Brauer代数的图子式(英文)

本文研究Brauer代数的根基问题.利用图子式的方法,获得了Gavarini的猜想对Brauer代数B1n是成立的结果.     

脉冲激光沉积方法制备ZnO薄膜生长参量对发光特性的影响

用脉冲激光沉积（PLD）方法在Si（111）衬底上制备了ZnO薄膜。以325nmHe-Cd激光器为光源对薄膜进行了荧光光谱分析,用X射线衍射仪（XRD）和原子力显微镜（AFM）分别对薄膜的结构和形貌进行了分析。脉冲激光沉积方法的主要生长参量为氧压、激光重复频率、生长温度和激光能量。通过控制这些参量变量,研究了这些参量对ZnO薄膜发光特性的影响,得到了用于紫外发光的ZnO薄膜生长的优化条件：发现在温度为650℃左右、氧压50Pa左右、频率5Hz左右的范围内能得到半峰全宽较窄,强度较大的紫外发光峰。分析认为紫外峰主要是由激子辐射复合发光形成的,绿光带主要和Ozn的存在密切相关,氧空位是蓝光发射的重要原因。     

Electronic structure,Dirac points and Fermi arc surface states in three-dimensional Dirac semimetal Na_3Bi from angle-resolved photoemission spectroscopy

The three-dimensional(3D) Dirac semimetals have linearly dispersive 3D Dirac nodes where the conduction band and valence band are connected. They have isolated 3D Dirac nodes in the whole Brillouin zone and can be viewed as a 3D counterpart of graphene. Recent theoretical calculations and experimental results indicate that the 3D Dirac semimetal state can be realized in a simple stoichiometric compound A_3Bi(A = Na, K, Rb). Here we report comprehensive high-resolution angle-resolved photoemission(ARPES) measurements on the two cleaved surfaces,(001) and(100), of Na_3Bi. On the(001) surface, by comparison with theoretical calculations, we provide a proper assignment of the observed bands, and in particular, pinpoint the band that is responsible for the formation of the three-dimensional Dirac cones. We observe clear evidence of 3D Dirac cones in the three-dimensional momentum space by directly measuring on the k_x–k_y plane and by varying the photon energy to get access to different out-of-plane k_zs. In addition, we reveal new features around the Brillouin zone corners that may be related with surface reconstruction. On the(100) surface, our ARPES measurements over a large momentum space raise an issue on the selection of the basic Brillouin zone in the(100) plane. We directly observe two isolated 3D Dirac nodes on the(100) surface. We observe the signature of the Fermi-arc surface states connecting the two 3D Dirac nodes that extend to a binding energy of ~150 me V before merging into the bulk band. Our observations constitute strong evidence on the existence of the Dirac semimetal state in Na_3Bi that are consistent with previous theoretical and experimental work. In addition, our results provide new information to clarify on the nature of the band that forms the3 D Dirac cones, on the possible formation of surface reconstruction of the(001) surface, and on the issue of basic Brillouin zone selection for the(100) surface.     

高质量NaNdF_4六方棱柱纳米棒的水热形貌控制合成及发光性质

采用水热法在温和的条件下合成了具有规则外形的六方棱柱状NaNdF4纳米棒。X射线衍射(XRD)分析表明:产物为纯六方相NaNdF4,场发射扫描电镜(SEM)分析表明产物形貌为棱柱状纳米棒,长约为550 nm,棒的端部呈规则六边形,边长约为85nm。高分辨透射电子显微镜(HRTEM)和选区电子衍射(SD)显示所得样品为良好的单晶。NaNdF4晶体的生长动力学过程表明:螯合剂(EDTA-Na2)与稀土金属离子间的螯合作用受pH值影响,导致成核速度变化,进而影响NaNdF4纳米晶的最终尺寸和形貌。室温下的NaNdF4纳米棒的发光峰位于红外光范围(λ=892,1 058,和1 342 nm),其最强发射峰位于1 058 nm,对应于Nd3+的4F3/2→4I11/2f-f跃迁。     

MnS纳米线阵列上MnS花状球的水热合成

通过水热处理的方法,在氧化铝模板表面生成的MnS纳米线阵列上合成了六方相MnS花状球。利用场发射扫描电镜,透射电子显微镜,高分辨透射电子显微镜,选区电子衍射和X射线衍射对制备的样品进行了分析与表征。结果表明MnS花状球是在MnS纳米线阵列上生长的,纳米线的直径为70～80nm,与氧化铝模板的孔径一致且结晶性较好。随着阳极氧化氧化铝模板(AAO)的孔洞长度的减少,MnS花状球的数量快速增加。提出了MnS复合纳米结构可能的生长机制:氧化铝模板和反应中硫脲分解产生的H2S气体对产物的最终形貌有很重要的影响。室温光致发光光谱显示在420nm处存在一个很强的MnS带边发射峰。