Discharge characteristics of the DUHOCAMIS with a high magnetic bottle-shaped field

For the purpose of producing high intensity, multiply charged metal ion beams, the dual hollow cathode ion source for metal ions (DUHOCAMIS) was derived from the hot cathode Penning ion source combined with the hollow cathode sputtering experiments in 2007. To investigate the behavior of this discharge geometry in a stronger magnetic bottle-shaped field, a new test bench for DUHOCAMIS with a high magnetic bottle-shaped field up to 0.6 T has been set up at the Peking University. The experiments with magnetic fields from 0.13 T to 0.52 T have indicated that the discharge behavior is very sensitive to the magnetic flux densities. The slope of discharge curves in a very wide range can be controlled by changing the magnetic field as well as regulated by adjusting the cathode heating power; the production of metallic ions would be much greater than gas ions with the increased magnetic flux density; and the magnetic field has a much higher influence on the DHCD mode than on the PIG mode.     

Afterglow工作模式下ECR离子源脉冲束的产生

为满足国家大科学工程兰州重离子冷却储存环的要求,在14.5GHz ECR 离子源上进行afterglow工作模式的实验,首次产生了高电荷态脉冲束流Ar¹¹⁺和Ar¹²⁺,给出了初步实验结果,并对结果进行了分析和解释.     

Charge state distribution analysis of Al and Pb ions from thelaser ion source at IMP

A prototype laser ion source that could demonstrate the possibility of producing intense pulsed high charge state ion beams has been established with a commercial Nd:YAG laser (E_max=3 J,1064 nm,8-10 ns) to produce laser plasma for the research of Laser Ion Source (LIS). At the laser ion source test bench,high purity (99.998%) aluminum and lead targets have been tested for laser plasma experiment. An Electrostatic Ion Analyzer (EIA) and Electron Multiply Tube (EMT) detector were used to analyze the charge state and energy distribution of the ions produced by the laser ion source. The maximum charge states of Al¹²⁺ and Pb⁷⁺ were achieved. The results will be presented and discussed in this paper.     

基于太赫兹技术的药物检测

鉴于太赫兹辐射特有的光谱分辨性、功能性成像特点以及良好的穿透性和安全性等,太赫兹波谱技术迅速成为物质分析与检测等的重要工具。文章基于太赫兹时域光谱技术的实验数据,结合泛函密度理论(DFT)和HIPHOP模型,对一系列降糖类药物进行分子解析和功能基团识别;结合支持向量机理论(SVM),对4种郁金类中草药进行分析识别;并结合差式扫描量热法对葡萄糖-水合物的结晶水状态进行测定;最后对太赫兹时域技术在药物检测方面的优势和不足做了进一步的分析与展望。     

ECR源的新工作模式

叙述了兰州重离子加速器ＥＣＲ２源所使用的新工作模式的条件、特点及高电荷态离子束的输出性能，给出了对该模式特点的初步分析．     

C60-地塞米松的激光激发

利用激光光解装置检测了C60-地塞米松(C60-DE)的苯溶液在355 nm激光照射下产生的激发三重态, 3C60-DE*出现四个吸收峰, 分别位于700、440、350 和310 nm. 在330 nm处观察到了它的漂白吸收最大值, 这与其基态吸收最大值相对应. 3C60-DE*能够将能量转移给O2分子而淬灭. 与3C60*相比, 3C60-DE*的三重态鄄三重态(T-T)淬灭速率常数减小(3C60*为(5.03±1.31)×109 L·mol-1·s-1, 3C60-DE*为(3.53±0.87)×109 L·mol-1·s-1), 而寿命增加了(3C60*为(12.0±2.6) μs, 3C60-DE*为(18.0±3.3) μs), 这可能是C60分子上连接了地塞米松分子后减小了C60球之间碰撞的几率所致.     

ECR-SFC轴向注入系统聚束器效率的研究

为了减少目前SFC轴向注入系统中聚束器杂散电场对束流轴向注入效率的影响, 提高新系统中SFC的束流俘获效率, 参考原始设计, 对目前聚束器的电极结构进行了设计改进. 两种情况下的聚束器杂散场对注入效率影响的计算表明, 改进后0B02的聚束效率较目前有较大提高. 同时计算了束流空间电荷效应对聚束效率的影响, 据此对新SFC轴向注入系统中聚束器的位置进行了重新调整.     

束流线性耦合效应的初步研究

在储存环的束流传输系统中,斜四极场和纵向螺线管场是引起束流线性耦合的主要原因.由于这种耦合,使得束流的幅度和发射度发生交换,引起束流横向包络的增大,严重的将造成束流损失.从Betatron运动方程出发研究了斜四极场和螺线管场存在时束流的幅度耦合效应,分析了斜四极场存在时束流发射度的变化.     

ECR离子源六极永磁体的设计研究

分别从材料、结构、尺寸等方面全面地研究了Halbach结构六极永磁铁的设计方法.针对个别磁块可能存在的退磁问题给出了相应的解决方案.通过优化结构,使六极磁铁在离子源等离子体弧腔内壁产生的磁场达到最大.用POISSON,PERMAG,TOSCA等多个磁场模拟程序计算模拟了六极磁场的大小与分布,并给出了一些相应的曲线