碳纳米管-TiO_2修饰电极伏安法测定维生素K_3

利用碳纳米管、二氧化钛两种纳米材料制成碳纳米管-TiO2复合膜修饰电极,进行了维生素K3电化学行为的研究。维生素K3在碳纳米管-TiO2复合膜修饰电极的电化学响应优于碳纳米管修饰电极,表明前者具有更好的催化作用。通过条件实验的优化,结果表明维生素K3在pH=9.42的氨水-NH4Cl底液中,富集时间为10s,富集电位于-0.60V,扫描速度为0.1V/s时有稳定的灵敏的氧化还原峰。峰电流与维生素K3浓度在3.0×10-6～8.0×10-5mol/L范围内呈良好的线性关系,检出限为5.0×10-7 mol/L。考查了修饰电极的重现性,5次平行测量的RSD为1.78%。该方法用于片剂药品中维生素K3含量的测定,回收率在97.5%～102%之间。     

多巴胺和抗坏血酸在十六烷基三甲基溴化铵/碳纳米管电极上的检测

研究了十六烷基三甲基溴化铵(CTMAB)/多壁碳纳米管修饰玻碳电极的制备以及多巴胺和抗坏血酸在该修饰电极上的电化学行为。在CTMAB和多壁碳纳米管的协同作用下,该修饰电极对多巴胺和抗坏血酸均具有显著的催化氧化作用,多巴胺和抗坏血酸的氧化峰电位分别为223mV和15mV,实现了在抗坏血酸共存时测定多巴胺。在pH7.0的磷酸盐缓冲溶液中,多巴胺和抗坏血酸的线性范围分别为2.0×10-6～2.0×10-3mol/L和4.0×10-5～1.0×10-2mol/L,检出限分别为6.0×10-7mol/L和1.0×10-5mol/L。     

β环糊精-碳纳米管/壳聚糖自组装膜修饰电极在过量抗坏血酸存在下测定多巴胺

基于β环糊精和碳纳米管可通过范德华力形成复合物, 利用壳聚糖分子以静电引力吸附富集碳纳米管-β环糊精, 采用层层自组装制备了β环糊精-碳纳米管/壳聚糖玻碳修饰电极, 并研究了多巴胺在修饰电极上的电化学行为. 在抗坏血酸和多巴胺共存体系中, 二者的氧化峰电位相差约163 mV, 据此建立了多巴胺的电化学选择性测定, 峰电流与浓度在1.0×10-6～7.0×10-5 mol/L 范围内呈良好的线性关系, 检出限为0.3 μmol/L.     

银掺杂聚L-酪氨酸修饰电极同时测定多巴胺、肾上腺素和抗坏血酸

用循环伏安法制备银掺杂聚L-酪氨酸修饰玻碳电极,研究了多巴胺、肾上腺素和抗坏血酸在其电极上的电化学行为,建立了同时测定多巴胺、肾上腺素和抗坏血酸的新方法。当3种组分共存时,在磷酸盐缓冲溶液(pH6.0)中,扫描速率为140mV/s,多巴胺和肾上腺素在修饰电极上分别产生还原峰,峰电位分别为0.198和-0.205V,多巴胺和肾上腺素氧化峰重叠,峰电位为0.313V(vs.Ag/AgCl);抗坏血酸产生一个氧化峰,峰电位0.108V(vs.Ag/AgCl)。多巴胺和肾上腺素的ΔEpc=0.403V,抗坏血酸的氧化峰与多巴胺和肾上腺素的ΔEpa=0.205V,用还原峰和氧化峰可同时测定多巴胺、肾上腺素和抗坏血酸,3种组分同时测定的线性范围分别为5.0×10-6～1.0×10-4mol/L,8.0×10-6～1.0×10-4mol/L和3.0×10-5～1.0×10-3mol/L;检出限分别为5.0×10-7,8.0×10-7和5.0×10-6mol/L。本方法用于人尿液中多巴胺、肾上腺素和抗坏血酸的同时测定,结果满意。     

