Determination of traces of cobalt in the presence of nioxime and cetyltrimethylammonium bromide by adsorptive stripping voltammetry

A sensitive method of Co(II) determination by adsorptive stripping voltammetry is presented. The method exploits the enhancement of cobalt peak current observed in the system Co(II)-nioxime-cetyltrimethylammonium bromide-piperazine-N,N′-bis(2-ethanesulfonic acid). The calibration plot for an accumulation time of 60 s is linear from 5 × 10⁻¹¹ to 3 × 10⁻⁹ mol L⁻¹. The relative standard deviation is 3.8% for Co(II) determination at concentration 1 × 10⁻⁹ mol L⁻¹. The detection limit is 1.7 × 10⁻¹¹ mol L⁻¹. The validation of the method is performed by the analyses of certified reference materials and comparing the result of Co(II) determination in river water sample by the proposed method with those obtained by ET AAS. The main advantage of this new system is the micro-trace Co(II) determination by adsorptive stripping voltammetry, as compared to those described before, a low concentration of the supporting electrolyte used, and so commercially available reagents without additional purification can be used.     

Lewis碱性混合萃取剂碱度的测定

提出一种利用萃取法间接测定Lewis碱性萃取剂碱度的简便方法, 选择常用的Lewis碱性萃取剂TOA/正辛醇和TRPO/煤油, 测定了其碱度, 为今后络合萃取剂的选择及其机理的研究提供理论指导.     

测定亚硝酸根的表面活性剂增敏催化动力学光度法

基于在稀硫酸介质中溴化十六烷基三甲基铵对ＮＯ２－催化溴酸钾氧化曙红褪色反应的作用，建立了测定ＮＯ－２的表面活性剂增敏催化动力学光度法。加入十六烷基三甲基溴化铵（ＣＴＭＡＢ）后体系最大吸收波长由４８０ｎｍ红移至５４０ｎｍ，ΔＡ增大约２０倍。ΔＡ与ＮＯ－２含量在００１～０２ｍｇ／Ｌ范围内存在线性关系，检出限为０００４ｍｇ／Ｌ。方法已用于水样中ＮＯ－２测定，结果满意     

甲壳素色谱柱富集—快速吸光光度法测定环境试样中痕量铁

研究了甲壳素色谱柱富集Fe(Ⅱ)-磺基水杨酸-十八烷基二甲基氨基乙酸的红紫色缔合物,用磺基水杨酸洗脱后,在分光光度计上直接测定洗脱液的吸光度,方法快速,简单、富集倍数高,用于环境水样中痕量铁的测定,结果令人满意。     

维生素C在多壁碳纳米管/壳聚糖复合膜修饰玻碳电极上的电化学行为及测定

研究了维生素C在多壁碳纳米管/壳聚糖复合膜修饰玻碳电极上的电化学行为及测定。实验结果表明,在0.2 mol/L PBS(pH6.0)缓冲溶液中,修饰电极对抗坏血酸的氧化具有明显的催化和增敏效应,其氧化峰电位由 0.5 V负移至 0.1 V(vs.AgCl/Ag)。对修饰剂碳纳米管的用量、支持电解质、富集电位和富集时间等进行了优化。采用半微分伏安法进行定量测定,其线性范围为4.0×10-6~2.0×10-3mol/L,r=-0.998 3,检出限为1.0μmol/L。对抗坏血酸在修饰电极上的电化学行为进行了探讨,其电极反应为具有吸附特性和不可逆的电极过程,测得参加反应的质子数为2,电极反应的电子转移系数为0.59。测定了维生素C药片中抗坏血酸的含量,回收率在93%~105%。     

Design of two-dimensional biomimetic uranyl optrode and its application to the analysis of natural waters

A two-dimensional biomimetic optrode for the detection and quantification of uranium in natural waters was fabricated. The sensing element was designed by the inclusion of uranyl ion imprinted polymer particles into polymethyl methacrylate followed by casting a thin film on a glass slide without any plasticizer. The ion imprinted polymer material was prepared via covalent immobilization of the newly synthesised ligand 4-vinyl phenylazo-2-naphthol by thermal polymerization. Operational parameters such as pH, response time and the amount of sensing material were optimized. The response characteristics of the imprinted and the corresponding non-imprinted polymer inclusion optrodes of uranium were compared under optimum conditions. The imprinted polymer inclusion optrode responds linearly to uranium in the concentration range 0–1.0 μg mL⁻¹ with a detection limit of 0.18 μg mL⁻¹, which is much better than the solution studies using 4-vinyl phenylazo-2-naphthol (1.5 μg mL⁻¹). Triplicate determinations of 100 μg of uranium(VI) present in 250 mL of solution gave a mean absorbance of 0.018 with a relative standard deviation of 8.33%. The superior sensitivity of imprinted polymer inclusion optrode is exemplified by lower detection limits and broader dynamic range over non-imprinted polymer inclusion optrode. The developed imprinted polymer inclusion optrode was found to give stable and precise response for 3 months and can be used without any loss in sensitivity. The applicability for analysing ground, lake and tap-water samples collected in the vicinity of uranium deposits was successfully demonstrated.     

