高效液相色谱法同时测定染发剂中11种氨基苯酚

建立了高效液相色谱测定直接型与氧化型染发剂中11种氨基苯酚含量的分析方法。样品在亚硫酸氢钠的保护下用甲醇提取,高速冷冻离心净化;采用Agilent Zorbax SB C18色谱柱分离,流动相为5 mmol/L庚烷磺酸钠-40 mmol/L pH 2.8磷酸盐缓冲液和乙腈,梯度洗脱,11种氨基苯酚分别于230、270和400 nm下检测。11种氨基苯酚在0.05～500 mg/L线性范围内相关系数不小于0.9992,4-氨基-3-硝基苯酚、2-氨基-5-硝基苯酚、3-硝基-4-(2-羟乙基)氨基苯酚的方法定量限为5 mg/kg,其他8种氨基苯酚包括对氨基苯酚、对甲氨基苯酚、间氨基苯酚、邻氨基苯酚、5-氨基-2-甲基苯酚、4-氨基-3-甲基苯酚、2-甲基-5-(2-羟乙基)氨基苯酚和2-氨基-4-硝基苯酚定量限为20 mg/kg,方法回收率为88.5%～109.5%,相对标准偏差为2.2%～8.3%。测定了多种市售染发剂,结果表明该方法操作简单、测定结果准确,可用于直接型与氧化型染发剂中11种氨基苯酚的测定。     

SiC纤维增强Ti17合金复合材料轴向残余应力的拉曼光谱和X射线衍射法对比研究

准确测量和分析SiC纤维增强Ti合金复合材料(SiC_f/Ti)中残余应力状态对优化复合材料的成型工艺和理解其失效模式具有重要意义,但其残余应力的实验测量和分析仍是一个挑战.石墨C涂层作为SiC纤维与Ti17基体合金之间必需的扩散障涂层,承载了由纤维与基体之间热不匹配引入的残余应力.本文采用显微拉曼光谱法对比测量纤维表面C涂层在复合材料中和去掉基体无应力态下G峰的峰位,通过石墨C涂层应力态下峰位移动计算出SiCf/C/Ti17复合材料中SiC纤维受到～705.0 MPa的残余压应力.采用X射线衍射方法测量了不同方向上该复合材料中基体钛合金的晶面间距以获取其空间应变,根据三轴应力模型分析了复合材料中基体钛合金沿轴向方向的残余应力为～701.3 MPa的张应力,并通过线性弹性理论转化为SiC纤维的残余压应力为～759.4 MPa.两种测试方法都确定了SiC纤维在成型过程中受到残余压应力,且获得的应力值较为接近,都可以用于对SiC_f/Ti复合材料的残余应力测量.     

Investigation of voltammetric enzyme-linked immunoassay based on new system of ODA-H_2O_2-HRP

A voltammetric enzyme-linked immunoassay based on a new system of ODA-H2O2-HRP has first been developed and used in the detection of HRP and labelled HRP. By this method, the enzyme-catalyzing reaction of H2O2 oxidizing odianisidine (ODA) couples the electrode-reduction reaction of the oxidizing product of odianisidine, which produces a sensitive polarographic wave at potential of -0.56V (SCE) in Britton-Robinson buffer solution. In using this polarographic wave, a detection limit to HRP is 3.7×10-12g/mL and a linear range 1.0×10-11-2.0×10-9g/mL. And the mechanisms of the coupling reaction and the process of electro-reduction in the ODA-H2O2-HRP voltammetric enzyme-linked immunoassay system have also been carefully studied.     

