天然产物生物合成:探索大自然合成次生代谢产物的奥秘

天然产物(次生代谢产物)是大自然馈赠给人类的礼物,由于其复杂的骨架结构和良好的药用价值,吸引着化学家们对其进行结构鉴定以及化学合成。尽管人们在天然产物全合成中取得了巨大的成就,但仍然面临着合成路线长、产率低、缺乏选择性等问题。大自然是最伟大的化学家,它利用酶作为催化剂,往往能够高效地合成天然产物。在基因水平上探索大自然合成复杂多样的天然产物的奥秘不仅有助于人们进一步理解和认知有机化学,还为人们开发和利用大自然高效催化化学反应的工具——酶奠定了基础。     

分散固相萃取-液相色谱-串联质谱法测定蜂蜜中新型烟碱类杀虫剂及其代谢物的残留量

称取蜂蜜样品2.00g至具塞离心管中,加入100μL同位素内标溶液(200μg·L~(-1))和10mL水,涡旋混匀,加入甲醇至20mL,涡旋混匀,以8 500转·min~(-1)离心5min,移取上清液0.50mL,用甲醇定容至10.0mL,涡旋混匀后,以8 500转·min~(-1)离心5min,取1.0mL上清液转移至具塞离心管中(内含混合均匀的吸附剂:30mg N-丙基乙二胺、15mg C_(18)粉末和50mg无水MgSO_4),涡旋混匀进行吸附净化,以8 500转·min~(-1)离心5min,转移全部上清液,于40℃下用氮气吹至近干,用甲醇-0.15%(体积分数,下同)甲酸溶液(1+9)混合液溶解残渣并定容至1.0mL,过0.22μm滤膜后供液相色谱-串联质谱分析。采用Agilent Eclipse XDB-C_(18)色谱柱进行分离,以不同比例的含5mmol·L~(-1)乙酸铵的0.15%甲酸溶液和甲醇为流动相进行梯度洗脱。质谱中采用电喷雾离子源正离子扫描方式和多反应监测模式,采用同位素内标法和外标法进行定量。吡蚜酮、呋虫胺、烯啶虫胺、噻虫嗪、氟啶虫酰胺、吡虫啉、噻虫胺、氯噻啉、啶虫脒、噻虫啉、4-(三氟甲基)烟酰胺和N-去甲基啶虫脒的质量浓度在一定范围内呈线性,测定下限(10S/N)在2.5～12.5μg·kg~(-1)之间。对空白蜂蜜样品进行加标回收试验,回收率在79.9%～108%之间,测定值的相对标准偏差(n=6)在1.7%～15%之间。     

三亚鹿回头海域珊瑚、石莼和碎石反射率光谱分析

以南海三亚湾鹿回头海域八种常见造礁石珊瑚优势种的反射率光谱为代表,用光谱仪测量它们和此海域常见底质石莼以及碎石的反射率光谱。通过反射率、导数光谱法研究了三亚鹿回头海域造礁石珊瑚、石莼和碎石的光谱差异。石莼于561.4 nm处出现反射率高达48%左右的显著波峰,在500～700 nm波长范围和造礁石珊瑚反射率差异较大;碎石反射率明显高于造礁石珊瑚反射率,整体差异显著。导数分析结果表明造礁石珊瑚、石莼和碎石可区分波段为：造礁石珊瑚与石莼主要为一阶导数在485～487,505～510,515～529,559～578,587～593,598～603和667～670 nm等波段。二阶导数在494.4～505.7,524～534.5,543.6～561.4和567.2～579.7 nm波段。四阶导数在515.8～430,621～627.1,628.8～635.6,639.3～645,661.8～669.8和678.4～682.4 nm等波段。造礁石珊瑚与碎石一阶导数反射光谱,主要为400～413.7,414～418,484.8～486.9,506～509.6,514.5～528.9,576.9～587.6和602.7～653.4 nm波段。二阶导数主要为,451.6～461.6,564.5～570.7和677～685 nm。四阶导数主要为,412.6～425.3,459.8～467,467.7～470.6,535.6～540.8,583.8～591.4,654.4～659.8和670.8～680 nm等波段。     

碱金属氟化物对掺Yb~(3+)氟磷酸盐玻璃析晶稳定性和光谱性质的影响

研究了碱金属氟化物对掺Yb3 氟磷玻璃的光谱性质和析晶稳定性能的影响.运用倒易法计算了Yb3 的发射截面.结果显示,LiF的引入对吸收和发射截面的提高作用较大并出现最佳引入量极值,其次为KF.碱金属氟化物的引入可提高二元体系的析晶稳定性能,使玻璃网络结构得到改善;拉曼光谱显示二元体系中引入YbF<,3>后玻璃网络结构得到增强,而在引入碱金属氟化物的三元体系中掺杂YbF<,3>后破坏了网络完整性,降低系统析晶稳定性能.     