The use of a polymer inclusion membrane in flow injection analysis for the on-line separation and determination of zinc

This paper reports the first use of a polymer inclusion membrane (PIM) for on-line separation in flow injection analysis (FIA) involving simultaneous extraction and back-extraction. The FIA system containing the PIM separation module was used for the determination of Zn(II) in aqueous samples in the presence of Mg(II), Ca(II), Cd(II), Co(II), Ni(II), Cu(II), and Fe(III). The Fe(III) and Cu(II) interferences were eliminated by off-line precipitation with phosphate and on-line complexation with chloride, respectively. The concentration of Zn(II) was determined spectrophotometrically using 4-(2-pyridylazo) resorcinol (PAR). The optimal composition of the PIM consisted of 40% (m/m) di(2-ethlyhexyl) phosphoric acid (D2EHPA) as carrier, 10% (m/m) dioctyl phthalate (DOP) as plasticizer and 50% (m/m) poly(vinyl chloride) (PVC) as the base polymer. The optimized FIA system was characterized by a linear calibration curve in the range from 1.0 to 30.0 mg L⁻¹ Zn(II), a detection limit of 0.05 mg L⁻¹ and a relative standard deviation of 3.4% with a sampling rate of 4 h⁻¹. Reproducible results were obtained for 20 replicate injections over a 5 h period which demonstrated a good membrane stability. The FIA system was applied to the determination of Zn(II) in pharmaceuticals and samples from the galvanizing industry and very good agreement with atomic absorption spectrometry was obtained.     

Indirect simultaneous kinetic determination of semicarbazide and hydrazine in micellar media by H-point standard addition method

H-point standard addition method (HPSAM) is suggested as a simple and selective method for the determination of semicarbazide and hydrazine. The reduction of Cu²⁺ to Cu⁺ by semicarbazide and hydrazine in the presence of neocuproine (Nc) and the subsequent complex formation between Cu⁺ and Nc produced a sensitive spectrophotometric method for indirect determination of semicarbazide and hydrazine. The difference in the rate of reduction of Cu²⁺ with semicarbazide and hydrazine in cationic micellar media is the basis of this method. Semicarbazide can be determined in the range of 0.5-3.75 μg ml⁻¹ with satisfactory accuracy and precision in the presence of excess hydrazine. The proposed method was successfully applied to the simultaneous determination of semicarbazide (0.5-3.75 μg ml⁻¹) and hydrazine (0.5-5 μg ml⁻¹) and also to the selective determination of semicarbazide in the presence of hydrazine in several synthetic mixtures containing different concentration ratios of semicarbazide and hydrazine.     

催化动力学荧光光度法测定痕量铜

在氨性介质中，铜对H2O2氧化次甲基蓝褪色反应有强烈催化作用。研究发现，次甲基蓝的氧化产物在紫外线照射下发出强荧光，据此建立一种测定痕量铜的催化动力学荧光光度法。本法检出限达0．02ng／mL，铜的质量浓度在0～6ng／mL范围内与相对荧光强度（△F）有良好线性关系。     

Kinetic Determination of Microquantities of Rutin by Perturbation of the Bray-Liebhafsky Oscillatory Reaction in an Open System

A kinetic method is described for the microquantitative (microconcentration/microvolume) determination of rutin based on potentiometric monitoring of the concentration perturbations of the Bray-Liebhafsky (BL) oscillatory reaction being in a non-equilibrium stationary state close to a bifurcation point. The experiments are carried out in an open reactor. The response of the matrix system to perturbations by different concentrations of rutin ethanolic solutions is followed by a Pt-electrode. In the concentration range between 7.8×10^–8moldm^–3 and 9.1×10^–6mol dm^–3, we found a linear dependence of the maximal potential shift, E_m, on the logarithm of the rutin concentrations. The unknown concentrations can be determined from the calibration curve up to an accuracy of ±5%. The detection limit is 3.6×10^–8mol dm^–3. The amount of required sample can be as small as 10µL.