A self-penetrating and chemically stable zinc (ii)-organic framework as multi-responsive chemo-sensor to detect pesticide and antibiotics in water

Guided by the self-penetrating features can improve the stability of metal organic frameworks (MOFs), an unprecedented 3D self-penetrated framework, {[Zn (tptc)_0.5(bimb)]·H₂O}_n ( NUC-6 , here NUC corresponding to North University of China), with 3D (4,4)-c {8⁶} net, was designed. Benefit from the high chemical stability and excellent luminescent property, NUC-6 can be act as an efficient multi-response chemo-sensor in detecting dichloronitroaniline pesticide and nitrofuran antibiotics in water with the detection limits are 116 ppb for DCN pesticide, 16 ppb for NFT antibiotic, and 12 ppb for NTZ antibiotic. Besides, the mechanisms of luminescence quenching were revealed from the viewpoint of internal filter effect (IFE) and photo-induced electron transfer (PET), implied by the optical spectroscopy and quantum chemical calculation. This work provides a promising strategy to design stable MOFs by improving the self-penetrating features and to expand their practical applications in the detection of organic pollutants in aqueous medium.     

X射线荧光光谱法测定重整铂催化剂中氯

建立重整铂催化剂中氯的X射线荧光光谱测定方法。通过研磨机将铂催化剂研磨至粒径小于75 μm的颗粒,采用仪器压片制样,通过测量不同氯含量样品的计数率,建立铂催化剂中氯含量与计数率的线性关系。氯的质量分数在0.85%~1.04%范围内与计数率成良好的线性关系,相关系数为0.9995,检出限为0.0076%。样品加标回收率为96.2%~104.2%,测定结果的相对标准偏差小于2%(n=6)。该法测定结果与电位滴定法相吻合。该方法精密度高,分析速度快,满足重整装置生产调整的要求。     

Kinetics studies of 5-methyl-2-hexanol, 2,2-dimethyl-3-hexanol,and 2,4,4-trimethyl-1-pentanol with chlorine atoms: Photooxidation mechanism of 2,4,4-trimethyl-1-pentanol

The rate constants for the reaction between chlorine atoms and either 5-methyl-2-hexanol, 2,2-dimethyl-3-hexanol, or 2,4,4-trimethyl-1-pentanol at 298 K were determined using the relative method with 2-butanol and 1-pentanol as reference compounds. The values obtained for 5-methyl-2-hexanol, 2,2-dimethyl-3-hexanol, and 2,4,4-trimethyl-1-pentanol (k × 10¹⁰ cm³ molec⁻¹ s⁻¹) were, respectively, (2.64 ± 0.5), (2.72 ± 0.5), and (2.50 ± 0.4), in agreement with the values of the rate constants reported in bibliography for similar alcohols and the values estimated by structure activity relationship methods. The photooxidation products of 2,4,4-trimethyl-1-pentanol initiated by chlorine atoms were identified (formaldehyde, 2-propanone, 2,2-dimethyl propanal, 4,4,-dimethyl-2-pentanone, and 3,3-dimethylbutanal), and the reaction mechanism was determined.     

Spreading of Oil Droplets Containing Surfactants and Pesticides on Water Surface Based on the Marangoni Effect

Oil droplets containing surfactants and pesticides are expected to spread on a water surface, under the Marangoni effect, depending on the surfactant. Pesticides are transported into water through this phenomenon. A high-speed video camera was used to measure the movement of Marangoni ridges. Gas chromatography with an electron capture detector was used to analyze the concentration of the pesticide in water at different times. Oil droplets containing the surfactant and pesticide spread quickly on the water surface by Marangoni flow, forming an oil film and promoting emulsification of the oil–water interface, which enabled even transport of the pesticide into water, where it was then absorbed by weeds. Surfactants can decrease the surface tension of the water subphase after deposition, thereby enhancing the Marangoni effect in pesticide-containing oil droplets. The time and labor required for applying pesticides in rice fields can be greatly reduced by using the Marangoni effect to transport pesticides to the target.     

Method validation,residue analysis and dietary risk assessment of trifloxystrobin and trifloxystrobin acid in milk,eggs and pork

Trifloxystrobin (TFS) is a widely used strobilurin fungicide and its residues accumulating in animal-derived food could result in potential harm to consumers. By optimization of extraction solvents and cleanup sorbents, a residue analysis method for TFS and its metabolite trifloxystrobin acid (TFSA) was established in milk, eggs and pork based on QuEChERS sample preparation and LC–MS/MS. The calibration curves exhibited good linearity with determination coefficients (R²) >0.9930 over the range of 0.5–250 ng/ml for both TFS and TFSA. The recoveries of the two analytes were 81–100% with RSD 3–10% and 76–96% with RSD 2–13%, respectively. The limit of quantification (LOQ) was 1 ng/g for both analytes. The milk, egg and pork samples, 30 each, were collected from the 30 main producing regions in China, and residues of TFS and TFSA were analyzed. The concentrations of both analytes were lower than the corresponding LOQs and maximum residue limits. Long-term dietary risk assessment showed that the hazard quotients were 0.001–0.003%, indicating an absence of unacceptable risks in milk, eggs and pork to the health of common consumers in China.     

