Mechanical design and analysis of a low beta squeezed half-wave resonator

A superconducting squeezed type half-wave resonator （HWR） of β=0.09 has been developed at the Institute of Modern Physics, Lanzhou. In this paper, a basic design is presented for the stiffening structure for the detuning effect caused by helium pressure and Lorentz force. The mechanical modal analysis has been investigated the with finite element method （FEM）. Based on these considerations, a new stiffening structure is proposed for the HWR cavity. The computation results concerning the frequency shift show that the low beta HWR cavity with new stiffening structure has low frequency sensitivity coefficient df/dp and Lorentz force detuning coefficient KL, and stable mechanical properties.     

Structural analysis of quarter-wave resonators in IMP

The taper-shaped superconducting quarter wave resonators with frequency of 80.5 MHz, β of 0.041 and 0.085 have been pre-researched. The radio frequency (RF) design of the cavities has been completed, and the structural design is also an important aspect which will be discussed in the following. The frequency shift caused by the etching effects of the surface treatment, the helium bath pressure and the Lorentz force, and the mechanical modes caused by the microphonic excitation have been analyzed. The results show that the frequency variation from the Lorentz force is not serious and stiffening rings are explored aimed at decreasing the deformation brought by the helium pressure and microphonic excitation.     

C-ADS超导轮辐腔Spoke021的电磁设计与优化

为满足C-ADS项目建设对超导轮辐腔Spoke021的需求,对Spoke021进行了详细的电磁参数优化。对Spoke021的参数化模型进行参数扫描,针对腔体的关键电磁特征量寻找可能存在的极值,详细分析、解释了优化过程中各个参数发生变化的物理意义。在Spoke021各参数达到最终优化值时,表征腔体性能的两个关键比值分别为:E_p/E_(acc)=3.14,Bp/E_(aCC)=4.77 mT/(MV/m)。考虑到次级电子倍增(Multipacting,MP)对Spoke021运行中所能达到的性能指标有很重要影响,对腔体的MP进行了建模分析。结果表明,当Spoke021工作在E_(acc)=10 MV/m情况下,没有发生MP,优化得到的参数可以满足Spoke021工程设计的需要;最后计算了腔体的TTF曲线,表明该腔体具有较宽的速度接受度。     

Mechanical design and analysis of a low beta squeezed half-wave resonator

A superconducting squeezed type half-wave resonator(HWR)ofβ=0.09 has been developed at the Institute of Modern Physics,Lanzhou.In this paper,a basic design is presented for the stiffening structure for the detuning effect caused by helium pressure and Lorentz force.The mechanical modal analysis has been investigated the with finite element method(FEM).Based on these considerations,a new stiffening structure is proposed for the HWR cavity.The computation results concerning the frequency shift show that the low beta HWR cavity with new stiffening structure has low frequency sensitivity coefficient df/dp and Lorentz force detuning coefficient KL,and stable mechanical properties.     

褐煤品质的傅里叶变换近红外光谱定量分析

采用傅里叶变换浸反射近红外光谱法采集了94个褐煤样品的Kubelka Munk(KM)光谱数据,同时建立了褐煤的全水分、内水分、挥发分、含硫量、高位发热量、低位发热量和折合率7个指标的偏最小二乘(PLS)定量分析预测模型,并对预测模型进行了验证,验证结果显示:全水分、内水分、挥发分、含硫量、高位发热量、低位发热量和折合率的相对误差分别为9.1%、11%、2.8%、10%、3.4%、2.5%、3.4%,得到了满意的预测效果,基本达到了实际分析的要求;本研究采用近红外光谱分析的方式实现了一种快速分析煤炭品质的新方法,可以替代基于热分析的传统化学分析方法,为工业在线分析煤炭品质论证了可行性.     

