γ干扰素免疫电极及其响应机理的研究

在醋纤维孔膜上利用溴化氰固定了马抗人γ干扰素抗体。抗体膜经竞争性温育反应后置于碘离子选择电极上而构成免疫电极; 另一碘电极与参比膜作为参比电极。测定了电极在0.1mmol.dm^-3KI+4.4mmol.dm^-3H2O2+0.1mol.dm^-3柠檬酸盐,PH5.0缓冲液中响应电位, 研究了温度反应时间、电解液组成等因对电极响应影响,提出了电极向应线性化方法, 并得到了实验验证。     

甘油快原子轰击质谱的量子化学研究

用标准MNDO方法优化了甘油快原子轰击正离子谱中的主要离子构型,计算了生成热、质子化能以及亚稳断裂的活化势垒,研究了质子化甘油二步脱水反应的机理,并指出脱水产物C_3H_5O~+离子存在2种不同的构型。     

主动冷却点阵夹层防热结构温度响应计算模型北大核心CSCD

针对点阵夹层结构主动热防护问题,建立了夹层结构面板和芯体导热与冷却剂对流耦合的非稳态传热理论模型,利用有限体积法离散控制方程并在MATLAB中进行了迭代求解.模型首次考虑了面板与夹芯杆之间的收缩热阻,并利用分离变量法得到了收缩热阻的近似解析解.基于单胞模型和周期性边界条件,模拟得到了模型所需的表面对流传热系数h_(b)和h_(fin).最后,选取多单胞计算工况进行数值模拟和理论模型对比,并讨论了收缩热阻对模型预测精度的影响.结果表明:理论模型能够准确预测夹层结构及内部流体的温度变化,理论与仿真之间的最大误差不超过1%;随着外加热流密度不断增大,忽略收缩热阻使得计算结果造成的误差不断增大;与数值模拟相比,理论模型可显著地减少计算时间并节省计算资源,尤其适用于非均匀、非稳态复杂热载荷下点阵夹层结构的温度响应计算.     

Impact Responses of Prismatic Lithium-Ion Battery Based on the Membrane Factor Method北大核心CSCD

Aimed at the internal short circuit problem due to large deformation of the prismatic lithium-ion battery cell under impact loadings, a simplified battery model was first established. Then the motion equations of velocity and displacement based on the membrane factor method were proposed. With the effects of the face-sheet thickness and the densification region on the normalized final deflection, impact response characteristics of prismatic battery cells were investigated in detail. The results show that, the improved motion equations involving the membrane factor can reflect the dynamic response mechanisms of the prismatic battery cell under impact loadings, and the large deflection under high-speed impact can be predicted. With the increase of the face-sheet thickness, the deflection of the battery cell’s lower part decreases obviously. However, the densification region expands with the face-sheet thickness. The deflection and the densification region of the cell’s lower part both increase with the inner core density of the battery. This proposed impact model provides a theoretical guidance for the multi-functional integrated dynamic design of prismatic battery cells. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

Microwave-assisted Preparation of Temperature Sensitive Poly（N-isopropylacrylamide） Hydrogel with Improved Responsive Properties

Poly(N-isopropylacrylamide) (PNIPAM) hydrogel, which is insoluble but shrinkable or swellable in aqueous media when temperature rises or drops across 33oC1,2, has been extensively studied due to its potential applications in the fields of controlled drug …     

多相高分子快离子导体阻抗谱的研究

研究了以ＬｉＣｌＯ４掺杂的聚乙二醇聚氨酯双离子导体及磺酸型聚乙二醇聚氨酯离聚物单一离子导体的阻抗谱，给出了多相快离子导体交流阻抗测试系统的等效电路．通过阻抗谱计算机解析，计算得出了样品的基本电学参数．通过讨论界面阻抗的色散现象，计算出样品的离子电导率，和阻抗谱解析法得到的结果相一致．     

高效除草剂快杀稗标准物质的制备及表征

从快杀稗工业品出发 ,经活性炭纯化、硅胶柱层析分离制得快杀稗标准物质 ,并进行熔点、高效液相色谱、紫外光谱、元素分析、红外光谱、质谱、核磁共振等方法的表征 ,以高效液相色谱法测得该标准品纯度在99%以上     

速响应的温敏性聚(N-异丙基丙烯酰胺)水凝胶Ⅰ.以CaCO3为成孔剂制备方法、表征及动力学研究

以不同粒径的CaCO3粒子为成孔剂,合成了快速响应的温敏性聚(N-异丙基丙烯酰胺)(PNIPA)水凝胶.利用扫描电镜观察到水凝胶具有特殊的孔状结构,得到水凝胶的孔径大小为几十微米左右.动力学研究表明,该水凝胶在温敏膨胀或收缩时,具有快速的响应速率,在10 min内的失水率可达90%.比较了干凝胶和40℃下失水后的凝胶两种不同状态下水凝胶的膨胀曲线,发现两者的溶胀动力学曲线明显不同,前者的曲线有拐点.同时发现与失水收缩速率相比,水凝胶具有较慢的吸水膨胀速率.     

智能性水凝胶

“智能”材料具有传感、处理和执行功能，水凝胶作为智能材料其应用前景良好。本文综述了智能水凝胶的近期研究发展，以Ｆｌｏｒｙ的溶胀理论着重探讨了刺激响应性，并介绍了化学机械现象及凝胶相转变。     

微波固相法合成钠快离子导体Na5YSi4O12

应用微波方法合固相反应难于制备的Ｎａ５ＹＳｉ４Ｏ１２纯相，讨论了微波合成条件对产物的影响，与溶胶－凝胶法相比，微波法反应速率快，选择性强，合成的样品具有特异的聚集态，缺陷和微结构，从而导致离子导电活化能下降。