凹形树突状PtCu纳米催化剂的合成及对甲醇的电催化

以邻苯二胺为表面活性剂,通过水热釜法一步制备凹形树突状PtCu双金属纳米催化剂(PtCu NCDs)。PtCu NCDs在电催化甲醇氧化(MOR)的应用中表现出非常高的活性和很强的抗有毒中间体作用。PtCu NCDs对于甲醇氧化的质量活性为(0.53 A·mg^-1 Pt)是商业Pt/C(0.26 A·mg^-1 Pt)的2.04倍。从比活性的CV曲线图对比发现PtCu NCDs(1.07 mA·cm^-2)是商业Pt/C(0.55 mA·cm^-2)的1.95倍。而且,PtCu NCDs(2.76)比商业Pt/C催化剂(1.02)表现出更高的I_f/I_b比值。这些优异的电催化活性可能归功于PtCu NCDs特殊的凹形树突状形貌。     

TpPa-NH2的(1s)-(+)-10-樟脑磺酰氯衍生物毛细管电色谱手性柱的研究北大核心CSCD

本文采用溶剂热法,以2-硝基-1,4-苯二胺(Pa-NO_(2))和1,3,5-三甲基间苯三酚(Tp)合成一种非手性的共价有机骨架,将其还原后再用(1s)-(+)-10-樟脑磺酰氯修饰成具有手性的多孔有机材料。采用X射线衍射、红外光谱、圆二色谱、热重分析、氮吸附-脱附和扫描电镜对该材料进行表征。结果表明,经衍生后的手性材料有较好的空间结构和热稳定性。由该材料制成的手性毛细管电色谱柱成功拆分了乙酸仲丁酯及2-碘丁烷两种手性化合物。通过对分离电压、缓冲溶液的浓度和pH值等因素的考察,得到了乙酸仲丁酯及2-碘丁烷的最佳分离条件。以乙酸仲丁酯为分析物对该柱性能进行评价,表明该柱具有良好的稳定性和重现性,且对手性药物具有一定的拆分能力,可用作毛细管电色谱固定相。     

Co_(3)O_(4)/CeO_(2)复合电极材料的制备与超级电容器电化学性能研究

利用六水合硝酸铈、六水合硝酸钴和尿素通过水热法合成麦叶状Co_(3)O_(4)/CeO_(2)复合电极材料,对其进行电化学性能分析,发现Co_(3)O_(4)/CeO_(2)复合电极材料具有良好的电化学可逆性和功率特性,且其电容特性和大电流放电特性也很优越,是理想的超级电容器材料.     

ZnO衍射花样180°不唯一性的消除

晶体电子衍射花样涉及到界面、位错等缺陷的晶体学性质测定时,需要设法消除180°不唯一性这一问题.应用Tecnai G~2 F20场发射透射电镜精密的倾斜样品台使晶体做有系统的倾转,观察衍射花样的变化并加以分析,从而消除了ZnO粉末单晶花样的180°不唯一性.     

凹形树突状PtCu纳米催化剂的合成及对甲醇电催化的研究

以邻苯二胺为表面活性剂,通过水热釜法一步制备凹形树突状PtCu双金属纳米催化剂(PtCu NCDs)。PtCu NCDs在电催化甲醇氧化(MOR)的应用中表现出非常高的活性和很强的抗有毒中间体作用。PtCu NCDs对于甲醇氧化的质量活性为(0.53 A·mg^-1 Pt)是商业Pt/C(0.26 A·mg^-1 Pt)的2.04倍。从比活性的CV曲线图对比发现PtCu NCDs(1.07 mA·cm^-2)是商业Pt/C(0.55 mA·cm^-2)的1.95倍。而且,PtCu NCDs(2.76)比商业Pt/C催化剂(1.02)表现出更高的I_f/I_b比值。这些优异的电催化活性可能归功于PtCu NCDs特殊的凹形树突状形貌。     

Chemoenzymatic synthesis of Ro 25-8210 and Ro 25-6630

Here we report the chemoenzymatic synthesis of Ro 25-8210 (1) and Ro 25-6630 (2) by using microbial reduction of a-chloromethyl ketone 4 mediated with baker's yeast and Geotrichum sp. to afford the optically active (R) and (S)-α-chlorohydrin 8 respectively as the key step.     

酶化学合成一对对映体Ro 25-8210和Ro 25-6630

利用白地霉菌株和啤酒酵母催化还原α－氯代酮　４分别制得光学活性的（Ｒ）和（Ｓ）－α－氯代酶 ８，并以它们作为关键步骤合成了 Ｒｏ２５－８２１０（１）和 Ｒｏ２５－６６３０（２）．     

Single event effect in a ferroelectric-gate field-effect transistor under heavy-ion irradiation

The single event effect in ferroelectric-gate field-effect transistor （FeFET） under heavy ion irradiation is investigated in this paper. The simulation results show that the transient responses are much lower in a FeFET than in a conventional metal-oxide-semiconductor field-effect transistor （MOSFET） when the ion strikes the channel. The main reason is that the polarization-induced charges （the polarization direction here is away from the silicon surface） bring a negative surface po- tential which will affect the distribution of carders and charge collection in different electrodes significantly. The simulation results are expected to explain that the FeFET has a relatively good immunity to single event effect.     

透射电镜三维重构确定金纳米粒子的立体结构

贵金属纳米颗粒具有局域表面等离激元这一特性使其具有丰富的光学性质,而这一特性受制于纳米颗粒所形成的立体几何形状,而透射电镜和扫描电镜的二维图像不能真切地观测和确定纳米颗粒所形成的立体几何结构。透射电镜三维重构技术可作为一种确定纳米颗粒立体结构的直观有效的方法。本文利用透射电镜的三维重构技术,选择合适的参数进行二维图像的采集、图像匹配对中及重构、立体模型的构建,从而通过构建的模型对两种金纳米颗粒样品的不同几何形状所产生的边界形态进行了确认和分析。     

Reversible alternation between bipolar and unipolar resistive switching in La-SrTiO_3 thin films

The alternation from bipolar to unipolar resistive switching is observed in perovskite La0.01Sr0.99TiO3thin films.These two switching modes can be activated separately depending on the compliance current(Icomp)during the electroforming process:with a higher Icomp(5 mA)the unipolar resistance switching behavior is measured,while the bipolar resistance switching behavior is observed with a lower Icomp(1 mA).On the basis of I–V characteristics,the switching mechanisms for the URS and BRS modes are considered as being a change in the Schottky-like barrier height and/or width at the Pt/La-SrTiO3interface and the formation and disruption of conduction filaments,respectively.