β-delayed neutron decay of 21N

The β-delayed neutron and γ spectra of neutron-rich nucleus ²¹N using β-γ and β-n coincidence measurements were presented in this paper. Thirteen new neutron groups ranging from 0.28 MeV to 4.98 MeV and with a total branching ratio 88.7±4.2% were observed. One γ transition among the excited states of ²¹O, and four γ transitions among the excited states of ²⁰O were identified in the β decay chain of ²¹N. The ungated half-life of 83.8±2.1 ms was also determined for ²¹N.     

Minority Carrier Lifetime in As-Grown Germanium Doped Czochralski Silicon

The minority carrier lifetime of as-grown germanium-doped Czochralski （GCZ） silicon wafers doped with germanium concentrations [Ge]=10^16-10^18 cm^-3 is investigated in comparison with conventional CZ silicon samples. It is found that the lifetime distribution along the ingot changes with the variation of[Ge]. There is a critical value of [Ge] = 10^16 cm^-3 beyond which Ge can obviously influence the lifetime of as-grown ingots. This phenomenon is considered to be associated with the competition or combination between the oxygen related thermal donors （TDs） and electrically active Ge-related complexes. The related formation mechanisms and distributions are also discussed.     

Optical Properties of Co-BaTiO3/Mg（100） Nano-Composite Films Grown by Pulsed Laser Deposition Method

Co nanoparticles embedded in a BaTiO3 matrix, namely Co-BaTiO3 nano-composite films are grown on Mg（100） single crystal substrates by the pulsed laser deposition （PLD） method at 650℃. Optical properties of the CoBaTiO3 nano-composite films are examined by absorption spectra （AS） and photoluminescence （PL） spectra. The results indicate that the concentration of Co nano-particles strongly influences the electron transition of the Co BaTiO3 nano-composite films. The PL emission band ranging from 1.9 to 2.2eV is reported. The AS and PL spectra suggest that the band gap is in the range of 3.28-3.7eV.     

LBM伪势MRT三维模型GPU并行计算的性能优化

格子Boltzmann方法伪势模型算法中的格点间计算未完全局部化,因此在并行计算时需要更多次的全局内存读写、使用更多数量的寄存器和线程同步操作,从而导致GPU并行计算效率下降.本文针对伪势模型并行计算的局限性,基于三维十五速格子结构的多松弛时间伪势模型,以气液相分离为算例,通过合并访问的方式提高全局内存的读写效率;并提出一种"定向转移"算法,提高格子边界格点获取邻居格点数据的效率;最后探索不同资源分配中各种因素对计算效率的影响,总结最优资源分配的方法.     

Recent advances in MXene: Preparation,properties, and applications

Owing to the exceptional properties of graphene, intensive studies have been carried out on novel two-dimensional (2D) materials. In the past several years, an elegant exfoliation approach has been used to successfully create a new family of 2D transition metal carbides, nitrides, and carbonitrides, termed MXene, from layered MAX phases. More recently, some unique properties of MXene have been discovered leading to proposals of potential applications. In this review, we summarize the latest progress in development of MXene from both a theoretical and experimental view, with emphasis on the possible applications.     

Characteristics and properties of metal aluminum thin film prepared by electron cyclotron resonance plasma-assisted atomic layer deposition technology

Metal aluminum (Al) thin films are prepared by 2450-MHz electron cyclotron resonance plasma-assisted atomic layer deposition on glass and p-Si substrates using trimethylaluminum as the precursor and hydrogen as the reductive gas. We focus our attention on the plasma source for thin-film preparation and annealing of as-deposited films related to the surface square resistivity. The square resistivity of as-deposited Al film is greatly reduced after annealing and almost reaches the value of bulk metal. Through chemical and structure analysis we conclude that the square resistivity is determined by neither contaminant concentration nor surface morphology, but by both crystallinity and crystal size in this process.