有机/LRH复合体的合成及荧光性质研究

通过均匀沉淀法制备了硝酸根型层状铕氢氧化物（NO3--LEuH）,采用离子交换法将层间阴离子NO3-交换为苯丙氨酸（PHE）,得到了PHE/LRH复合体,并研究了其荧光性质.前躯体和复合体均有Eu3＋的5 D0-7FJ跃迁发射峰,在室温下发射出Eu3＋的特征红光,发射光谱峰位基本一致,但与NO3--LEuH相比,PHE/LRH复合体的发射峰强度大大减弱,表明将PHE引入LEuH层间对Eu3＋的荧光有猝灭作用.     

高磁场大分离间隙的高温和低温超导磁体失超特性分析

本文使用失超分析软件Opera3D对低温和高温超导磁体进行失超分析.这个超导磁体具有两个相互垂直的室温孔,磁体的中心磁场为8～10T.为了合理保护超导磁体,通过变换加热器不同的加热功率密度和加热时间,改变保护电路参数等设置,分析各不同方案计算结果的区别,总结规律,为满足工程需求提出更优的失超保护方案.     

Analysis of superconducting cavity quench events at SSRF

Quench is important and dangerous to superconducting RF cavities. This paper illustrates the mechanism of quench and how a quench detector works, and analyzes the quench events happening during beam operations and cavity conditioning. We find that the quench protection is mostly triggered by some reasons such as fluctuation of cavity voltage, multipacting or arc, rather than a real cavity thermal breakdown. The results will be beneficial to optimize the operation parameters of superconducting cavities, to discover the real reasons for beam trip by quench interlock, and to improve the operation stability of superconducting RF systems.     

A Rapid Freeze‐Quench Setup for Multi‐Frequency EPR Spectroscopy of Enzymatic Reactions

Electron paramagnetic resonance (EPR) spectroscopy in combination with the rapid freeze‐quench (RFQ) technique is a well‐established method to trap and characterize intermediates in chemical or enzymatic reactions at the millisecond or even shorter time scales. The method is particularly powerful for mechanistic studies of enzymatic reactions when combined with high‐frequency EPR (ν≥90 GHz), which permits the identification of substrate or protein radical intermediates by their electronic g values. In this work, we describe a new custom‐designed micro‐mix rapid freeze‐quench apparatus, for which reagent volumes for biological samples as small as 20 μL are required. The apparatus was implemented with homemade sample collectors appropriate for 9, 34, and 94 GHz EPR capillaries (4, 2, and 0.87 mm outer diameter, respectively) and the performance was evaluated. We demonstrate the application potential of the RFQ apparatus by following the enzymatic reaction of PpoA, a fungal dioxygenase producing hydro(pero)xylated fatty acids. The larger spectral resolution at 94 GHz allows the discernment of structural changes in the EPR spectra, which are not detectable in the same samples at the standard 9 GHz frequency.     

MRI、NMR低温超导磁体失超保护综述

用超导磁体制造NMR、MRI等核磁共振设备越来越普遍,超导磁体的失超保护在磁体设计中是一个很关键的问题.本文从失超保护方式,保护电路设计、加速失超方法等三个方面总结了如何为一个超导磁体尤其是核磁共振用超导磁体设计失超保护方案,指出了一些常见的问题的解决办法,最后还介绍并比较了一些常用失超模拟软件,以期为相关科研人员提供有价值的参考.     

