2-取代吡啶半菁染料的无溶剂微波合成及光谱性质的理论研究

在微波促进无溶剂条件下, 由N-甲基-2-甲基吡啶碘盐与取代芳香醛在哌啶作用下合成了一系列2-取代的吡啶半菁染料, 产物结构由元素分析, ¹H NMR, MS, IR, UV得到确认. 该方法操作简便, 收率高. 在此基础上, 对N-甲 基-2-(p-N,N-二甲氨基-苯乙烯基)吡啶半菁染料的光谱性质进行了理论计算.     

锂离子电池正极材料LiMn2O4的合成与晶体结构（英）

Spinel LiMn₂O₄ powders were prepared using two-step synthesis method consisting of solid-state reaction method and citrate modified sol-gel method. The effects of the calcination temperature and the Li/Mn ratio of raw materials were studied on the physicochemical and electrochemical properties of the spinel LiMn₂O₄ powders, such as crystallinity, lattice constant and density. The title compound was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Polycrystalline LiMn₂O₄ powers calcined at 750 ℃ were found to be composed of very uniformly-sized microcrystal with an average particle size of 300 nm. The improvement in electrochemical properties was mainly attributed to the process of re-grinding by absolute alcohol.     

KINETIC ANALYSIS OF CO-CONDENSATION POLYMERIZATION OF AB2 AND AB MONOMERS

This work deals with the kinetics of co-condensation polymerization of AB2 and AB monomers, giving expressions of the two-dimensional molecular weight distribution function and the number/weight average molecular weights of the resulting copolymers. The two-dimensional molecular weight distribution depends on two indices, n and l, which are the respective numbers of AB2 and AB units in a copolymer species. The evolution of the two-dimensional weight and z distributions during the co-condensation polymerization has been evaluated systematically. Finally, the two-dimensional distribution was transformed into a one-dimensional molecular weight distribution with only one variable (the molecular weight of the products instead of the degree of polymerization). The calculated results show that the highly branched copolymer has a very broad molecular weight distribution when the co-condensation polymerization approaches completion.     

K-La-Ni/Si-2催化低碳烷烃与二氧化碳重整制合成气(英文)

Ｎｉ／Ｓｉ２催化剂具有较好的低碳烷烃与二氧化碳重整制合成气的反应性能，添加Ｌａ２Ｏ３助剂和Ｋ２Ｏ助剂可提高催化剂活性和合成气收率，从而进一步改善催化剂的低碳烷烃与ＣＯ２重整制合成气的反应性能，研制的ＫＬａＮｉ／Ｓｉ２催化剂，用于天然气与ＣＯ２重整反应制合成气可达９７％的低碳烷烃转化率和９５％以上的合成气收率。     

负载型TiO2-聚酰亚胺亲水复合膜的制备与分离性能

采用溶解－流涎法，湿相转换法和干湿相转换法制轩了负载型ＴｉＯ２－聚酰亚胺亲水复合膜，采用扫描电镜，红外光谱，压汞和透气性实验等手段对该膜的孔径分布，表面结构及扩散性能进行了表征，并讨论了制备亲水对膜孔结构的影响，实验结果表明，三种膜均具有很好的亲水性能，而干湿相转换膜具有良好的孔径分布和分离性能。     

配位聚合物{[Co(μ-4,4′-bpy)(4,4′-bpy)2·(H2O)2]·(4,4′-bipy)·(H2O)4·(OH)3·(Me)4N}n的晶体结构及性质

配位聚合物通常是通过某种有机配体与金属的配位几何选择以及无限网络的拓扑结构控制而形成的具有无限结构的化合物 [1] ,其结构新颖并具有不寻常的光电效应、非线性光学性能、磁性、超导及催化等诸多具有诱人应用前景的独特性能 .因此 ,近年来倍受化学家和材料学家的重视 [2～ 5] .以 Co为配位中心的配位聚合物若具有八面体构型 ,在一定条件下具有自旋转换能力 ,而且往往可与光电转换能力相关联 ,是一种潜在的新型信息存储材料 [6 ] .对于配位聚合物的形成 ,配体的选择最重要 . 4,4′-联吡啶及其衍生物是一种较好的刚性配体 ,相关的配位聚…     

微波辐照下无皂阳离子聚(St-MMA)高分子纳米粒子的制备和表征

讨论了微波辐照下 ,以丙酮 水为分散介质 ,利用阳离子型自由基引发剂偶氮二异丁基脒盐酸盐(AIBA)引发苯乙烯 (St)和甲基丙烯酸甲酯 (MMA)共聚 ,合成出表面带正电荷的P(St MMA)共聚物纳米粒子 ,考察了丙酮用量、单体和引发剂浓度对纳米粒子粒径、粒径分布和乳液稳定性的影响 .结果表明 ,丙酮 水的体积比由 0增加到 1 2 6∶1时 ,粒子的平均水化半径从 12 2 2 1nm降低到 2 4 6 8nm ,粒径分布变宽 ,乳液抗电解质稳定性逐渐增强 ;增加引发剂和共聚单体MMA的浓度 ,粒子的水化半径逐渐减小 ,粒径分散系数增大 .     

CCl2自由基与H2O分子反应动力学研究

用213 nm激光光解CCl4产生CCl2自由基，用LP LIF技术测定了室温下基态CCl2自由基与H2O分子的反应速率常数为(5.45±0.95)×10－14 cm3•molecule－1•s－1.在G2MP2理论水平上计算了CCl2＋H2O反应的最低单重态势能面，揭示了插入与加成 消除两种反应机理，得到了三个可能的产物通道:HCl＋HClCO、HCl＋trans ClCOH以及HCl＋cis ClCOH.并用RRKM TST和传统过渡态理论计算了这三个通道的分支比及其温度效应.结果说明在低温下（273 K），插入机理的产物通道的分支比远大于加成 消除机理的产物通道， HCl＋HClCO是主要产物，分支比为77.4％，其次是HCl＋cis ClCOH，分支比为22.6％.而在高温下（3000 K），加成 消除机理的反应通道大于插入机理， HCl＋trans ClCOH分支比为82.3％.     

Novel Chiral Aminophosphine Ligand:Synthesis and Application in Saymmetric Catalytic Hydrogenation Reaction

A new chiral aminophosphine ligand 6,6′-dimethoxy-2,2′-bis(diphenylphosphinoamino)biphenyl(DMBDPPABP) was prepared and its rhodium complex was found to be an effective catalyst for the asymmetric hydrogenation of amidoacrylic acid and its dervatives.The effects of solvent and reaction temperature on enantioselectivity were also studied.     

Cu/SiO2催化剂上苯胺和乙二醇一步合成吲哚的研究

采用浸渍法，制备了用于合成吲哚的Cu/SiO2催化剂，研究了不同载体和活性组分Cu对苯胺和乙二醇一步合成吲哚反应的催化活性，发现γ-Al2O3、活性炭、Na-Y，SiO2-MgO、MCM41、SiO26种载体中，SiO2是最好的载体；催化剂活性组分Cu含量为0.78mmol/gSiO2时，吲哚的收率高达88%，考察了水蒸汽、氢气、反应温度及接触时间等因素对反应性能的影响，并对催化剂进行了TG测试，得到了Cu/Sio2催化剂催化合成吲哚适应反应条件。