抗坏血酸在石墨烯/聚苯胺复合膜修饰电极上的电化学行为

通过原位聚合的方法制备石墨烯/聚苯胺复合物,并将其滴涂于玻碳电极表面,得到石墨烯/聚苯胺复合膜修饰电极。采用循环伏安法研究了抗坏血酸在石墨烯/聚苯胺复合膜修饰电极上的电化学行为。结果表明,在pH=3.0的磷酸盐缓冲溶液中,抗坏血酸在该修饰电极上出现一个明显的氧化峰,氧化峰电流与其浓度在5.0×10-7~1.0×10-3 mol/L范围内呈良好的线性关系,检出限为1.9×10-7 mol/L。该修饰电极可以用于维生素C片中痕量抗坏血酸的测定,加标回收率为97.5%~105%。     

聚磺基水杨酸/碳纳米管修饰电极在抗坏血酸共存时测定多巴胺

研究了聚磺基水杨酸/多壁碳纳米管修饰玻碳电极的制备及多巴胺在此修饰电极上的电化学行为, 讨论了修饰条件、扫速、溶液 pH 以及抗坏血酸的干扰对多巴胺在这种复合物电极上响应的影响. 在 pH 7.4 磷酸盐缓冲溶液中, 在1.0×10-3 mol/L 抗坏血酸共存的条件下, 多巴胺氧化峰电流与其浓度在 5×10-7～10-4 mol/L 范围内分段呈线性关系, 检出限为 1.0×10-7 mol/L. 结果表明: 聚磺基水杨酸/多壁碳纳米管修饰电极结合了多壁碳纳米管灵敏度高和聚磺基水杨酸选择性好的优点, 可用于抗坏血酸共存条件下多巴胺的测定.     

水合肼在多壁碳纳米管修饰电极上的电化学行为及测定

报道了水合肼在碳纳米管修饰电极上的电化学行为以及水合肼测定的新方法。与裸玻碳电极相比,多壁碳纳米管修饰玻碳电极使水合肼的氧化峰电流显著提高,同时氧化过电位降低,测定灵敏度大为提高。优化了底液、pH、修饰剂量等测定条件。在最佳条件下,该修饰电极测定水合肼的线性范围为2.9×10-8~9.8×10-4mol/L,线性相关系数为-0.9945,检出限为1.0×10-9mol/L。对1.0×10-4mol/L的水合肼平行测定10次的相对标准偏差为4.4%。此方法已用于模拟水样中水合肼的测定。     

聚L-精氨酸修饰电极存在下同时测定多巴胺和肾上腺素

用循环伏安法制备了聚L-精氨酸修饰玻碳电极,研究了多巴胺和肾上腺素在修饰电极上的电化学行为,建立了同时测定多巴胺和肾上腺素的新方法。在pH7.5的磷酸盐缓冲溶液中,多巴胺在修饰电极上产生一对氧化还原峰,峰电位分别为0.276V和0.059V;肾上腺素在修饰电极上产生3个氧化峰和一个还原峰,峰电位分别为0.262V、0.121V、-0.126V和-0.316V(对Ag/AgCl电极)。多巴胺和肾上腺素同时存在时ΔEpc=375mV,用还原峰对多巴胺和肾上腺素同时测定的线性范围分别为8.0×10-7~5.0×10-4mol/L和5.0×10-7~5.0×10-5mol/L;检出限分别为3.0×10-7mol/L和1.0×10-7mol/L。大量的抗坏血酸和尿酸不干扰测定,用于人尿液中多巴胺和肾上腺素样品的同时测定,结果满意。     

吡硫醇在单壁碳纳米管修饰电极上电化学行为的研究

研究了吡硫醇在单壁碳纳米管修饰电极上的电化学行为,提出了一种检测吡硫醇的电化学方法.在0.1 mol/L的NaAc-HAc(pH 4.0)缓冲溶液中,吡硫醇在单壁碳纳米管修饰电极上出现一灵敏的氧化峰,峰电位位于0094 V处.与裸玻碳电极相比,单壁碳纳米管修饰电极显著提高了吡硫醇的氧化峰电流.在最佳实验条件下,吡硫醇浓度在9.9×10~(-6)～5.7×10~(-4) mol/L范围内与峰电流呈良好的线性关系,检出限为2.98×10~(-7) mol/L.吡硫醇在单壁碳纳米管修饰电极上的氧化过程受吸附控制,为1电子2质子的过程.     