Phase separation induced by shear quenching in polymer blends with a diblock copolymer

The effects of adding A–B diblock copolymer to a polymer blend (A/B) on phase‐separation kinetics and morphology have been investigated in a fixed shallow‐quench condition (ΔT = 1.5 °C) by in situ time‐resolved light scattering and phase‐contrast optical microscopy. A shear‐quench technique was used in this study instead of a conventional temperature‐quench method. Mixtures of nearly monodisperse low relative‐molecular masses of polybutadiene (M_w = 2.8 kg/mol), polystyrene (M_w = 2.6 kg/mol), and a near‐symmetric butadiene–styrene diblock copolymer (M_w = 6.3 kg/mol) as an interfacial modifier were studied. We observed that the addition of the diblock copolymer could either retard or accelerate the phase‐separation kinetics depending on the concentration of the diblock copolymer in the homopolymer blends. In contrast to the conventional temperature quench, we observed complex phase‐separation kinetics in the intermediate and late stages of phase separation by the shear‐quench technique. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 819–830, 2001     

InGaAs单光子探测器传感检测与淬灭方式

针对InGaAs单光子雪崩光电二极管(SPAD)的光电感应特性,研究了基于门控主动式淬灭的SPAD动态偏置控制和电路实现的策略.采用门控主动淬灭控制可降低淬灭时间,有效抑制暗计数和后脉冲效应.接口感应检测电路采用标准互补金属氧化物半导体(CMOS)工艺进行制造,而SPAD则采用非标准CMOS工艺.利用铟柱互连混合封装工艺实现SPAD与感应接口电路的协同工作.在低温-30?C的条件下,实现了SPAD光触发雪崩电流信号的提取和快速淬灭.研究了感应电阻和临界检测电压对传感检测电性能的影响,并采用简单电路结构实现状态检测,实测得到的SPAD恢复时间、传输延时分别为575,563 ps,淬灭时间为1.88 ns,满足纳秒级精度传感检测应用的需要.     

多层导体超导电缆的交流输电特性

在完成设计和制造我国第一组并网运行的超导电缆系统的工作中，我们对不同结构的超导电缆短样样品的交流载流特性进行了系统的研究，内容包括层电流均流特性、电缆失超特性、失超恢复特性、电缆载流能力和抗短路冲击能力等．结果表明，对多层螺旋导体结构的超导电缆，影响其输运电流在各导体层分布的主要因素是邻近效应．由于其零电阻特性，在相同的结构中，超导体表现出比常规导体大得多的临近效应．显著的邻近效应使多层导体结构的超导电缆的均流问题变得更加复杂．此类超导电缆有很强的抗短路电流冲击能力，能够承受高于额定电流20倍以上的短路电流，并且有很好的超导性能恢复能力．由于交流超导电缆的电压与电流相位差对电阻的变化非常敏感，所以可以被用作判断失超的预警参数用来避免热溃式失超的发生．     

The effects of annealing on fatigue crack propagation in polyethylene

Fatigue crack propagation tests on annealed and quenched medium-density polyethylene showed the annealed specimens to have much lower resistance to crack initiation and subsequent propagation. Although the same fracture mechanism, in which the brittle crack gradually becomes more ductile, prevailed in both cases, the voided and fibrillated crack tip root craze in the annealed material was much weaker that the nonfibrillated quenched root craze. Microstructural analyses indicate that the annealed material had separate crystallite populations, whereas the quenched material had a more homogeneous morphology. The highest melting fraction of the annealed material was composed of lamellae that were about 270 Å thick, and the quenched lamellae were estimated to be 160 Å thick. The reduced fatigue crack propagation resistance of the annealed material was suggested to be a result of a lower concentration of tie molecules and its reduced damping capability, compared to the quenched material. © 1995 John Wiley & Sons, Inc.     

场致发射阳极用钨网的寿命特性分析

 通过扫描电镜分析和实验验证，分析了场致发射阳极用钨网被破坏的成因。对钨网进行淬火处理，使钨网表面形成一定厚度的氧化膜，可显著提高钨网使用寿命。不同的淬火温度,将使钨网表面形成不同厚度的氧化膜。实验结果表明，氧化膜厚度的改变，将明显影响钨网的使用寿命。当脉宽90ns、束流6kA、能量1MeV的电子束透过钨网时，钨网表面的氧化膜厚度选在0.4μm左右为宜。