Preparation of a two-state mixture of ultracold fermionic atoms with balanced population subject to the unstable magnetic field

We report a novel method to prepare a mixture of ~(40)K Fermi gas having an equal population of the two ground magnetic spin states confined in an optical dipole trap, in the presence of an noisy quantization(magnetic) field. We realize the equal population mixture by applying a series of RF pulses. We observe the dependence of the population distribution between two spin states on the number of the applied RF pulses and find that the decoherence effects leading to the population fluctuations are overcome by the high number of RF pules. Our demonstrated technique can be potentially used in the precision measurement experiments with ultracold gases in noisy environments.     

大学物理教学改革实践浅析——“问题导向”式学习的意义及应用

针对当前我国高校大学物理教学中存在诸多问题的现状,提出"问题导向"式教学的解决途径."问题导向"学习中"教"与"学"的方式有较大跨度的转变,它以学生为中心,以问题为导向,其中问题的设置环节对师生良好互动的实现至关重要.文章就振动内容问题的设计和提出进行简单应用尝试,以期为后续大学物理教学改革的持续进行提供帮助.     

频域反射法光纤延时精密测量

本文提出了一种应用于光纤延时系统中实现光纤延时精密测量的新方法,用以提高光纤延时测量的精度和准确性.该方法以1064 nm激光调制信号作为光源,通过测量回波信号的幅值和相位信息得到被测通道的频率响应,采用快速傅里叶逆变换得到被测目标的延时信息,实现光纤延时测量.本文通过理论分析和延时测量实验对频域反射法与传统的时域测量方法进行对比,使用频域反射法在调制频率范围10—200 MHz,采样频率间隔0.5 MHz的实验条件下,实现了3.3 ps延时测量分辨率,并证明了该方法具有比时域方法更高的测量精度,测量结果的准确性更好.     

绿色环保化学机械抛光液的研究进展

原子级加工制造是实现半导体晶圆原子尺度超光滑表面的有效途径.作为大尺寸高精密功能材料的原子级表面制造的重要加工手段之一,化学机械抛光(chemical mechanical polishing,CMP)凭借化学腐蚀和机械磨削的耦合协同作用,成为实现先进材料或器件超光滑无损伤表面平坦化加工的关键技术,在航空、航天、微电子等众多领域得到了广泛应用.然而,为了实现原子层级超滑表面的制备,CMP工艺中常采用的化学腐蚀和机械磨削方法需要使用具有强烈腐蚀性和高毒性的危险化学品,对生态系统产生了不可逆转的危害.因此,本文以绿色环保高性能抛光液作为对象,对加工原子量级表面所采用的化学添加剂进行分类总结,详尽分析在CMP过程中化学添加剂对材料表面性质调制的作用机理,为在原子级尺度下改善表面性质提供可参考的依据.最后,提出了CMP抛光液在原子级加工研究中面临的挑战,并对未来抛光液发展方向作出了展望,这对原子尺度表面精度的进一步提升具有深远的现实意义.     

Influence of metal electrodes on c‐axis orientation of AlN thin films deposited by DC magnetron sputtering

Nanocrystalline aluminum nitride (AlN) thin films were deposited on two types of metallic seed layers on silicon substrates, (111) textured Pt and (110) Mo, by reactive DC magnetron sputtering at low temperature (200 °C). Both textured films of Pt and Mo promote nucleation, thereby improving the crystallinity and epitaxial growth condition for AlN thin films. The deposited films were examined by X‐ray diffraction, scanning electron microscopy and atomic force microscopy techniques. The results indicated that the preferred orientation of crystallites greatly depends upon the kinetic energy of the sputtered species (target power) and seed layers used. Furthermore, AlN thin films with c‐axis perpendicular to the substrate grew on both types of metal electrodes at all power levels larger than 100 W. By comparing the structural properties and compressive stresses at perfect c‐axis orientation conditions, it is evident that AlN films deposited on (110) oriented Mo substrates exhibited superior properties as compared with Pt/Ti seed layers. Furthermore, less values of compressive stresses (?3 GPa) as compared with Pt/Ti substrates (?7.08 GPa) make Mo preferentially better candidate to be employed in the field of suspended Micro/Nano ‐ electromechanical systems (MEMS/NEMS) for piezoelectric devices. Copyright © 2017 John Wiley & Sons, Ltd.     

