FeCoB-SiO2磁性纳米颗粒膜的微波电磁特性

采用交替沉积磁控溅射工艺制备了超薄多层的FeCoB SiO2 磁性纳米颗粒膜 .利用x射线衍射仪、扫描探针显微镜、透射电子显微镜分析了薄膜的微结构和形貌特征 .采用振动样品磁强计、四探针法、微波矢量分析仪及谐振腔法测量薄膜试样的磁电性能和微波复磁导率 .重点对SiO2 介质相含量、薄膜微结构对电磁性能产生重要影响的机理做了分析和探讨 .结果表明 :这类FeCoB SiO2 磁性纳米颗粒膜具有良好的软磁性能和高频电磁性能 ,2GHz时的磁导率 μ′高于 70 ,可以应用于高频微磁器件或微波吸收材料的设计     

红光激发下掺Ho3+氟化物薄膜的上转换发光

利用激光脉冲沉淀法制备了稀土Ho~(3 )掺杂的氟化物薄膜。观测到处于薄膜中的Ho~(3 )离子在632.8nm红光激发下的上转换发射。这些上转换发射包括:~5S_2→~5I_7,~5F_4→~5I_7和~5S_2→~5I_8。     

热丝加热电流对CH薄膜沉积速率和表面形貌的影响

 热丝辅助裂解法是结合气相沉积制备聚对二甲苯薄膜和热丝化学气相沉积而形成的一种制-CH薄膜的新方法。热丝辅助裂解法的最大特点就是在保持低衬底温度情况下可以获得高沉积速率，而热丝加热电流对薄膜沉积速率和薄膜表面形貌具有重要影响。研究表明，热丝加热电流越大，薄膜沉积速率越高，在加热电流9A时，薄膜沉积速率可达0.002mm/min，同时薄膜表面粗糙度随之增加，薄膜表面也开始出现其它元素污染，因此，一般热丝加热电流选择为7A附近。     

短脉冲强激光在稀薄等离子体中传播时的电磁类孤立子

 采用二维粒子模拟方法，研究了短脉冲强激光在稀薄等离子体中传播时电磁类孤立子的产生和时空演化过程。通过分析电磁场与等离子体波的非线性能量交换和激光场的频率谱结构等，给出了电磁类孤立子形成的基本物理图像，讨论了等离子体参数对电磁类孤立子形成的影响。模拟结果表明：类孤立子的形成是由于局部电磁波振荡频率减小至等离子体频率引起的，初始等离子体密度越高越容易形成空间局域结构。     

FTIR measurements of CO2 line positions and intensities at high temperature in the 3700-3750 cm spectral region

Positions and intensities for 453 spectral lines in 12 rovibrational bands of ¹²C¹⁶O₂ have been determined between 3700 and 3750 cm⁻¹. At three temperatures (294, 500, and 698 K) eight spectra have been recorded at a pressure around 5 mbar and for an absorption path of about 190 cm⁻¹ using a Bomen DA3 Fourier transform spectrometer (4 × 10⁻³ cm⁻¹ resolution). Some of the measured positions and intensities can be compared with recent experimental results that validate the experimental set-up and the data analysis procedure. The results are also compared with the values listed in the HITRAN 2000 database. If the agreement is generally good, discrepancies are observed for three hot bands.     

An Efficient Method for the Synthesis of 3-Cyano-6-hydroxy-2(1H)-pyridinones under Microwave Irradiation and Solvent-free Conditions

Summary. Three component condensation of alkylacetoacetates, primary amines, and alkyl cyanoacetates catalyzed by solid supports under microwave irradiation gave N-alkyl 3-cyano-6-hydroxy-2(1H)-pyridinones with high yields. Upon carrying out the reaction under the same condition on acidic alumina, zeolite HY, silica gel, and montmorillonite K-10, the best yields were achieved by silica gel. Corresponding author. E-mail: balalaie@yahoo.com Received August 28, 2002; accepted September 3, 2002     

酵母蛋白质网络的动力学性质

蛋白质-蛋白质、蛋白质-DNA相互作用网络决定了细胞中各种关键功能的执行．基于芽殖酵母(budding yeast saccharomyces cerevisiae)的蛋白质-蛋白质相互作用网络数据和相关的实验文献，我们建立了调控细胞周期和生命周期(cell cycle and life cycle)的蛋白质网络，并利用离散模型研究了该网络的动力学性质，研究表明：细胞周期网络的动力学性质具有很强的稳定性，约94％的蛋白质初态将演化到对应于生物学G1基态的稳定态，使其成为惟一的全局吸引点；同时，绝大多数的初态的演化路径都通过由G1激发态到G1基态的细胞周期演化路径，使细胞周期路径成为全局性的“吸引”路径。     

蓝光相变光盘的多层膜结构设计

为了使光盘获得优良的记录／读出性能并能够长期稳定地使用，必须优化设计相变光盘的多层膜结构。采用自行设计的模拟分析相变光盘读出过程设计软件，从光学角度出发模拟计算了蓝光(405nm)相变光盘的膜层结构，研究了多层膜系的反射率和反射率对比度等光学参量与各层膜厚度和槽深的关系。研究得出的最佳多层膜结构为：下介电层／记录层／上介电层／反射层的厚度对于台记录为100nm／10nm／25nm，／60nm，而对于槽记录则为140nm／15nm／30nm，／60nm，槽深为50nm。模拟计算结果对于将来高密度蓝光相变光盘的制备具有一定的指导意义。     

Investigation of the Li1+xV3O8 electrode–organic electrolyte interface by scanning photoelectron microscopy

To investigate the formation of a solid electrolyte interface (SEI) on the Li_1+xV₃O₈ electrode surface in the thermodynamic stability range of the organic electrolyte, we applied scanning photoelectron microscopy (SPEM) to a pristine electrode and to an electrode after ten cycles. The F K-edge absorption spectrum of the cycled electrode showed that LiF forms on the electrode surface during the lithium insertion–extraction process in the Li_1+xV₃O₈/Li cell. The photoelectron spectrum for the cycled electrode showed intense spectral features corresponding to Li 1s, F 2s, F 2p, and P 2p electron signals, whereas these spectral features were of negligible intensity for the pristine electrode. The above results give strong support for the formation of an SEI that consists of LiF and compounds containing phosphorus during operation of the battery. The SPEM images also revealed that the fluorine distribution on the surface of the cycled electrode was inhomogeneous.     

Duffing-van der Pol振子随机分岔的全局分析

应用广义胞映射方法研究了参激和外激共同作用的Duffing-van der Pol振子的随机分岔.以 系统参数通过某一临界值时，如果系统的随机吸引子或随机鞍的形态发生突然变化，则认为 系统发生随机分岔为定义，分析了参激强度和外激强度的变化对于随机分岔的影响.揭示了 随机分岔的发生主要是由于系统的随机吸引子与系统的随机鞍碰撞产生的.分析表明，广义 胞映射方法是分析随机分岔的有力工具，这种全局分析方法可以清晰地给出随机分岔的发生 和发展. 关键词： 随机分岔 全局分析 广义胞映射方法 随机吸引子 随机鞍