基丙烯酸(MAA)为功能单体、三羟甲基丙烷三丙烯酸酯(TMPTA)为交联剂、尼莫地平为模板分子,制备了分子印迹聚合物。运用平衡结合实验,研究了印迹聚合物对尼莫地平、尼群地平、非洛地平药物分子的选择性识别能力。3种药物的静态吸附分配系数KD值分别为0.221 4、0.197 2、0.051 4。结果表明分子印迹聚合物对尼莫地平有较高的选择性。测定了不同温度下印迹聚合物的吸附等温曲线,表明吸附等温线为Ⅰ型吸附等温线,且随着温度的升高吸附量降低,说明吸附过程是放热过程。为了进一步研究印迹聚合物的吸附机理,进行了热力学性质的研究,测定了不同温度下吸附过程的熵变、焓变和吉布斯自由能变化,实验结果表明吸附是焓控制过程。 相似文献
10.
11.
槲皮素-铜(Ⅱ)配位分子印迹聚合物的制备及其结合特性研究 总被引:2,自引:0,他引:2
以槲皮素-铜(Ⅱ)配合物(Qu-Cu)为模板分子、α-甲基丙烯酸为功能单体在强极性溶剂甲醇中合成了一种新型的配位分子印迹聚合物.紫外-可见光谱研究表明槲皮素与铜(Ⅱ)形成1:2配合物,槲皮素、铜(Ⅱ)和功能单体α-甲基丙烯酸三者发生了络合作用.利用透射电镜及平衡结合实验研究了溶剂用量对配位分子印迹聚合物形貌及其吸附性能... 相似文献
12.
13.
A phosphate-selective molecularly imprinted polymer was prepared using 1-allyl-2-thiourea as a functional monomer, and the binding ability and selectivity of the polymer were evaluated. The imprinted polymer showed high binding ability to and selectivity for phosphate in aqueous media. The recoverability of phosphate from the imprinted polymer was also examined, and nearly 70% of highly concentrated phosphate could be recovered. 相似文献
14.
烟酸分子印迹复合膜的制备及其分离性能研究 总被引:1,自引:0,他引:1
以聚偏氟乙烯微孔滤膜为支撑膜,烟酸为模板分子,用紫外光引发表面修饰聚合制备了微孔滤膜支撑-烟酸分子印迹复合膜.电镜扫描对该印迹复合膜进行了表面形态表征.Scatchard分析表明,在所研究的浓度范围内分子印迹复合膜中存在等价的结合位点,结合位点的平衡离解常数Kd为5.55×10-2mmol·L-1.底物的结合和渗透选择性实验表明,分子印迹复合膜对烟酸有较好的结合性能,结合量是6.10μmol·g-1.与其结构类似的化合物烟酰胺相比,分子印迹复合膜对模板分子展示了更好的选择性及高度的识别能力. 相似文献
15.
Zhang Y Tong A Li L 《Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy》2004,60(1-2):241-244
By reaction of 7-chloroethyl-theophylline with aminopropylsilanized silica gel we synthesized a 7-chloroethyl-theophylline-immobilized silica gel as template molecule and prepared a molecularly imprinted polymer (MIP-Si), which had special recognition sites to 7-chloroethyl-theophylline. A conventional molecularly imprinted polymer (MIP) using 7-chloroethyl-theophylline as template was also prepared for comparison. Binding abilities to 7-chloroethyl-theophylline and its structural analogs revealed that the MIP-Si shows much higher binding speed and much more binding capacity than the MIP does. 相似文献
16.
Preparation of 17β‐estradiol‐imprinted material by surface‐initiated atom transfer radical polymerization and its application 下载免费PDF全文
Yanru Gong Yuling Niu Xiaohan Gong Meihua Ma Xiaowei Ren Weihua Zhu Ruiming Luo Bolin Gong 《Journal of separation science》2015,38(7):1254-1261
A novel 17β‐estradiol molecularly imprinted polymer was grafted onto the surface of initiator‐immobilized silica by surface‐initiated atom transfer radical polymerization. The resulting molecularly imprinted polymer was characterized by elemental analysis and thermogravimetric analysis. The binding property of molecularly imprinted polymer for 17β‐estradiol was also studied with both static and dynamic methods. The results showed that the molecularly imprinted polymer possessed excellent recognition capacity for 17β‐estradiol (180.65 mg/g at 298 K), and also exhibited outstanding selectivity for 17β‐estradiol over the other competitive compounds (such as testosterone and progesterone). Then, the determination of trace 17β‐estradiol in beef samples was successfully developed by using molecularly imprinted polymer solid‐phase extraction coupled with high‐performance liquid chromatography. The limit of detection was 0.25 ng/mL, and the amount of 17β‐estradiol in beef samples was detected at 2.83 ng/g. This work proposed a sensitive, rapid, reliable, and convenient approach for the determination of trace 17β‐estradiol in complicated beef samples. 相似文献
17.
