水凝胶及其在药物控释体系上的应用

智能水凝胶作为药物载体有着良好的应用前景。人体环境中存在一些变化的因素，如温度、pH。因此，温度敏感性水凝胶和pH敏感性水凝胶可用于药物在人体中的控释体系。本文主要介绍水凝胶材料的种类以及智能水凝胶在药物控释体系上的应用。     

智能响应型水凝胶药物控释体系及其应用

药物控释体系可改善药物分子在机体内的释放、吸收、代谢和排泄过程,显著提高药物利用率并减弱药物的毒副作用。智能响应型水凝胶凭借其刺激响应性、亲水性和无毒性在药物控释方面得到了广泛的关注。本文介绍了智能响应型水凝胶药物控释体系的概念、机理和应用,详细归纳了智能响应型水凝胶药物控释体系的研究进展。按照刺激源不同将智能响应型水凝胶药物控释体系分为pH响应型、温度响应型、光响应型、生物分子(如葡萄糖、酶)响应型、外场(如电场、磁场)响应型、压力响应型、氧化还原响应型及多重响应型水凝胶药物控释体系。进一步介绍了智能响应型水凝胶药物控释体系在治疗癌症、急性肾损伤、眼病、糖尿病等疾病及抗菌、防止伤口感染等方面的应用。最后,基于目前智能响应型水凝胶药物控释体系存在的一些问题(如生物相容性差、存在突释或滞释现象、不可降解等)对其发展做出了展望。     

智能水凝胶研究最新进展

综述了近几年国内外智能水凝胶研究现状,重点介绍了对pH、温度、光、电、磁和特定生物分子敏感的水凝胶的研究创新以及智能水凝胶在药物控释载体、组织工程支架、血红蛋白氧栽体、生物传感器、蛋白质检验等生物医学领域应用的最新进展.     

基于低分子量凝胶因子的超分子水凝胶：从结构到功能*

基于低分子量凝胶因子的超分子水凝胶由于其良好的刺激相应性及生物相容性,在智能凝胶、组织工程等方面有广泛的应用前景。而凝胶因子的设计制备与凝胶机理的研究已成为其发展的关键,本文在介绍超分子凝胶的基本概念的基础上,综述了超分子水凝胶近期的研究进展,主要介绍了凝胶因子的种类及超分子水凝胶的应用,并对超分子凝胶领域的国内外研究现状及前景进行了评述。     

金纳米棒基智能复合纳米水凝胶的研究进展

金纳米棒(AuNRs)基智能复合纳米水凝胶是一类结合了AuNRs和智能纳米水凝胶两者独特性能的智能纳米材料,其最大特点是可通过外界刺激来调节AuNRs的多种性能,或通过测定其性能变化来感知外界刺激。本文首先介绍了目前文献报道的核壳结构型、无规充填型、草莓型三种形态结构的AuNRs基智能复合纳米水凝胶的特点及其合成方法。然后,总结了金纳米棒基智能复合纳米水凝胶的性能与应用研究进展。最后,对其未来的研究方向和发展前景作出了展望。     

智能型水凝胶

智能型水凝胶是一类具有广泛应用前景的功能高分子材料，但由于传统水凝胶存在一些缺点因而限制了其应用，因此近年来围绕提高传统水凝胶的性能做了大量研究工作。本文从四个主要方面综述了近年来智能型水凝胶改性的研究进展。     

智能纳米水凝胶的刺激响应性研究进展

智能纳米水凝胶在药物输送与可控释放、医学诊断、生物传感器、微反应器、催化剂载体等方面有良好的应用前景。结合本课题组近年来的研究成果,分别介绍了具有温度刺激响应性、pH刺激响应性、光刺激响应性、磁场刺激响应性、分子识别刺激响应性和多重刺激响应性智能纳米水凝胶的研究进展。另外,对这几种智能纳米水凝胶目前存在的问题和今后的发展方向提出了一些粗浅的看法。     

基于水凝胶的细菌传感检测

水凝胶具有含水量高、柔韧性好、黏弹性高、生物相容性高以及独特的刺激响应特性,这使得水凝胶材料在细菌传感检测方面备受关注。基于水凝胶的细菌传感器及传感芯片的研究,对细菌的基础科学研究具有重要意义,更对细菌的快速高效检测、特定环境中的细菌污染防控和疾病传播控制等具有重要应用价值。本文针对近年来水凝胶在细菌传感检测方面的研究工作进行综述。简要介绍了水凝胶的种类,水凝胶与细菌之间相互作用的影响因素。重点综述了基于温敏型水凝胶、pH敏感型水凝胶、酶敏感型水凝胶以及特异性标识物功能化修饰的水凝胶构建的传感器和传感检测方法,并综述了基于水凝胶的新型柔性传感器和微流控传感芯片的研究进展。基于水凝胶的细菌传感器在检测效率、信号采集和稳定性等方面仍需进一步提升和拓展。随着新型水凝胶材料的出现,智能细菌传感器、柔性细菌传感器和集成微流控细菌传感芯片是目前发展的方向,在细菌检测方面显示出良好的发掘潜力和应用前景。     

水凝胶功能改性研究与应用进展

水凝胶是一种三维网状亲水性高分子软材料,具有良好的固体力学和液体热力学性能,其自身柔软、可塑性强、生物相容性好,具有可降解性和刺激性响应特征。但传统方法制备的水凝胶有诸多缺陷,如有毒性、生物活性低、机械性能差等,使得其应用受限。本文综述了近10年来功能水凝胶制备与改性的主要研究进展及其应用现状,以多吸收位点和高机械强度等性能为主,重点阐述了国内外功能性水凝胶的最新制备方法,包括物理改性中的低分子复合材料交联与构建多重网络和化学改性中的接枝共聚等。详细介绍了该类功能材料在医药、生物、农业和食品等方面的应用现状与发展前景,特别关注了高效短时对外界环境微小变化具有响性的智能印迹水凝胶及其在检测领域的应用,为水凝胶的进一步开发和推广应用提供参考。     

氧化石墨烯/聚合物复合水凝胶的研究进展

氧化石墨烯是一种具有单原子厚度的二维材料, 具有优异的力学性能和良好的水分散性, 其表面有大量的含氧官能团. 将氧化石墨烯引入水凝胶体系中可以提高水凝胶的机械性能, 丰富其刺激响应的类型. 目前, 氧化石墨烯水凝胶在高强度、 吸附、 自愈合及智能材料等很多领域均有出色的表现. 氧化石墨烯水凝胶的研究已有10年的历史. 本文总结了氧化石墨烯水凝胶的制备方法, 归纳了智能氧化石墨烯水凝胶在光热响应、 pH响应和自愈合3个方面的响应机理和研究进展, 并综合评述了其在高强度水凝胶、 生物医学、 智能材料和污水处理等方面的应用前景.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.