门控下InGaAs/InP单光子探测器用于符合测量的时域滤波特性研究

基于砷化镓/磷化铟雪崩光电二极管(InGaAs/InP APD)的半导体单光子探测器因工作在通信波段,且具有体积小、成本低、操作方便等优势,在实用化量子通信技术中发挥了重要作用.为尽可能避免暗计数和后脉冲对单光子探测的影响,InGaAs/InP单光子探测器广泛采用门控技术来快速触发和淬灭雪崩效应,有效门宽通常在纳秒量级.本文研究揭示了门控下单光子探测器可测量的最大符合时间宽度受限于门控脉冲的宽度,理论分析与实验结果良好拟合.该研究表明,门控下InGaAs/InP单光子探测器用于双光子符合测量具有显著的时域滤波特性,限制了其在基于双光子时间关联测量的量子信息技术中的应用.     

量子通信中单光子探测器的实验研究

为了提高单光子探测系统的灵敏度,实验采用InGaAs/InP雪崩光电二极管作为量子通信中的单光子探测器件,以门控脉冲模式实现了更高精度的单光子探测器的偏压生成电路、单光子信号放大电路、单光子信号检测电路和温度控制模块,并通过选用高精度前置放大器OP37和精密比较器AD8561,将量子效率提高到18.3%,暗计数控制小于4.1%×10~(-6)/ns.     

基于APD线列的单光子探测计数研究

单光子探测系统可以对单个光子进行探测;探测系统含有探测部分、淬灭电路部分和计数部分;探测部分主要由工作在盖革模式下的雪崩光电二极管组成;在盖革模式下的雪崩光电二极管发生雪崩后不能自然停止,淬灭部分主要为了主动抑制雪崩电流,快速降低雪崩电压,以达到提高探测效率,降低错误计数的目的;APD线列产生多个光子脉冲信号,计数部分的主要功能是对多路光子脉冲信号进行计数、显示并且可以控制每路APD的比较电压,保证每路APD淬灭电路的正常工作。     

用于LiDAR的16×1列阵CMOS单光子TOF图像传感器

设计了一款用于激光雷达的CMOS单光子飞行时间图像传感器.该传感器集成了16个结构优化的单光子雪崩二极管像素和一个双计数器结构的13-bit时间数字转换器电路.每个像素单元包括一个新型的主动淬灭-恢复电路.该设计通过优化器件的保护环来降低器件的暗噪声;带有反馈回路的主动淬灭-恢复电路用于降低死时间;时间数字转换器采用双计数器结构来避免计数器的亚稳态导致的计数错误.基于CMOS 180nm标准工艺制作了该传感器.测试结果表明:在1V的过偏压下,单光子雪崩二极管列阵的中值暗计数率为8kHz;在550nm波长光照下探测效率最高,为18%;设计的主动淬灭-恢复电路将死时间有效降低至8ns;时间数字转换器的分辨率为416ps,帮助整个系统实现厘米级距离分辨率.该传感器在0.5m距离下实现了空间分辨率为320×160的深度图像,其测距的最大非线性误差为1.9%,准确度为3.8%.     

基于背向喇曼散射的分布式光纤温度传感器APD最佳雪崩增益的分析

本文分析了基于背向喇曼散射的分布式光纤温度传感器中光电接收用雪崩光电二极管雪崩增益对接收电路信噪比的影响,给出了使传感系统接收电路输出信号信噪比最大这一最佳意义下APD雪崩增益的表达式并进行了分析,实验结果和理论分析基本一致.     

通讯波段单光子探测器的研制

将InGaAs/InP雪崩光电二极管应用于盖革模式下,采用门脉冲模式淬灭雪崩,并使用魔T混合网络抑制尖峰噪声,实现了通信波段1550 nm的单光子探测.在APD工作温度为223 K时,测得暗计数率与探测效率的比值为0.035.     

采用智能温度补偿电路的分布式光纤喇曼温度传感器

采用一种智能温度补偿电路对雪崩光电二极管的反偏电压进行温度补偿,抵消环境温度对雪崩光电二极管的影响,从而大大降低了系统的温度漂移.采用该温度补偿电路的系统可在0℃到60℃的环境温度范围内将温漂引起的测量偏差控制在±0.1℃之内.和传统的恒温装置相比,采用该温度补偿电路可有效地降低系统的功耗和成本.相对采用热敏电阻的温度...     