ADS注入器Ⅱ热冲击损伤研究(英文)

由于束流脉冲无法控制而引起直线加速器的热冲击损伤是造成加速器无法完成聚束及偏转的主要因素,而对热冲击进行定量的热应力评估可以有效地避免RFQ、超导腔以及其他加速元件等加速器设备的损伤,这在研制强流直线加速器的过程中至关重要。本研究引用一种新颖的计算方法定量分析整个注入器的热冲击损伤并明确了三种不同材料高纯铌、无氧铜和不锈钢对应的加速器件的热冲击的特征。基于有限元方法对瞬态热应力进行分析,得出三种不同材料对应的加速器件在入射角度为90度时的温度分析结果。对于所研制的注入能量低于10 MeV的强流直线加速器来讲,得到可允许的入射时间为20μs。     

Study on the frequency tuning of the half-wave resonator at IMP

The RF and mechanical coupled analyses are essential in superconducting cavity design in order to predict the deformation of the cavity walls and the frequency shift caused by the deformation. In this paper, the detuning caused by both bath helium pressure and Lorentz force is analysed and a tuning system has been investigated and designed to compensate the detuning by deforming the half-wave resonator along the beam axis. The simulations performed with ANSYS code show that the tuning system can adjust and compensate the frequency drift due to external vibrations and helium pressure fluctuation during operation.     

A particle-in-cell mode beam dynamics simulation of medium energy beam transport for the SSC-Linac

A new linear accelerator system, called the SSC-Linac injector, is being designed at HIRFL (the heavy ion research facility of Lanzhou). As part of the SSC-Linac, the medium energy beam transport (MEBT) consists of seven magnetic quadrupoles, a re-buncher and a diagnose box. The total length of this segment is about 1.75 m. The beam dynamics simulation in MEBT has been studied using the TRACK 3D particle-in-cell code, and the simulation result shows that the beam accelerated from the radio frequency quadrupole (RFQ) matches well with the acceptance of the following drift tube linac (DTL) in both the transverse and longitudinal phase spaces, and that most of the particles can be captured by the final sector focusing cyclotron for further acceleration. The longitudinal emittance of the RFQ and the longitudinal acceptance of the DTL was calculated in detail, and a multi-particle beam dynamics simulation from the ion source to the end of the DTL was done to verify the original design.     

Numerical optimization and multi-particle dynamics simulation of the radial matching section of the RFQ

The ABC code is an optimization program for the development of matching channels and dynamical matchers in radio frequency quadrupole (RFQ) structures, and a new approach to this code to define the geometry of the radial matching section of the RFQ has been developed. This approach is based on the application of the numerical optimization step by step. This optimization is intended to search for the initial matching condition of a beam, the optimization of parameters of a cell of the channel on given characteristic parameters and traces of a beam in linear channels in both forward and backward directions. To further verify the results of the optimization, multi-particle beam dynamics simulations have been carried out using the BEAMPATH and TRACK codes. The result of the beam dynamics simulation shows that the optimization result of the ABC code is reasonable and this approach provides an opportunity to redesign the structure of the radial matching section of the RFQ.     

Preliminary design and simulation of a 162.5 MHz high-intensity proton RFQ for an accelerator driven system

A new procedure for the design and simulation of a Radio Frequency Quadrupole (RFQ) accelerator has been developed at the Argonne National Laboratory. This procedure is integrated with the beam dynamics design code DESRFQ and the simulation code TRACK, which are based on three-dimensional field calculations and the particle-in-cell mode beam dynamics simulations. This procedure has been applied to the development of a 162.5 MHz CW RFQ which is capable of delivering a 10 mA proton beam for the Accelerator Driven System (ADS) of the CAS. The simulation results show that this RFQ structure is characterized by the stable values of the beam acceleration efficiency for both the zero current beam and space charge dominated beam. For an average beam current of 10 mA, there is no transverse rms emittance growth, the longitudinal rms emittance at the exit of RFQ is low enough and there is no halo formation. The beam accelerated in the RFQ could be accepted easily and smoothly by the following super-conducting linear accelerator.