A lithium‐organic framework as a fluorescent sensor for detecting aluminum (III) ion

Due to the low coordination number and the relatively weak coordination ability, it is a great challenge to introduce Li⁺ into the construction of metal–organic frameworks (MOFs). Here, one Li‐based metal–organic framework (Li‐MOF), [Li₄L(DMF)₂]_n ( HNU‐31 ), is constructed by the assembly of LiNO₃ and 5‐(bis(4‐carboxybenzyl)amino)isophthalic acid (H₄L) ligand, which possesses a 3D framework, and can be serve as a luminescent sensor for detecting Al³⁺ ion with the detection limit of 4 × 10^?6 M.     

Syntheses,Structures and Characterization of Four Metal‐Organic Frameworks constructed by 2,2′,6,6′‐Tetramethoxy‐4,4′‐biphenyldicarboxylic Acid

Four metal‐organic frameworks (MOFs), {[Mn_3.5L(OH)(HCOO)₄(DMF)] · H₂O} ( 1 ), {[In_2.5L₂O(OH)_1.5(H₂O)₂] · DMF · CH₃CN · 2H₂O} ( 2 ), {[Pb₄L₃O(DMA)] · CH₃CN} ( 3 ), and {[LaL(NO₃)(DMF)₂] · 2H₂O} ( 4 ) were synthesized by utilizing the ligand 2,2′,6,6′‐tetramethoxy‐4,4′‐biphenyldicarboxylic acid (H₂L) via solvothermal methods. All MOFs were characterized by single‐crystal X‐ray diffraction, powder X‐ray diffraction, thermogravimetric analysis, and infrared spectroscopy. In 1 , the Mn²⁺ ions are interconnected by formic groups in situ produced via DMF decomposition to form a rare 2D macrocyclic plane, which is further linked by L^2– to construct the final 3D network. In 2 , 1D zip‐like infinite chain is formed and then interconnected to build the 3D framework. In 3 , a [Pb₆(μ₄‐O)₂(O₂C)₁₀(DMA)₂] cluster with a centrosymmetric [Pb₆(μ₄‐O)₂]⁸⁺ octahedral core is formed in the 3D structure. In 4 , the La³⁺ ions are connected with each other through carboxylate groups of L^2– to generate 1D zigzag chain, which is further linked by L^2– to construct a 3D network with sra topology. Solid photoluminescence properties of 3 and 4 were also investigated.     

Postsynthetic-Modified PANI/MOF Composites with Tunable Thermoelectric and Photoelectric Properties

A 3D Co-based metal–organic framework ( Co-MOF ) with two kinds of large pores filled by free Co²⁺ ions and ligands was synthesized and characterized. To expand the MOF structure and conductivity, the free Co²⁺ ions and ligands were exchanged by conductive ionic liquid EtpyBr and photosensitive AgNO₃ through single crystal-to-single crystal transformation, which produced structure-changed 3D MOFs Co-MOF-Br and Co-Ag-MOF , which were characterized by single-crystal X-ray diffraction. Incorporating small quantities of doped polyaniline (PANI) with redox activity into the pores could further tune the stability and conductivity of the three MOFs. The PANI/MOFs all show outstanding electrical conductivity (≈10⁻² S cm⁻¹), and PANI/ Co-MOF-Br has the largest p-type Seebeck coefficient of 66.6 μV K⁻¹. PANI/ Co-MOF-Br and PANI/ Co-Ag-MOF have 4 and 15 times higher photocurrent density compared with PANI/ Co-MOF , respectively. This work sheds light on the design of advanced electrically conductive 3D MOFs.     