集成PIN光敏元的CMOS探测器光电响应特性研究

传统的CMOS图像传感器一般采用基于LV-CMOS工艺的N阱/P型衬底制备的PN光电二极管或者PPD二极管作为光敏元。PIN光敏元具有结电容小、量子效率高的特点。采用HV-CMOS(高压CMOS)工艺可以实现CMOS电路与PIN光敏元的单片集成。本文研究了集成PIN光敏元的CMOS探测器的光电响应特性以及NEP随像素大小和复位电压的变化关系。研究表明,将光敏元从PN光电二极管改为PIN光电二极管后,像素电荷增益可以提高一个数量级左右;同时,像素的瞬态电荷增益要大于传统认为的1/Cpd,并与二极管的大小以及复位电压紧密相关。研究发现,小像素因其更高的电荷增益和更低的等效噪声,更加适合弱信号下的短积分时间快速探测。若配合微透镜的使用,小像素在微光探测方面可以获得更大的优势。     

雪崩倍增GaAs光电导太赫兹辐射源研究进展

在飞秒激光激励下用GaAs光电导开关作为太赫兹(THz)辐射天线, 已经广泛用于太赫兹时域光谱系统, 但目前国际上都是使用GaAs光电导开关的线性工作模式, 而GaAs光电导开关的雪崩倍增工作模式所输出的超快电脉冲功率容量远大于其线性工作模式, 迄今为止, 还没有人提出用雪崩倍增机理的GaAs 光电导开关作为辐射源产生THz电磁辐射. 本文探讨了用 雪崩倍增工作模式的GaAs光电导开关作为光电导天线产生THz电磁波的可能性及研究进展. 通过理论分析及实验研究, 在实验上实现了: 1) 利用nJ量级飞秒激光触发GaAs光电导天线, 可以进入雪崩倍增工作模式; 2) 利用光激发电荷畴的猝灭模式, 可以使GaAs光电导天线载流子雪崩倍增模式的延续时间(lock-on 时间)变短. 这为利用具有雪崩倍增机理的GaAs光电导天线产生强THz辐射奠定了基础.     

分布式光纤温度传感器APD最佳倍增因子的分析

本文分析了分布式光纤温度传感器中光电接收用雪崩光电二极管倍增因子对接收信号的信噪比的影响，给出依据使传感系统光电接收电路输出信号信噪比最大这一最佳意义下ＡＰＤ雪崩因子的表达式，并对此结果进行了分析。     

Complete single-photon counting and timing module in a microchip

A complete module for single-photon counting and timing is demonstrated in a single chip. Features comparable with or better than commercially available macroscopic modules are obtained by integration of an active-quenching and active-reset circuit in complementary metal-oxide semiconductor technology together with a single-photon avalanche diode (SPAD). The integrated SPAD has a 12-microm-diameter sensitive area and operates with an overvoltage above breakdown adjustable up to 20 V. With a 5-V overvoltage the photon detection efficiency peaks above 40% around 500 nm, and the dark-counting rate is lower than 600 counts/s at room temperature. The overall counting dead time is 33 ns.     

Detection efficiency characteristics of free-running In Ga As/In P single photon detector using passive quenching active reset IC

In Ga As/In P avalanche photodiodes(APD) are rarely used in a free-running regime for near-infrared single photon detection. In order to overcome the detrimental afterpulsing, we demonstrate a passive quenching active reset integrated circuit. Taking advantage of the inherent fast passive quenching process and active reset to reduce reset time, the integrated circuit is useful for reducing afterpulses and is also area-efficient. We investigate the free-running single photon detector's afterpulsing effect, de-trapping time, dark count rate, and photon detection efficiency, and also compare with gated regime operation. After correction for deadtime and afterpulse, we find that the passive quenching active reset free-running single photon detector's performance is consistent with gated operation.     

Fast single-photon avalanche diode arrays for laser Raman spectroscopy

We incorporate newly developed solid-state detector technology into time-resolved laser Raman spectroscopy, demonstrating the ability to distinguish spectra from Raman and fluorescence processes. As a proof of concept, we show fluorescence rejection on highly fluorescent mineral samples willemite and spodumene using a 128×128 single-photon avalanche diode (SPAD) array with a measured photon detection efficiency of 5%. The sensitivity achieved in this new instrument architecture is comparable to the sensitivity of a technically more complicated system using a traditional photocathode-based imager. By increasing the SPAD active area and improving coupling efficiency, we expect further improvements in sensitivity by over an order of magnitude. We discuss the relevance of these results to in situ planetary instruments, where size, weight, power, and radiation hardness are of prime concern. The potential large-scale manufacturability of silicon SPAD arrays makes them prime candidates for future portable and in situ Raman instruments spanning numerous applications where fluorescence interference is problematic.     