基于变权重正交变换的腈纶/棉运动纤维面料近红外光谱识别和信息增强机制

为全面阐释近红外光谱技术在纺织服装行业质量控制中的应用难题,本论文以腈纶/棉混纺纤维运动面料为对象,针对纤维面料的重叠信息精准选择和预处理技术直观化筛选应用进行研究。同时,以混纺纤维中的棉含量为指标,对纺织面料近红外定量模型建立中的分子信息识别和应用机制、建模样品及常规光谱处理对构建模型的影响进行了系统解释。最后,通过变权重正交变换算法计算从分子层面解析了纤维面料谱峰信息差异化贡献及纤维面料散射对定量模型构建和预测稳定性的影响。以期为我国纺织行业及纤维制品的精准化控制和质量表征特异化设备开发提供技术指导和参考。     

Effects of polarization and p-type GaN resistivity on the spectral response of InGaN/GaN multiple quantum well solar cells

Effects of polarization and p-type GaN resistivity on the spectral response of InGaN/GaN multiple quantum well(MQW) solar cells are investigated. It is found that due to the reduction of piezoelectric polarization and the enhancement of tunneling transport of photo-generated carriers in MQWs, the external quantum efficiency(EQE) of the solar cells increases in a low energy spectral range(λ 370 nm) when the barrier thickness value decreases from 15 nm to 7.5 nm. But the EQE decreases abruptly when the barrier thickness value decreases down to 3.75 nm. The reasons for these experimental results are analyzed. We are aware that the reduction of depletion width in MQW region, caused by the high resistivity of the p-type GaN layer may be the main reason for the abnormally low EQE value at long wavelengths(λ 370 nm).     

Non-contact angle measurement based on parallel multiplex laser feedback interferometry

We present a novel precise angle measurement scheme based on parallel multiplex laser feedback interferometry （PLFI）, which outputs two parallel laser beams and thus their displacement difference reflects the angle variation of the target. Due to its ultrahigh sensitivity to the feedback light, PLFI realizes the direct non-contact measurement of non- cooperative targets. Experimental results show that PLFI has an accuracy of 8＂ within a range of 1400＂. The yaw of a guide is also measured and the experimental results agree with those of the dual-frequency laser interferometer Agilent 5529A.     

环戊烯分子内价轨道1a′的电子动量谱学研究

报道了环戊烯（C₅H₈）分子1a′轨道的电子动量谱，并且给出了价 轨道的电离能谱信息 .实验在非共面对称几何条件下用能量多道型电子动量谱仪完成，入射电子的能量为1200 eV 加结合能.通过Hartree-Fock 和密度泛函方法计算得到了C₅H₈分子 1a′轨道的动量谱. 对1a′轨道的电子动量谱的实验值和理论计算进行了比较，得到了该轨道的极强度（pole s trength）的信息.     

Distortion of optical feedback signals in microchip Nd:YAG lasers subjected to external multi-beam interference feedback

This paper proposes a theoretical analysis for the characteristics of an external cavity Nd:YAG laser with feedback of multiple-beam interference, which is induced by the multi-reentrance of the light from the external Fabry--Perot cavity. The theoretical model considers the multiple beam interference of the external Fabry--Perot cavity. It is found that the optical feedback signals are distorted to pulse waveforms instead of the sinusoidal ones in conventional feedback. The experimental results are in good agreement with the theoretical analysis. The obtained theoretical and experimental results can advance the development of a laser feedback interferometer.     

Influence of AlN buffer layer thickness on structural properties of GaN epilayer grown on Si (111) substrate with AlGaN interlayer

We present the growth of GaN epilayer on Si (111) substrate with a single AlGaN interlayer sandwiched between the GaN epilayer and AlN buffer layer by using the metalorganic chemical vapour deposition. The influence of the AlN buffer layer thickness on structural properties of the GaN epilayer has been investigated by scanning electron microscopy, atomic force microscopy, optical microscopy and high-resolution x-ray diffraction. It is found that an AlN buffer layer with the appropriate thickness plays an important role in increasing compressive strain and improving crystal quality during the growth of AlGaN interlayer, which can introduce a more compressive strain into the subsequent grown GaN layer, and reduce the crack density and threading dislocation density in GaN film.     

双折射光纤中偏振模色散的抑制

利用双折射光纤中孤子自捕获现象可以抑制偏振模色散,但这种抑制技术对传输参量有严格的限制.本文提出在双折射光纤中周期性地改变快慢轴的方法来抑制偏振模色散. 研究发现,这种方法在一定程度上能有效地抑制偏振模色散,并且光纤间偏振轴的夹角偏差有利于对偏振模色散的进一步抑制.