凝胶渗透色谱-气相色谱-离子阱质谱法测定桔梗原药和当归提取物中101种农药残留

建立了凝胶渗透色谱（GPC）-气相色谱-离子阱质谱同时检测桔梗原药和当归提取物中101种农药残留的分析方法。方法采用乙腈超声辅助提取桔梗原药和当归提取物,浓缩提取液至近干后用乙酸乙酯-环己烷（1∶1, v/v）复溶,采用凝胶渗透色谱法（选取40 cm长、内径20 mm的凝胶渗透色谱柱）对样品进行净化,弃去前段含脂类、色素等杂质的流出液,收集17~30 min洗脱液并旋转蒸发浓缩至近干,甲苯1 mL定容上机。选用DB-5MS毛细管色谱柱分离待测物,通过离子阱质谱实现对101种农药残留的高效检测。方法通过优化前处理条件和离子阱二级质谱参数,有效降低了复杂中药基质对待测化合物的干扰,最大限度提高了样品中农药的定量准确性和回收率,101种农药3水平添加的平均回收率为58.3%~108.9%,每个添加水平10次独立重复测定的相对标准偏差为0.4%~16.5%,检出限（LOD）范围为0.2~40.0 μg/kg,可满足当前韩国、日本、欧洲规定的最大残留限量（maximum residue limits, MRLs）要求。方法具有操作简单快速、灵敏度高、重复性好等特点,凝胶渗透色谱技术的应用克服了固相萃取小柱净化容量不足的弊端,离子阱技术的应用可以进一步排除共流出基体杂质的干扰,提高定量和定性的准确性,检测效果优于常用的气相色谱-质谱法,是对中药中同时分析多种农药残留检测方法的有益补充。     

超高效液相色谱-四极杆-飞行时间质谱同时筛查腐败血液中24种农药

利用超高效液相色谱-四极杆-飞行时间质谱(UPLC-Q-TOF-MS)技术建立了腐败血液中24种常见投毒农药的快速筛查方法。采用Qu ECh ERS方法进行样品前处理。腐败血液经乙腈-水(4∶1)提取,同时加入无水硫酸镁脱水,超声后过0.22μm滤膜后直接测定。目标药物经ACQUITY UPLCTMHSS C18柱分离,以乙腈和0.1%甲酸-甲酸铵水溶液为流动相进行梯度洗脱,采用正离子全信息串联质谱扫描模式(MSE)进行筛查。结果表明,腐败血液中24种农药的检出限(LOD,S/N=3)为0.43~10.0 ng/m L;3个加标水平下的平均回收率为61%~98%,相对标准偏差(RSD)为1.5%~16.9%。该方法快速简便、灵敏度较高,可用于腐败血液中24种常见投毒农药的快速筛查。     

植物酯酶应用于有机磷农药残留分析技术的研究进展

有机磷农药残留在食品中,进入人体危害人类健康.因此,快速而灵敏的检测技术是预防农药残留危害的前提条件.而酶抑制技术正是一项快速检验技术.本文作者介绍了农药残留分析的现状,详细分析了植物酯酶应用于农药残留分析技术的研究进展.     

Amorphous Silicon: New Insights into an Old Material

Amorphous silicon is synthesized by treating the tetrahalosilanes SiX₄ (X=Cl, F) with molten sodium in high boiling polar and non‐polar solvents such as diglyme or nonane to give a brown or a black solid showing different reactivities towards suitable reagents. With regards to their technical relevance, their stability towards oxygen, air, moisture, chlorine‐containing reaction partners RCl (R=H, Cl, Me) and alcohols is investigated. In particular, reactions with methanol are a versatile tool to deliver important products. Besides tetramethoxysilane formation, methanolysis of silicon releases hydrogen gas under ambient conditions and is thus suitable for a decentralized hydrogen production; competitive insertion into the MeO?H versus the Me?OH bond either yields H‐ and/or methyl‐substituted methoxy functional silanes. Moreover, compounds, such as Me_nSi(OMe)_4?n (n=0–3) are simply accessible in more than 75 % yield from thermolysis of, for example, tetramethoxysilane over molten sodium. Based on our systematic investigations we identified reaction conditions to produce the methoxysilanes Me_nSi(OMe)_4?n in excellent (n=0:100 %) to acceptable yields (n=1:51 %; n=2:27 %); the yield of HSi(OMe)₃ is about 85 %. Thus, the methoxysilanes formed might possibly open the door for future routes to silicon‐based products.     

Assessment of intermolecular N–H…F and N–H…Cl hydrogen bonding in stabilising hetero- and homodimers in solution

This paper describes the first assessment of intermolecular weak N–H…F and N–H…Cl hydrogen bonding in stabilising hetero- and homodimers in solution. Aromatic amide and urea monomers have been designed and synthesised. The association constants of the heterodimers formed by two complementary monomers and the homodimers formed by self-complementary monomers have been determined by using ¹H titration and dilution experiments. The results show that both N–H…F and N–H…Cl hydrogen bonds are able to stabilise the corresponding dimers to a measurable extent, even though the stability of the dimers is generally low.