Isostructural Metal–Organic Frameworks Assembled from Functionalized Diisophthalate Ligands through a Ligand‐Truncation Strategy

Four isostructural metal–organic frameworks (MOFs) with various functionalized pore surfaces were synthesized from a series of diisophthalate ligands. These MOFs exhibit a new network topology of {4.6⁴.8}₂{4².6⁴}{6⁴.8²}₂{6⁶}. Hydrogen uptake as high as 2.67 wt % at 77 K/1 bar and CO₂ uptake of 15.4 wt % at 297 K/1 bar have been observed for PCN‐308, which contains ? CF₃ groups. The isostructural series of MOFs also showed reasonable adsorption selectivity of CO₂ over CH₄ and N₂.     

Two Highly Stable Proton Conductive Cobalt(II)–Organic Frameworks as Impedance Sensors for Formic Acid

Metal–organic frameworks (MOFs) have been extensively explored as advanced chemical sensors in recent years. However, there are few studies on MOFs as acidic gas sensors, especially proton conductive MOFs. In this work, two new proton-conducting 3D MOFs, {[Co₃(p-CPhHIDC)₂(4,4′-bipy)(H₂O)] ⋅ 2 H₂O}_n ( 1 ) (p-CPhH₄IDC=2-(4-carboxylphenyl)-1 H-imidazole-4,5-dicarboxylic acid; 4,4′-bipy=4,4′-bipyridine) and {[Co₃(p-CPhHIDC)₂(bpe)(H₂O)] ⋅ 3 H₂O}_n ( 2 ) (bpe=trans-1,2-bis(4-pyridyl)ethylene) have been solvothermally prepared and investigated their formic acid sensing properties. Both MOFs 1 and 2 show temperature- and humidity-dependent proton conductive properties and exhibit optimized proton conductivities of 1.04×10⁻³ and 7.02×10⁻⁴ S cm at 98 % relative humidity (RH) and 100 °C, respectively. The large number of uncoordinated carboxylic acid sites, free and coordination water molecules, and hydrogen-bonding networks inside the frameworks are favorable to the proton transfer. By measuring the impedance values after exposure to formic acid vapor at 98 % or 68 % RH and 25 °C, both MOFs indicate reproducibly high sensitivity to the analyte. The detection limit of formic acid vapor is as low as 35 ppm for 1 and 70 ppm for 2 . Meanwhile, both MOFs also show commendable selectivity towards formic acid among interfering solutions. The proton conducting and formic acid sensing mechanisms have been suggested according to the structural analysis, E_a calculations, N₂ and water vapor absorptions, PXRD and SEM measurements. This work will open a new avenue for proton-conductive MOF-based impedance sensors and promote the potential application of these MOFs for indirectly monitoring the concentrations of formic acid vapors.     

H2S Sensors: Fumarate‐Based fcu‐MOF Thin Film Grown on a Capacitive Interdigitated Electrode

Herein we report the fabrication of an advanced sensor for the detection of hydrogen sulfide (H₂S) at room temperature, using thin films of rare‐earth metal (RE)‐based metal–organic framework (MOF) with underlying fcu topology. This unique MOF‐based sensor is made via the in situ growth of fumarate‐based fcu ‐MOF (fum‐ fcu ‐MOF) thin film on a capacitive interdigitated electrode. The sensor showed a remarkable detection sensitivity for H₂S at concentrations down to 100 ppb, with the lower detection limit around 5 ppb. The fum‐ fcu ‐MOF sensor exhibits a highly desirable detection selectivity towards H₂S vs. CH₄, NO₂, H₂, and C₇H₈ as well as an outstanding H₂S sensing stability as compared to other reported MOFs.     

Charge-Separated and Lewis Paired Metal–Organic Framework for Anion Exchange and CO2 Chemical Fixation

Charge-separated metal–organic frameworks (MOFs) are a unique class of MOFs that can possess added properties originating from the exposed ionic species. A new charge-separated MOF, namely, UNM-6 synthesized from a tetrahedral borate ligand and Co²⁺ cation is reported herein. UNM-6 crystalizes into the highly symmetric P43n space group with fourfold interpenetration, despite the stoichiometric imbalance between the B and Co atoms, which also leads to loosely bound NO₃⁻ anions within the crystal structure. These NO₃⁻ ions can be quantitatively exchanged with various other anions, leading to Lewis acid (Co²⁺) and Lewis base (anions) pairs within the pores and potentially cooperative catalytic activities. For example, UNM-6-Br, the MOF after anion exchange with Br⁻ anions, displays high catalytic activity and stability in reactions of CO₂ chemical fixation into cyclic carbonates.     

