花状硫化铟纳米多级结构的液相合成及形貌调控机理

以C2H5NS和In(NO3)3为前驱物,采用简单的液相法成功制备了In2S3纳米多级结构,C2H5NS作为硫源的同时也起到了模板剂的作用.研究结果表明,前驱物浓度对In2S3形貌控制起着重要作用.随着In(NO3)3/C2H5NS摩尔比从1∶1.5增加到1∶6,In2S3纳米花呈现了不同的形貌和尺寸.XRD谱图显示,In2S3纳米花晶体具有立方结构.SEM和TEM照片显示,制备的In2S3纳米结构呈多级花状结构,这种结构由纳米片堆积组装而成.通过第一性原理计算并结合实验结果对C2H5NS影响纳米片生长的机理进行了分析,结果表明C2H5NS在In2S3(001)晶面上的吸附可以有效降低晶面的表面能,起到稳定晶面的作用;纳米花的形成是在C2H5NS影响In2S3的晶面稳定性及其成核速率之间的一个协同效应.In2S3纳米晶的形貌可以通过调整反应溶液中的C2H5NS浓度来调节.     

铱(Ir~Ⅲ)-稀土(Ln~Ⅲ)异核配合物发光性能研究

稀土离子(LnⅢ)丰富的4f电子跃迁能级,使稀土发光材料获得重要而广泛的应用.稀土配合物中天线基团的引入,弥补了稀土离子f-f跃迁禁阻而导致吸收较低的不足.而具有三重态吸收的过渡金属配合物作为天线基团,更使稀土离子的激发窗口红移.相关研究具有重要的理论意义和实际应用价值.本文主要综述近年来有关铱(IrⅢ)-稀土(LnⅢ)异核发光配合物方面的研究进展.     

Flame Spray Pyrolysis for Finding Multicomponent Nanomaterials with Superior Electrochemical Properties in the CoOx‐FeOx System for Use in Lithium‐Ion Batteries

High‐temperature flame spray pyrolysis is employed for finding highly efficient nanomaterials for use in lithium‐ion batteries. CoO_x‐FeO_x nanopowders with various compositions are prepared by one‐pot high‐temperature flame spray pyrolysis. The Co and Fe components are uniformly distributed over the CoO_x‐FeO_x composite powders, irrespective of the Co/Fe mole ratio. The Co‐rich CoO_x‐FeO_x composite powders with Co/Fe mole ratios of 3:1 and 2:1 have mixed crystal structures with CoFe₂O₄ and Co₃O₄ phases. However, Co‐substituted magnetite composite powders prepared from spray solutions with Co and Fe components in mole ratios of 1:3, 1:2, and 1:1 have a single phase. Multicomponent CoO_x‐FeO_x powders with a Co/Fe mole ratio of 2:1 and a mixed crystal structure with Co₃O₄ and CoFe₂O₄ phases show high initial capacities and good cycling performance. The stable reversible discharge capacities of the composite powders with a Co/Fe mole ratio of 2:1 decrease from 1165 to 820 mA h g^?1 as the current density is increased from 500 to 5000 mA g^?1; however, the discharge capacity again increases to 1310 mA h g^?1 as the current density is restored to 500 mA g^?1.     

Nano-crystalline FeOOH mixed with SWNT matrix as a superior anode material for lithium batteries

Nano-crystalline FeOOH particles(5～10 nm) have been uniformly mixed with electric matrix of single-walled carbon nanotubes(SWNTs)for forming FeOOH/SWNT composite via a facile ultrasonication method. Directly using the FeOOH/SWNT composite(containing 15 wt%SWNTs) as anode material for lithium battery enhances kinetics of the Li+insertion/extraction processes, thereby effectively improving reversible capacity and cycle performance, which delivers a high reversible capacity of 758 mAh g-1under a current density of 400 mA g-1even after 180 cycles, being comparable with previous reports in terms of electrochemical performance for FeOOH anode. The good electrochemical performance should be ascribed to the small particle size and nano-crystalline of FeOOH, as well as the good electronic conductivity of SWNT matrix.     

思维导图在结构化学课程教学中的应用与探索*

结合结构化学学科的自身特点以及学生对该学科的认识,探索用思维导图方法辅助结构化学的教学过程,将思维导图应用于结构化学教学中从而有助于学生形成逻辑严密、有机统一的量子理论知识结构体系,并且通过系统的调查问卷分析学生在学习过程中对思维导图的应用情况。     

Effects of post-deposition annealing on chemical composition of SiNx film in SiO2/SiNx/SiO2/Si stacked structure

To systematically evaluate the quality of SiN_x films in multi-stacked structures, we investigated the effects of post-deposition annealing (PDA) on the film properties of SiN_x within the SiO₂/SiN_x/SiO₂/Si stacked structure by performing X-ray photoelectron spectroscopy (XPS), X-ray reflectivity (XRR), Fourier transform infrared (FT-IR) spectroscopy, and scanning transmission electron microscope–electron energy loss spectroscopy (STEM-EELS) analyses. The XPS results showed that PDA induces the oxidation of the SiN_x layer. In particular, new finding is that Si-rich SiN_x in the SiN_x layer is preferentially oxidized by PDA even in multi-stacked structure. The XRR results showed that the SiN_x layer becomes thinner, whereas the interface layer between the SiN_x layer and Si becomes thicker. It is concluded by STEM-EELS and XPS that this interface layer is SiON layer. The density of N–H and Si–H bonding within the stacked structure strongly depends on the PDA temperature. Our study helps elucidate the properties of SiN_x films in stacked structures from various perspectives.     