Pile-up correction in characterizing single-photon avalanche diodes of high dark count rate

Although as a single-photon detector, the single-photon avalanche diode (SPAD) may be applied to multi-photon conditions. At a minimum, SPADs with a high dark count rate (DCR) demand a higher value of photon number per pulse to improve the signal-to-noise ratio. In this case, and without correction, severe pile-up distortion may induce a system error in the measurement of photon detection efficiency (PDE) and timing jitter. In this paper, we study the pile-up distortion in SPAD characterization by numerical simulation and experimentation, and introduce a pile-up correction method for the precise characterization of PDE and timing jitter in immature SPADs with an unintentionally high DCR. The results of this study are useful in the development of future SPADs.     

Tunneling in submicron CMOS single-photon avalanche diodes

Tunneling is studied in two main single-photon avalanche diode （SPAD） topologies, which are r~-tub guard ring （NTGR） and p-tub guard ring （PTGR）. Device sinmlation, I - V measurements, and dark count calculations and measurements demonstrate that tunneling is the main source of noise in NTGR, but it is less dominant in PTGR SPADs. All structures are characterized with respect to dark noise, photon detection probability, tinting jitter, afterpulsing probability, and breakdown voltage. Noise performmme is disturbed because of tunneling, whereas jitter performance is disturbed because of the short diffusion time of photo-generated minority carriers in NTGR SPADs. The maximum photon detection probability is enhanced because of an improvement in absorption thickness.     

高时间稳定性的雪崩光电二极管单光子探测器

雪崩光电二极管单光子探测器是一种具有超高灵敏度的光电探测器件,在远距离激光测距、激光成像和量子通信等领域有非常重要的应用.然而,由于雪崩光电二极管单光子探测器的雪崩点对工作温度高度敏感,因此在外场环境下工作时容易出现增益波动,继而导致单光子探测器输出信号的延时发生漂移,严重降低了探测器的时间稳定性.本文发展了一种稳定输出延时的方法,采用嵌入式系统控制雪崩光电二极管,使其处于恒定温度,并实时补偿由环境温度引起的延时漂移,实现了雪崩光电二极管单光子探测器的高时间稳定性探测.实验中,环境温度从16 ℃变化到36 ℃,雪崩光电二极管的工作温度稳定在15 ℃,经过延时补偿,雪崩光电二极管单光子探测器输出延时漂移小于±1 ps,时间稳定度达到0.15 ps@100 s.这项工作有望为全天候野外条件和空间极端条件下的高精度单光子探测应用提供有效的解决方法.     

基于单光子探测及脉冲位置调制的激光通信关键技术研究

为了实现高灵敏度的空间激光通信,并提高传输信道的抗干扰能力,将单光子探测技术和脉冲位置调制技术相结合,采用门控电路与反馈淬灭电路相结合的方式淬灭单光子探测器雪崩,设计了插入帧头法用于脉冲位置调制解调。用现场可编程门阵列进行了脉冲位置调制解调过程的仿真,验证了插入帧头法的有效性与可行性。在此基础上搭建了1 550 nm的脉冲位置调制激光通信实验,同时测试了单光子探测器在不同参数下的性能。结果表明,当探测效率为25%,触发延时为8.00 ns,门宽为5.0 ns,死时间为0.1μs时,单光子探测器性能最佳。最后测试了不同调制速率下单光子探测器的探测灵敏度,结果表明,当通信码速率为1 Mbps时,通信灵敏度为-51.8 dBm;当通信码速率为4 Mbps时,通信灵敏度为-41.0 dBm,实现了高灵敏度的空间激光通信。     

Photon-counting laser ranging with InGaAs/InP avalanche photodiode in the passively quenched and 1-GHz sinusoidally gated

We experimentally studied photon-counting laser ranging at 1550 nm using InGaAs/InP avalanche photodiode based single-photon detectors (SPDs). The SPDs operated in the passive quenching and 1-GHz sinusoidal gating Geiger modes, corresponding to continuous and quasi-continuous photon-counting ranging, respectively. Despite that the passively quenched SPD provided relatively high effective detection efficiency, quasi-continuous photon-counting ranging excelled the continuous one with fast acquisition speed and improved depth resolution due to the short deadtime and low timing jitter of the SPD in 1-GHz sinusoidally gated mode.