抗坏血酸在石墨烯微片修饰玻碳电极上的电化学行为及其测定

基于石墨烯微片修饰玻碳电极对抗坏血酸的电催化作用,建立了测定抗坏血酸的电化学分析方法。石墨烯微片修饰玻碳电极与裸玻碳电极相比,显著提高了抗坏血酸的氧化峰电流,降低了氧化峰电位,提高了测定的灵敏度。该电极测定抗坏血酸的线性范围为5.0×10-5～2.5×10-2mol/L,最低检测限为6.5×10-7mol/L(信噪比=3)。     

The Colloidal Stabilization of Carbon with Carbon: Carbon Nanobubbles as both Dispersant and Glue for Carbon Nanotubes

The superior physical properties of carbon nanotubes (CNTs) have led to their broad application. Intrinsically, CNTs tend to agglomerate from hydrophobic interactions, which is highly undesirable for solution processing and device fabrication. Commonly, a stabilizer consisting of organic surfactants or polymers is used to disperse CNTs. Recently, we synthesized nitrogen‐doped carbon hollow nanospheres (25–90 nm), termed carbon “nanobubbles”. They bear superior dispersability in water and distinctive graphitic order. Herein, we describe the nanobubble‐assisted dispersion of CNTs in aqueous solution upon sonication. This process relies on the π–π interaction between the two aromatic carbon nanostructures, which can process their carbon mixture in water into conductive filter membranes, ink, and discs. This stabilization can be extended to other aromatic carbons. In addition, the π–π interaction may create a new type of carbon p–n junction that can be used to improve charge separation.     

Adsorption of Carbon Dioxide on Activated Carbon

The adsorption of CO2 on a raw activated carbon A and three modified activated carbon samples B, C, and D at temperatures ranging from 303 to 333 K and the thermodynamics of adsorption have been investigated using a vacuum adsorption apparatus in order to obtain more information about the effect of CO2 on removal of organic sulfur-containing compounds in industrial gases. The active ingredients impregnated in the carbon samples show significant influence on the adsorption for CO2 and its volumes adsorbed on modified carbon samples B, C, and D are all larger than that on the raw carbon sample A. On the other hand, the physical parameters such as surface area, pore volume, and micropore volume of carbon samples show no influence on the adsorbed amount of CO2. The Dubinin-Radushkevich (D-R) equation was the best model for fitting the adsorption data on carbon samples A and B, while the Preundlich equation was the best fit for the adsorption on carbon samples C and D. The isosteric heats of adsorption on carbon samples A, B, C, and D derived from the adsorption isotherms using the Clapeyron equation decreased slightly increasing surface loading. The heat of adsorption lay between 10.5 and 28.4 kJ/mol, with the carbon sample D having the highest value at all surface coverages that were studied. The observed entropy change associated with the adsorption for the carbon samples A, B, and C (above the surface coverage of 7 ml/g) was lower than the theoretical value for mobile adsorption. However, it was higher than the theoretical value for mobile adsorption but lower than the theoretical value for localized adsorption for carbon sample D.     

一维新型碳的同素异形体:碳链

碳链是一种完全一维的、具有电子轨道sp杂化结构的新型碳的同素异形体。正是由于碳链的独特的一维结构,使其拥有区别于富勒烯、石墨烯和碳纳米管的化学键,从而表现出更加优异的性能,如:理论预言碳链的机械强度是石墨烯的几倍;碳链的导热也类似于石墨烯和碳纳米管;碳链是具有直接带隙的半导体材料,且带隙的大小可以通过其长度来调控,其长度越长,带隙越小。尽管关于碳链的研究早在19世纪已经启其端绪,但是一直进展缓慢。直到近期,关于碳链的研究才有了几次突破性的进展,引起了学术界的广泛讨论。本文介绍了碳链的概念、结构和特殊的物理性质,在此基础上进一步介绍了碳链的几种典型的合成方法以及应用前景,重点阐述了近期碳链研究上的几次重大突破,并对于碳链研究的未来进行了展望,希望能引起国内外同行的关注。     

Growth of Single-walled Carbon Nanotubes on Substrates Using Carbon Monoxide as Carbon Source