Optical constants of organic insulators in the UV range extracted from reflection electron energy loss spectra

Reflection electron energy loss spectroscopy (REELS) spectra were measured for seven insulating organic compounds (DNA, Irganox 1010, Kapton, polyethylene [PE], poly(methyl methacrylate) [PMMA], polystyrene [PS] and polytetrafluoroethylene [PTFE]). Optical constants and energy band gaps were extracted from the measured REELS spectra after elimination of multiple electron scattering via a deconvolution and fitting the normalised single scattering energy loss spectra to Drude and Drude–Lindhard model dielectric functions, constrained by the Kramers–Kronig sum and f-sum rules. Satisfactory agreement is found for those optical constants for which literature data exists. For PTFE, the observed features in the optical data correspond to its electronic structure.     

Effects of mussel-inspired co-deposition of 2-hydroxymethyl methacrylate and poly (2-methoxyethyl acrylate) on the hydrophilicity and binding tendency of common hemodialysis membranes: Molecular dynamics simulations and molecular docking studies

Despite advances in the field, hemoincompatibility remains a critical issue for hemodialysis (HD) as interactions between various human blood constituents and the polymeric structure of HD membranes results in complications such as activation of immune system cascades. Adding hydrophilic polymer structures to the membranes is one modification approach that can decrease the extent of protein adsorption. This study conducted molecular dynamics (MD) simulations to understand the interactions between three human serum proteins (fibrinogen [FB], human serum albumin, and transferrin) and common HD membranes in untreated and modified forms. Poly(aryl ether sulfone) (PAES) and cellulose triacetate were used as the common dialyzer polymers, and membrane modifications were performed with 2-hydroxymethyl methacrylate (HEMA) and poly (2-methoxyethyl acrylate) (PMEA), using polydopamine-assisted co-deposition. The MD simulations were used as the framework for binding energy simulations, and molecular docking simulations were also performed to conduct molecular-level investigations between the two modifying polymers (HEMA and PMEA) and FB. Each of the three proteins acted differently with the membranes due to their unique nature and surface chemistry. The simulations show PMEA binds less intensively to FB with a higher number of hydrogen bonds, which reflects PMEA's superior performance compared to HEMA. The simulations suggest PAES membranes could be used in modified forms for blood-contact applications as they reflect the lowest binding energy to blood proteins.     

电子能量对沿面介质阻挡放电等离子体化学产物的影响

基于光电倍增管研制了一套无触发信号的双通道光学探测系统, 并组装了测试样机, 实现了对沿面介质阻挡放电(SDBD)等离子体约化电场的测量, 进而通过BOLSIG+软件获得了电子能量. 采用原位紫外吸收光谱和傅里叶变换红外光谱, 研究了SDBD等离子体在不同电压和频率下的化学产物的浓度变化, 并结合空气等离子体化学反应揭示了产物相互作用的微观机理. 结果表明, 电子能量能够改变电子碰撞反应的速率系数, 调控化学反应的源头活性粒子的浓度, 进而影响到化学产物的生成和猝灭.     

可见光驱动丰产金属卟啉类配合物催化的二氧化碳选择性还原反应

随着能源短缺和环境问题日益突出, 寻找清洁和可再生能源来替代化石燃料是本世纪科学家面临的最紧迫的任务之一. 为了实现我国“双碳”战略目标, 利用太阳能将二氧化碳(CO₂)转化为清洁燃料和化学品是实现社会可持续发展的途径之一. 催化剂是CO₂光还原技术的核心组成部分, 其可以吸附气态CO₂分子, 在可见光照射下将CO₂还原为一氧化碳(CO)、 甲酸(HCOOH)、 甲醇(CH₃OH)或甲烷(CH₄)等能源小分子. 目前, 新型CO₂还原光催化体系的开发取得了很好的进展. 本文综合评述了近年来均相及非均相丰产金属卟啉类催化剂在光催化CO₂还原中的研究进展, 并对在金属卟啉均相催化剂作用下, CO₂光还原为CO或CH₄的反应机理分别进行了介绍, 还讨论了金属卟啉基多孔有机聚合物与卟啉有机金属框架在光催化CO₂方面的重要应用. 最后, 对可见光驱动卟啉类金属配合物催化的CO₂还原的发展前景进行了展望.