Acid-triggered interlayer sliding of two-dimensional copper(i)–organic frameworks: more metal sites for catalysis

The interlay sliding of two-dimensional (2D) metal–organic and covalent–organic frameworks (MOFs and COFs) affects not only the layout features of the structures, but also the functional output of the materials. However, the control of interlay stacking is the major hurdle that needs to be overcome to construct new functional layer materials. Herein, we report the preparation of a pair of isostructural 2D copper(i) organic frameworks with an eclipsed AA stacking structure, namely JNM-3-AA, and a staggered ABC stacking topology, denoted JNM-3-ABC, by combining the chemistry of MOFs and COFs. The variation of interlayer stacking largely influences their functionality, including porosity (BET surface areas of 695.61 and 34.22 m² g⁻¹ for JNM-3-AA and JNM-3-ABC, respectively), chemical stability, and catalytic activities (less than 10% or ∼86% yield using JNM-3-AA or JNM-3-ABC as catalysts for click reaction, respectively). More interestingly, the structure transformation from JNM-3-ABC to JNM-3-AA is readily achieved by simple addition of trifluoroacetic acid accompanied by the extension of porosities from BET surface areas of 34.22 to 441.22 m² g⁻¹, resulting in in situ acceleration of the adoption rate (removal efficiency increases from ∼10 to 99.9%), which is rarely observed in 2D MOFs and COFs.

The addition of TFA can trigger the interlay sliding of 2D copper(i) organic frameworks prepared by combing the chemistry of MOFs and COFs. The variation of interlay stacking largely affected the porosity, chemical stability and catalytic activities.     

Highly Luminescent Lanthanide Metal-Organic Frameworks with Tunable Color for Nanomolar Detection of Iron(III), Ofloxacin and Gossypol and Anti-counterfeiting Applications

Solvothermal reaction of 5,5′-(pyridine-2,6-diylbis(oxy))diisophthalic acid (H₄L) with europium(III) or terbium(III) nitrates in acetonitrile-water (1 : 1) at 120 °C gave rise to isostructural 2D coordination polymers, [Ln(HL)(H₂O)₃]_∞ ( NIIC-1-Eu and NIIC-1-Tb ), the layers of which are composed by eight-coordinated lanthanide(III) ions interconnected by triply deprotonated ligands HL³⁻. The layers are packed in the crystal without any specific intermolecular interactions between them, allowing the facile preparation of stable water suspensions, in which NIIC-1-Tb exhibited top-performing sensing properties through luminescence quenching effect with exceptionally low detection limits towards Fe³⁺ (LOD 8.62 nM), ofloxacin (OFX) antibiotic (LOD 3.91 nM) and cotton phytotoxicant gossypol (LOD 2.27 nM). In addition to low detection limit and high selectivity, NIIC-1-Tb features fast sensing response (within 60–90 seconds), making it superior to other MOF-based sensors for metal cations and organic toxicants. The photoluminescence quantum yield of NIIC-1-Tb was 93 %, one of the highest among lanthanide MOFs. Mixed-metal coordination polymers NIIC-1-Eu_xTb_1−x demonstrated efficient photoluminescence, the color of which could be modulated by the excitation wavelength and time delay for emission monitoring (within 1 millisecond). Furthermore, an original 2D QR-coding scheme was designed for anti-counterfeiting labeling of goods based on unique and tunable emission spectra of NIIC-1-Ln coordination polymers.     