Improving the softness of BOPP films: From laboratory investigation to industrial processing

Young's modulus of biaxially oriented polypropylene (BOPP) films prepared with homemade film stretcher was investigated,which can be used to indicate the softness of fihns.It was found that the modulus of films was decreased by about 69％ as the content of polyethylene (PE) added into polypropylene (PP) reached 30％.Also,increasing draw temperature can induce lower stress level during stretching,which may lead to the formation of crystals with low orientation level and thus decreased modulus of films.Based on laboratory study,BOPP films produced on commercial line were studied by differential scanning calorimetry (DSC),wide and small-angle X-ray scattering (WAXS,SAXS) with varying contents of PE.SAXS results show that the crystals are oriented in both machine direction (MD) and transverse direction (TD),and the crystals are more oriented in TD than MD according to the WAXS results for all films.Also,the orientation parameter of crystal along TD increases from 0.68 to 0.83 as the contents of PE increase from 0％ to 25％.Meanwhile,the modulus of films in MD declines with increase of PE contents generally,improving the film softness.Orientation of crystals is thus an effective structure parameter to adjust the film softness.The relationship of processing-structure-property is also established.     

基于轴角转换器的一种高精度动态测角系统

设计了一种基于轴角转换器AD2S80的高精度感应同步器动态测角系统，分析了测角误差产生原因，提出了误差调整和补偿措施。通过实例数据表明：用谐波分析的方法对测角误差进行了调整与补偿，从而可大幅度提高测角精度。     

Orientation of the Azobenzene Spacer of Carboxylic Methyl Ester Gemini Surfactants in Langmuir Monolayer

The Langmuir monolayer of carboxylic methyl ester Gemini surfactants with the azobenzene spacer, referred to as MC_m(azo)MC_m, was prepared and the π‐A isotherms were measured. The result revealed an orientational picture of the azobenzene spacer at the air/water interface. Before irradiation, the planar trans‐azobenzene group adopted an approximate configuration parallel to the interface and lay on the air/water interface. After UV‐light irradiation, the spacer became the twisted cis‐one. Because of the location of the polar headgroups at the air/water interface, the two phenyl rings were also forced to take a near‐parallel orientation with the interface to reduce the free energy. As a result, the spacer thin‐layer was "thickened", which caused an elevation in collapse pressure.     

Spontaneous molecular orientation of polyimides induced by thermal imidization (4): Casting- and melt-induced in-plane orientation

Driving forces of in-plane chain orientation of polyimides (PIs) and their precursors were discussed and the mechanisms were proposed. A polyimide precursor, poly(amic acid) (PAA) derived from 3,3′,4,4′-biphenyltetracarboxylic dianhydride (s-BPDA) with p-phenylenediamine (PDA) showed a certain degree of in-plane orientation in its solution-casting process and clear molecular weight dependence. The results allowed us to propose the casting-induced in-plane orientation mechanism of the rigid PAA chains. The imidization-induced in-plane orientation mechanism was also discussed by investigating how residual solvent content influences the degree of in-plane orientation of resultant PI films. The results suggested that the magnitudes of the PI chain in-plane orientation are dominated by a combined effect of the initial PAA orientation, apparent stretching based on a great thickness decrease, and the molecular mobility during thermal imidization. In a system derived from s-BPDA with 2,2′-bis(trifluoromethyl)benzidine (TFMB), the effect of molecular mobility during thermal imidization was predominant when cured under usual thermal conditions owing to the presence of the trifluoromethyl groups contributing to weakened intermolecular interaction. In s-BPDA/TFMB and s-BPDA/m-TOL systems (m-TOL = m-tolidine), a melt-induced in-plane orientation phenomenon was observed at temperatures corresponding to their T_g’s when the extents of in-plane chain orientation (f values) were monitored as a function of temperature in the stepwise heating process. This behavior is very curious because there are no appreciable dimensional, morphological, and structural changes as some driving forces just above the T_g of s-BPDA/TFMB.     

Orientation Control of Photo‐Immobilized Antibodies on the Surface of Azobenzene‐Containing Polymers by the Introduction of Functional Groups

In our photo‐induced immobilization technique for an antibody (IgG) using azopolymers, the introduction of COOH and NMe₂ into the azopolymers, which can introduce surface charges, strongly affected the immobilization properties such as the efficiency of immobilization and the activity of the immobilized IgG (i.e., the orientation of the immobilized IgG). The introduction of COOH promoted a more active orientation of the immobilized IgG. The orientation was determined during the adsorption process onto the azopolymer surface in solution before photo‐immobilization, and was maintained during the photo‐immobilization. The surface charge of the azopolymer appears to be an important factor for IgG orientation, which involves electrostatic interactions between its Fab and the azopolymer surface.