低温恒温器控制可靠性优化及分析

低温恒温器安全阀和爆破片动作引起的低温系统故障对ADS注入器II直线加速器的运行效率和维护成本造成了较大影响。自行研制的多路调节阀手动控制器在不改变现有低温控制系统的前提下,实现了低温恒温器回气阀的冗余控制。通过运用独立失效可靠性模型,定性和定量分析改造前后低温恒温器控制的可靠性变化,证明低温恒温器控制可靠性得到了提高。该技术路线对CiADS低温控制系统的可靠性设计有借鉴意义。     

Afterglow工作模式下ECR离子源脉冲束的产生

为满足国家大科学工程兰州重离子冷却储存环的要求,在14.5GHz ECR 离子源上进行afterglow工作模式的实验,首次产生了高电荷态脉冲束流Ar¹¹⁺和Ar¹²⁺,给出了初步实验结果,并对结果进行了分析和解释.     

Charge state distribution analysis of Al and Pb ions from thelaser ion source at IMP

A prototype laser ion source that could demonstrate the possibility of producing intense pulsed high charge state ion beams has been established with a commercial Nd:YAG laser (E_max=3 J,1064 nm,8-10 ns) to produce laser plasma for the research of Laser Ion Source (LIS). At the laser ion source test bench,high purity (99.998%) aluminum and lead targets have been tested for laser plasma experiment. An Electrostatic Ion Analyzer (EIA) and Electron Multiply Tube (EMT) detector were used to analyze the charge state and energy distribution of the ions produced by the laser ion source. The maximum charge states of Al¹²⁺ and Pb⁷⁺ were achieved. The results will be presented and discussed in this paper.     

一台14.5GHz新型高磁场高电荷态ECR离子源

自行研制成功一台14.5GHz新型高磁场高电荷态电子回旋共振(ECR)离子源.描述了该离子源结构特点、参数优化及其磁场分布,并给出了调试测量结果.该离子源轴向磁镜场在轴线上的最高磁场可达1.5T,六极永磁体在弧腔内表面磁场可达1.0T.经初步调试,可得到0⁷+140eμA,Ar¹¹+185eμA,Xe²⁶⁺50eμA.所得结果与1998年国际上最好的ECR离子源进行了比较.     

高电荷态ECR离子源——LECR3

研制成功了一台新的高电荷态ECR离子源,该离子源主要为原子物理实验提供各种高电荷态离子束流,是基于中国科学院近代物理研究所14.5GHz高电荷态ECR离子源设计建成的,同时在该离子源中应用多种有利于提高束流强度的技术,设计时考虑到采用双频加热,试图通过试验双频加热模式来提高高电荷态离子的产额,并设计建造了一套束流聚焦分析系统,以提高电荷态分辨率和束流传输效率.     

SECRAL在18GHz频率下产生强流高电荷态离子束的初步结果

A Superconducting ECR ion source with Advanced design in Lanzhou (SECRAL) was successfully built to produce intense beams of highly charged ions for Heavy Ion Research Facility in Lanzhou (HIRFL).The ion source has been optimized to be operated at 28GHz for its maximum performance.The superconducting magnet confinement configuration of the ion source consists of three axial solenoid coils and six sextupole coils with a cold iron structure as field booster and clamping.For 28GHz operation,the magnet assembly can produce peak mirror fields on axis 3.6T at injection,2.2T at extraction and a radial sextupole field of 2.0T at plasma chamber wall.A unique feature of SECRAL is that the three axial solenoid coils are located inside of the sextupole bore in order to reduce the interaction forces between the sextupole coils and the solenoid coils. During the ongoing commissioning phase at 18GHz with a stainless steel chamber,tests with various gases and some metals have been conducted with microwave power less than 3.2kW and it turned out the performance is very promising.Some record ion beam intensities have been produced,for instance,810eμA of O~(7 ),505eμA of Xe~(20 ),306eμA of Xe~(27 ),21eμA of Xe~(34 ),2.4eμA of Xe~(38 ) and so on.To reach better results for highly charged ion beams,further modifications such as an aluminium chamber with better cooling,higher microwave power and a movable extraction system will be done,and also emittance measurements are being prepared.     

兰州全永磁ECR离子源——LAPECR1

The Lanzhou All Permanent magnet ECR ion source NO.1(LAPECR1)is the first all permanent magnet multiple ECRIS made in IMP.This ECRIS is running at 14.5GHz and can provide intense low charge state ion beams(varying from several to hundreds of eμA)or medium charge state ion beams(varying from several to tens of eμA).The size of source body is (?)102mm×296mm,the compactness and economical features enable the source suitable to be put on a HV platform or equipped by a small laboratory.This article gives the main parameters of the ion source.     

加速器驱动次临界系统注入器Ⅱ的真空控制系统

真空系统是加速器驱动次临界系统项目注入器Ⅱ的重要组成部分之一,为了保证其工作效率设计了一种基于实验物理及工业控制系统(EPICS)架构的远程控制系统。根据被控设备硬件接口的特点及控制需求分别采用PLC和串口服务器等作为控制设备,在主控机中使用LabView编程实现了对系统内所有设备的监控,并借助于DSC模块把设备状态和参数等以过程变量的形式进行网络发布。同时根据系统特点设计了软硬件相结合的连锁保护方案,增加了系统的可靠性,为5 MeV束流实验的顺利进行提供保障。