Microporous La–Metal–Organic Framework (MOF) with Large Surface Area

A microporous La–metal‐organic framework (MOF) has been synthesized by the reaction of La(NO₃)₃ ? 6 H₂O with a ligand 4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoate (TATAB) featuring three carboxylate groups. Crystal structure analysis confirms the formation of 3D MOF with hexagonal micropores, a Brunauer–Emmett—Teller (BET) surface area of 1074 m² g^?1 and high thermal and chemical stability. The CO₂ adsorption capacities are 76.8 cm³ g^?1 at 273 K and 34.6 cm³ g^?1 at 293 K, a highest measured CO₂ uptake for a Ln–MOFs.     

Optimization of butyltin measurements for seawater,tissue, and marine sediment samples

Optimized techniques for measuring butyltins at the sub-part-per-trillion (ppb; 1:10¹²) level in seawater and at the part-per-billion (ppb; 1:10⁹) level in tissues and sediments are presented. Purge and trap/hydride derivatization followed by atomic absorption (AA) detection was optimized to give better sensitivity than was previously attained for seawater, yielding environmental detection limits of 0.08–0.2 ng dm^?3. Improvement in precision and reproducibility in measurement of butyltins in tissues and sediments was attained by adjustment of the concentration in an organic extract to minimize matrix effects and by use of internal standards. The tissues and sediments were homogenized and extracted with methylene chloride (CH₂Cl₂) after acidification. The butyltins in the organic layer were derivatized with hexylmagnesium bromide and analyzed by gas chromatography (GC) with a flame photometric detector (FPD). The absolute detection limits in tissues and sedimets were 0.1 ng for tributyltin (TBT), 0.12 ng for dibutyltin (DBT) and 0.29 ng for monobutyltin (MBT).     

Highly Stable Copper(I)–Thiacalix[4]arene-Based Frameworks for Highly Efficient Catalysis of Click Reactions in Water

Environmentally friendly metal–organic frameworks (MOFs) have gained considerable attention for their potential use as heterogeneous catalysts. Herein, two Cu^I-based MOFs, namely, [Cu₄Cl₄L] ⋅ CH₃OH ⋅ 1.5 H₂O ( 1-Cl ) and [Cu₄Br₄L] ⋅ DMF ⋅ 0.5 H₂O ( 1-Br ), were assembled with new functionalized thiacalix[4]arenes (L) and halogen anions X⁻ (X=Cl and Br) under solvothermal conditions. Remarkably, catalysts 1-Cl and 1-Br exhibit great stability in aqueous solutions over a wide pH range. Significantly, MOFs 1-Cl and 1-Br , as recycled heterogeneous catalysts, are capable of highly efficient catalysis for click reactions in water. The MOF structures, especially the exposed active Cu^I sites and 1D channels, play a key role in the improved catalytic activities. In particular, their catalytic activities in water are greatly superior to those in organic solvents or even in mixed solvents. This work proposes an attractive route for the design and self-assembly of environmentally friendly MOFs with high catalytic activity and reusability in water.     

SERS-Active MIL-100(Fe) Sensory Array for Ultrasensitive and Multiplex Detection of VOCs

The application of metal–organic frameworks (MOFs) as SERS-active platforms in multiplex volatile organic compounds (VOCs) detection is still unexplored. Herein, we demonstrate that MIL-100 (Fe) serves as an ideal SERS substrate for the detection of VOCs. The limit of detection (LOD) of MIL-100(Fe) for toluene sensing can reach 2.5 ppm, and can be even further decreased to 0.48 ppb level when “hot spots” in between Au nanoparticles are employed onto MIL-100 (Fe) substrate, resulting in an enhancement factor of 10¹⁰. Additionally, we show that MIL-100(Fe) substrate has a unique “sensor array” property allowing multiplex VOCs detection, with great modifiability and expandability by doping with foreign metal elements. Finally, the MIL-100(Fe) platform is utilized to simultaneously detect the different gaseous indicators of lung cancer with a ppm detection limit, demonstrating its high potential for early diagnosis of lung cancer in vivo.     