《Journal of separation science》2017,40(16):3358-3367
A practical and relatively simple method to identify molecularly imprinted polymers capable of binding proteins via the molecular tagging (epitope‐like) approach has been developed. In our two‐step method, we first challenge a previously obtained anti‐tag molecularly imprinted polymer with a small molecule including the said tag of choice (a biotin derivative as shown here or other) connected to a linker bound to a second biotin moiety. An avidin molecule partially decorated with fluorescent labels is then allowed to bind the available biotin derivative associated with the polymer matrix. At the end of this simple process, and after washing off all the low‐affinity binding molecules from the polymer matrix, only suitable molecularly imprinted polymers binding avidin through its previously acquired small molecule tag (or epitope‐like probe, in a general case) will remain fluorescent. For confirmation, we tested the selective performance of the anti‐biotin molecularly imprinted polymer binding it to biotinylated alkaline phosphatase. Residual chemical activity of the enzyme on the molecularly imprinted polymer solid support was observed. In all cases, the corresponding nonimprinted polymer controls were inactive. 相似文献
18.
An imprinted polymer using a disulfide derivative as a template was treated with NaBH4 to yield the polymer with thiol groups in the binding sites. The thiol groups were then oxidized with H2O2/AcOH to yield the molecularly imprinted polymer with sulfo groups in the binding sites. This site conversion can provide amine-imprinted polymers, in which amine is retained to the imprinted polymer by the strong electrostatic interaction between the amino group and the sulfo group in the binding sites. 相似文献
19.
以5-(4-羟基苯基)-10,15,20-三苯基卟啉锌为印迹分子,4-乙烯基吡啶为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了具有金属卟啉识别能力的分子印迹聚合物.紫外可见滴定光谱研究表明,功能单体与印迹分子在聚合前形成1:1的配合物.通过吸附试验、荧光光谱及斯卡查特分析法,考察了分子印迹聚合物对锌卟啉化合物的识别性能.结果表明,印迹聚合物对结构类似的卟啉化合物具有良好的识别能力,对印迹分子荧光性能的影响远大于其对应的非印迹聚合物.在浓度较低时,印迹聚合物对印迹分子的结合常数和最大结合量分别为:1.61×106L/mol和3.22×10-5mol/g. 相似文献
20.
Synthesis of a molecularly imprinted polymer on mSiO2@Fe3O4 for the selective adsorption of atrazine
《Journal of separation science》2018,41(13):2837-2845
Atrazine contamination of water is of considerable concern because of the potential hazard to human health. In this study, a magnetic molecularly imprinted polymer for atrazine was prepared by the surface‐imprinting technique using Fe3O4 as the core, mesoporous silica as the carrier, atrazine as the template, and itaconic acid as the functional monomer. The magnetic molecularly imprinted polymer was characterized by Fourier‐transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, and vibration‐sample magnetometry. The binding properties of the magnetic molecularly imprinted polymer toward atrazine were investigated by adsorption isotherms, kinetics, and competitive adsorption. It was found that the adsorption equilibrium was achieved within 2 h, the maximum adsorption capacity of atrazine was 8.8 μmol/g, and the adsorption process could be well described by the Langmuir isotherm model and pseudo‐second‐order kinetic model. The magnetic molecularly imprinted polymer exhibited good adsorption selectivity for atrazine with respect to structural analogues, such as cyanazine, simetryne, and prometryn. The reusability of the magnetic molecularly imprinted polymer was demonstrated for at least five repeated cycles without a significant decrease in adsorption capacity. These results suggested that the magnetic molecularly imprinted polymer could be used as an efficient material for the selective adsorption and removal of atrazine from water samples. 相似文献