兰州重离子加速器冷却存储环控制系统

为了完成建设兰州重离子加速器冷却存储环,自主研发设计了其大型分布式控制系统。控制系统从功能上分为三层:业务管理层、前端控制层以及设备控制层。业务管理层主要包含控制管理程序、中心数据库以及同步时间系统;前端控制层主要包含前端服务器、前端控制器以及各其他控制器等;设备控制层主要为微控制单元 (MCU)多功能控制器以及被控设备等。其中中央数据库存储整个加速器的所有控制数据,为变能时控制系统的控制数据切换提供数据支持。从长期运行情况来看,控制系统需要进行相应的改进,但是能基本满足现行的实验需求。     

HITFiL同步加速器剥离注入

一台新的治癌专用加速器HITFiL正在设计和建造中,其中一台同步加速器为其主加速器,以高紧凑性、高可靠性和低成本为设计目标。同步加速器的注入系统采用剥离注入方式,剥离注入与单圈注入方式相比能达到较高的注入效率,而其造价明显低于多圈注入加电子冷却的注入方式。治癌采用碳粒子束,从ECR离子源产生的C5+离子经过回旋加速器预加速后在同步加速器注入点处剥离成为C6+注入到环里。详细阐述了该注入系统的设计方案,并对整个注入过程进行了计算机模拟。在模拟过程中,对束流的注入效率、束流损失机制和粒子数增益进行了研究,得到了实空间和相空间的粒子分布和发射度增长趋势,得到了满足要求的束流流强。     

A particle-in-cell mode beam dynamics simulation of medium energy beam transport for the SSC-Linac

A new linear accelerator system, called the SSC-Linac injector, is being designed at HIRFL (the heavy ion research facility of Lanzhou). As part of the SSC-Linac, the medium energy beam transport (MEBT) consists of seven magnetic quadrupoles, a re-buncher and a diagnose box. The total length of this segment is about 1.75 m. The beam dynamics simulation in MEBT has been studied using the TRACK 3D particle-in-cell code, and the simulation result shows that the beam accelerated from the radio frequency quadrupole (RFQ) matches well with the acceptance of the following drift tube linac (DTL) in both the transverse and longitudinal phase spaces, and that most of the particles can be captured by the final sector focusing cyclotron for further acceleration. The longitudinal emittance of the RFQ and the longitudinal acceptance of the DTL was calculated in detail, and a multi-particle beam dynamics simulation from the ion source to the end of the DTL was done to verify the original design.     

CR超导二极铁导线的3D有限元失超模拟

利用FEM软件ANSYS对德国GSI的FAIR项目的超导二极铁的超导线进行了失超模拟. 该模拟形象地给出导线的失超过程, 通过APDL编程可以得到失超传播速度, 失超时导体的端电压随时间的变化. 文章还进一步研究了导线的最小失超传播区域MPZ, 失超段初始温度和电流对失超传播速度的影响.     

CSR空间电荷效应的研究

针对兰州重离子加速器冷却储存环的流强设计 ,对其空间电荷效应进行了讨论 .随着流强增高和发射度降低 ,束流自作用场效应 (空间电荷效应 )逐渐显现 .散焦的空间电荷力造成的粒子自由振荡频移和束流包络增长 ,带来了不稳定因素 ,这些不稳定因素就限定了储存环的流强极限.Cooler Storage Ring (CSR), an upgrading program planned at the Heavy Ion Research Facility in Lanzhou (HIRFL), will supply beams with higher quality and intensity. Space charge effects should be considered due to this magnitude of intensity in CSR. The concept and some phenomena of space charge effects are discussed. Space charge intensity limit and space charge tune shift of normal CSR operation are given. It is of significance for the construction and operation of the future facility.     

Electromagnetic characteristics of the CH cavity

In this paper, we present the RF simulation, the fabrication and the normal RF test of a six-cell copper model cross bar H mode (CH) cavity. The CH cavity was researched and developed at the Institute of Modern Physics for Injector II of the superconducting linac of the accelerator driven system of China, operating at a frequency 162.5 MHz, β=0.065. The deep drawing and electron beam welding were employed to fabricate this cavity, which would be used to develop the superconducting CH cavity in the future. The results of the normal RF test agree with the simulation of the electromagnetic properties, such as the electric field distribution on the cavity axis, frequency and Q factor.     

Optimal design of a 7 T highly homogeneous superconducting magnet for a Penning trap

A Penning trap system called Lanzhou Penning Trap（LPT） is now being developed for precise mass measurements at the Institute of Modern Physics（IMP）.One of the key components is a 7 T actively shielded superconducting magnet with a clear warm bore of 156 mm.The required field homogeneity is 3 × 10-7 over two 1 cubic centimeter volumes lying 220 mm apart along the magnet axis.We introduce a two-step method which combines linear programming and a nonlinear optimization algorithm for designing the multi-section superconducting magnet.This method is fast and flexible for handling arbitrary shaped homogeneous volumes and coils.With the help of this method an optimal design for the LPT superconducting magnet has been obtained.     

PIC mode simulation of solenoid collimation channel

A new SSC （Separated Sector Cyclotron）-Linac is being designed to serve as an injector for the SSC at the HIRFL （Heavy Ion Research Facility Lanzhou）. The beam intensity at the LEBT （Low Energy Beam Transport） for the heavy ions after the selection is typically low and the space charge effects are inconspicuous. The space charge effects become obvious when the beam current increases to a few hundred microamperes. The emittance growth deriving from the space charge effects may be particularly troublesome for the following linac and cyclotron. An optical system containing three solenoids has been designed for the LEBT to limit the beam emittance and to avoid the unnecessary beam loss in the cyclotron, as well as for the purpose of immunizing the LEBT emittance growth due to the space charge effects. The results of the PIC （Particle- In-Cell） mode simulation illustrate that this channel could limit the beam emittance growth and increase the beam brightness.     

A Particle-in-cell scheme of the RFQ in the SSC-Linac

A 52 MHz Radio Frequency Quadrupole （RFQ） linear accelerator （linac） is designed to serve as an initial structure for the SSC-Linac system （injector into Separated Sector Cyclotron）.The designed injection and output energy are 3.5 keV/u and 143 keV/u,respectively.The beam dynamics in this RFQ have been studied using a three-dimensional Particle-In-Cell （PIC） code BEAMPATH.Simulation results show that this RFQ structure is characterized by stable values of beam transmission effciency （at least 95%） for both zerocurrent mode and the space charge dominated regime.The beam accelerated in the RFQ has good quality in both transverse and longitudinal directions,and could easily be accepted by Drift Tube Linac （DTL）.The effect of the vane error and that of the space charge on the beam parameters have been studied as well to define the engineering tolerance for RFQ vane machining and alignment.     

兰州重离子加速器冷却储存环主环二极铁电源设计

主环二极铁电源是兰州重离子加速器冷却储存环(HIRFL-CSR)工程的关键设备和指标要求最高的一台电源,采用了独特的拓扑和控制策略。为满足峰值功率3.15MW(3kA,1.45kV)的输出能力和快脉冲要求,采用了晶闸管整流并联脉宽调制补偿单元的主电路拓扑结构和特殊的控制方式,这套综合方案确保电源满足了全部技术指标。本文介绍了该拓扑结构的原理和优势,讨论了为满足±2×10-4的跟踪误差的要求而采用的控制拓扑和双基准给定的原理,并简介了调试过程和近年来的运行和改进情况。