Solvothermal Preparation of a Lanthanide Metal-Organic Framework for Highly Sensitive Discrimination of Nitrofurantoin and l-Tyrosine

Metal-organic frameworks (MOFs) have been rapidly developed for their broad applications in many different chemistry and materials fields. In this work, a multi-dentate building block 5-(4-(tetrazol-5-yl)phenyl)-isophthalic acid (H₃L) containing tetrazole and carbolxylate moieties was employed for the synthesis of a two-dimensional (2D) lanthanide MOF [La(HL)(DMF)₂(NO₃)] (DMF = N,N-dimethylformamide) (1) under solvothermal condition. The fluorescent sensing application of 1 was investigated. 1 exhibits high sensitivity recognition for antibiotic nitrofurantoin (K_sv: 3.0 × 10³ M⁻¹ and detection limit: 17.0 μM) and amino acid l-tyrosine (K_sv: 1.4 × 10⁴ M⁻¹ and detection limit: 3.6 μM). This work provides a feasible detection platform of 2D MOFs for highly sensitive discrimination of antibiotics and amino acids.     

Palladium Single Atoms on TiO2 as a Photocatalytic Sensing Platform for Analyzing the Organophosphorus Pesticide Chlorpyrifos

Traditional methods for analyzing organophosphorus pesticide chlorpyrifos, usually require the tedious sample pretreatment and sophisticated bio‐interfaces, leading to the difficulty for real‐time analysis. Herein, we use palladium single‐atom (PdSA)/TiO₂ as a photocatalytic sensing platform to directly detect chlorpyrifos with high sensitivity and selectivity. PdSA/TiO₂, prepared by an in situ photocatalytic reduction of PdCl₄^2? on the TiO₂, shows much higher photocatalytic activity (10 mol g^?1 h^?1) for hydrogen evolution reaction than Pd nanoparticles (1.95 mol g^?1 h^?1), and excellent stability. In the presence of chlorpyrifos, the photocatalytic activity of PdSA/TiO₂ decreases. Through this inhibition effect the platform can realize a detection limit for chlorpyrifos of 0.01 ng mL^?1, much lower than the maximum residue limit (10 ppb) permitted by the U.S. Environmental Protection Agency.     

Photochemical In Situ Exfoliation of Metal–Organic Frameworks for Enhanced Visible-Light-Driven CO2 Reduction

Two novel two-dimensional metal–organic frameworks (2D MOFs), 2D-M₂TCPE (M=Co or Ni, TCPE=1,1,2,2-tetra(4-carboxylphenyl)ethylene), which are composed of staggered (4,4)-grid layers based on paddlewheel-shaped dimers, serve as heterogeneous photocatalysts for efficient reduction of CO₂ to CO. During the visible-light-driven catalysis, these structures undergo in situ exfoliation to form nanosheets, which exhibit excellent stability and improved catalytic activity. The exfoliated 2D-M₂TCPE nanosheets display a high CO evolution rate of 4174 μmol g⁻¹ h⁻¹ and high selectivity of 97.3 % for M=Co and Ni, and thus are superior to most reported MOFs. The performance differences and photocatalytic mechanisms have been studied with theoretical calculations and photoelectric experiments. This study provides new insight for the controllable synthesis of effective crystalline photocatalysts based on structural and morphological coregulation.     

A new luminescent anionic metal–organic framework based on heterometallic zinc(II)–barium(II) for selective detection of Fe3+ and Cu2+ ions in aqueous solution

Over the past two decades, the development of novel inorganic–organic hybrid porous crystalline materials or metal–organic frameworks (MOFs) using crystal engineering has provoked significant interest due to their potential applications as functional materials. In this context, luminescent MOFs as fluorescence sensors have recently received significant attention for the sensing of ionic species and small molecules. In this work, a new luminescent heterometallic zinc(II)–barium(II)‐based anionic metal–organic framework, namely poly[imidazolium [triaqua(μ₆‐benzene‐1,3,5‐tricarboxylato)bariumtrizinc] tetrahydrate], {(C₃H₄N₂)[BaZn₃(C₉H₃O₆)₃(H₂O)₃]·4H₂O}_n ( 1 ), was synthesized under hydrothermal conditions and characterized. Compound 1 presents a three‐dimensional framework with an unprecedented (3,5)‐connected topology of the point symbol (3.9²).(3³.4².5.9³.10), and exhibits `turn‐off' luminescence responses for the Cu²⁺ and Fe³⁺ ions in aqueous solution based on significantly different quenching mechanisms.     