The growth of single-walled carbon nanotubes(SWCNTs) on substrates has attracted great interests because of the potential applications in various fields. Carbon monoxide(CO) was used as the carbon source for the growth of SWCNTs on silicon substrates. Random or oriented SWCNTs can be produced by varying the CO flow rate. When the flow rate of CO was as low as 20 sccm(sccm:standard cubic centimeter per minute), dense SWCNT networks with clean surface were produced. When the flow rate was above 50 sccm, vertically aligned SWCNT(VA-SWCNT) arrays were grown. Well-aligned VA-SWCNT arrays were obtained in the temperature range of 650-800℃ and the content of large-diameter(above 1.7 nm) tubes in the array increased with the temperature. The height of the array was affected by the growth temperature, the CO flow rate, and the growth time. These findings indicate CO can be used as an efficient carbon source for the growth of SWCNTs on substrates under low flow rates.     

埃洛石纳米管模板法一步法制备一维碳纳米管/碳纳米棒混合纳米碳材料

利用埃洛石纳米管(HNTs)特有的中空纳米结构,以及丰富的界面化学性质,以聚乙烯醇(PVA)为碳源,采用浸渍填充纳米孔方法实现了一步制备一维碳纳米管(CNTs)/碳纳米棒(CNRs)混合纳米碳材料。考察模板剂(HNTs)和碳源(PVA)之间的比例关系对混合纳米碳材料的结构影响,利用XRD、FTIR、Raman、N2吸附-脱附测试、TEM、SEM以及电阻率和分散性等表征手段分析混合纳米碳材料的结构变化。结果发现,PVA填充含量的增加将导致产物中CNRs的质量分数增加;当PVA和HNTs质量之比为1∶1时,所制备的CNTs/CNRs的孔体积达到最大值2.142 cm~3·g-1,比表面积达到583 m~2·g-1,并且表现出较好的电导率和分散性,表明低的PVA填充比例制备的混合碳材料中CNTs含量较高。     

二氧化碳与低碳经济发展

由于二氧化碳无色无味,又存在于大气中,因此它在植物生长中的重要性被人类忽略了。其实二氧化碳是光合作用的反应物,是植物生长的重要原料;又是一种新型绿色肥料。人类应该着力开发以二氧化碳为原料的新型肥料发展低碳经济。     

Ni/γ-Al2O3催化剂上CH4-CO2重整体系中积碳-消碳的研究

用动态热重技术和色谱技术联用以及XRD和TEM等表征手段,研究了Ni/γ-Al     

Carbon clusters

Some of the most significant discoveries and achievements concerning the mass spectra and gas phase ion chemistry of carbon clusters are reviewed. These include (1) nanosecond and femtosecond laser ionizations; (2) ion structures through ion/molecule reactions, ion chromatography, and computational methods; (3) carbon cluster cooling through radiative decay, dissociative decay, and thermionic emission; (4) mechanisms and energetics of fragmentation reactions; (5) endohedral fullerenes including recent data on ion beam implantation, and (6) ion chemistry as a function of the fullerene charge state.     

Palladium-Catalyzed Addition of Carbon Monoxide and Carbon Tetrachloride to 1-Octene in Supercritical Carbon Dioxide

The Pd-catalyzed addition of carbon monoxide and carbon tetrachloride to 1-octene gave coadduct [alkyl 2-( 2, 2, 2-trichloroethyl)octanoate] as the major product in supercritical carbon dioxide by using pyridine as the base. It was found that the selectivity and the yield of coadduct were greatly affected by the pressure of carbon dioxide, the reaction temperature and the amounts of alcohol and base used.     

碳纳米管含量对炭炭复合材料组织及力学性能的影响

炭纤维上原位合成了均匀生长且具有伸张形貌的碳纳米管,借助化学气相渗透制备了碳纳米管增强的炭炭复合材料,研究了不同含量的碳纳米管对炭炭复合材料组织和力学性能的影响。结果表明：炭纤维上生长碳纳米管改变了热解炭的沉积行为,诱导了各向同性热解炭的生成,且随着碳纳米管含量的增加,各向同性热解炭的厚度增加,但是复合材料的d002值却明显降低。微量的碳纳米管即可显著提高复合材料的力学强度,随着其含量的增加,复合材料的力学强度和模量迅速提高,但材料的断裂行为却急剧恶化,断裂模式由最初的假塑性断裂转变为脆性断裂。