Selective sensing of CrVI and FeIII ions in aqueous solution by an exceptionally stable TbIII-organic framework with an AIE-active ligand

We herein report a new lanthanide metal-organic framework (MOF) that exhibits excellent chemical stability, especially in the aqueous solution over a wide pH range from 1 to 14. In contrast to many reported lanthanide MOFs, this Tb-based MOF emits cyan fluorescence inherited from the integrated AIE-active ligand, rather than Ln³⁺ ions. More remarkably, its fluorescence signal features a highly selective and sensitive “turn-off” response toward CrO₄²⁻, Cr₂O₇²⁻ and Fe³⁺ ions, highlighted with the low detection limits down to 68.18, 69.85 and 138.8 ppm, respectively. Thus, the exceptional structural stability and sensing performance render this material able to be a superior luminescent sensor for heavy metal ions in wastewater.     

A Facile Grinding Method for the Synthesis of 3D Ag Metal–Organic Frameworks (MOFs) Containing Ag6Mo7O24 for High-Performance Supercapacitors

Successful synthesis of three kinds of dynamically stable compounds by a simple grinding method is reported, giving Ag₆Mo₇O₂₄, Ag-BTC (Ag-MOF, BTC=benzene-1,3,5-tricarboxylic acid), and {Ag₆Mo₇O₂₄}@Ag-MOF metal–organic frameworks (MOFs). According to the electrochemical dynamic analysis, these materials have pseudocapacitor behavior and high capacitance. The unique nanorod structure of {Ag₆Mo₇O₂₄}@Ag-MOF provides more active sites, faster ion/electron transfer, and electrolyte diffusion pathways, resulting in excellent specific capacitance (971 F g⁻¹) higher than the other compounds. {Ag₆Mo₇O₂₄}@Ag-MOF (glassy carbon electrode) also has an excellent rate ability (60.1 %) and long cycle stability (98 % retention after 5000 cycles). In addition, the fully symmetrical button battery (with nickel foam as the current collector) fabricated with {Ag₆Mo₇O₂₄}@Ag-MOF delivers an energy density of 11.1 Wh kg⁻¹ at 600.1 Wh kg⁻¹ coupled with excellent cycling stability (86.4 %) at 1.2 V. These results demonstrate a new simple grinding method to prepare polyoxometalate-based metal–organic frameworks (POMOFs) for high-performance materials.     

Rational Syntheses of CdII and PbII Metal‐Organic Frameworks for Luminescence Sensing of Nitroaromatics,Ferric and Chromate Ions

The metal‐organic frameworks (MOFs), {[Cd(L)(H₂O)] · CH₃OH · DMF} ( 1 ) and [Pb(L)(DMF)] ( 2 ) (L = 2,4‐dihydroxybenzaldehyde nicotinoylhydrazone), were synthesized and characterized using microanalyses, IR spectroscopy, and single‐crystal X‐ray diffraction. Single crystal X‐ray analyses revealed that both 1 and 2 exhibit 2D grid networks. The photoluminescence investigation indicates that 1 and 2 could be a prospective candidate for developing luminescencent sensors for the selective sensing of nitrobenzene, which is used as a precursor for explosives. The luminescent properties of 1 and 2 in different solvents were investigated and corroborated by theoretical calculations. Additionally compounds 1 and 2 also show selective sensing ability for Fe³⁺ as well as for CrO₄^2– ions.