凝胶渗透色谱净化-柱后光化学衍生-高效液相色谱法同时测定食用植物油中9种真菌毒素

提出了用凝胶渗透色谱净化和柱后光化学衍生-高效液相色谱法(HPLC)测定食用油中9种真菌毒素。样品用乙腈均质提取,用凝胶色谱柱进行净化。为解决黄曲霉素B1和G1在水溶液中的荧光猝灭问题,在二极管阵列检测器(DAD)和荧光检测器(FLD)之间连接了光化学衍生器,使B1和G1衍生成荧光强度高的物质。HPLC分析中用SunFireTMC18色谱柱和以不同体积比的(A)水和(B)甲醇-乙腈(1+1)溶液的混合液为流动相进行梯度洗脱。9种真菌毒素分别在一定浓度范围内呈线性,检出限(3S/N)在0.01~0.20mg·kg-1之间。以空白样品作基体进行加标回收试验,回收率在83.0%~97.4%之间,相对标准偏差(n=6)在1.2%~4.8%之间。     

PW_(11)O_(39)Co(Ⅱ)(H_2O)~(5-)的均相及异相体系可见光催化性能研究

以模型污染物罗丹明B(RhB)的光降解为探针,评估了Keggin型钴取代杂多阴离子PW11O39Co髤(H2O)5-(PW11Co)及其异相体系PW11Co/D301R的可见光催化活性,提出了光催化反应的机理,同时考察了催化剂用量、溶液酸度以及溶液中PW11Co和RhB的相互作用对RhB可见光催化降解速率的影响。实验结果表明,PW11Co均相体系及其异相体系PW11Co/D301R对RhB的可见光降解均有较高的光催化活性,但PW11Co/D301R的光催化活性更高。导致RhB降解的主要是羟基自由基。与PW11Co均相体系相比,在PW11Co/D301R异相体系中由于PW11Co与RhB的配位作用大为减弱,同时D301R对RhB具有富集作用,因而大大提高了RhB的光催化降解速率。     

系列含4,5-二氮杂-9,9′-螺二芴配体的钌配合物的合成及其性能研究(英文)

合成了3个钌髤配合物,[Ru(bpy)2(SB)](PF6)2、[Ru(bpy)(SB)2](PF6)2和[Ru(SB)3](PF6)2(bpy=2,2′-bipyridine,SB=4,5-diaza-9,9′-spirobifluorene),通过核磁和元素分析对配合物的结构进行了确定。[Ru(bpy)2(SB)](PF6)2通过X射线单晶衍射确认了结构。研究了配合物的光物理性能。结果表明[Ru(bpy)2(SB)](PF6)2在乙腈中的发桔红光,波长为606 nm,量子产率约为0.001 2。在同样条件下[Ru(bpy)(SB)2](PF6)2和[Ru(SB)3](PF6)2的发光非常微弱甚至几乎没有发光。还研究了这些配合物的电致化学发光性能。随着配体中SB含量的增加,发光的峰电压从1.36 V增加到1.58 V,相对发光强度从731降低到52。     

Chemoselective hydrogenolysis of tetrahydrofurfuryl alcohol to 1,5-pentanediol over Ir-MoOx/Si02 catalyst

In this work, MoOx promoted Ir/SiO2 catalysts were prepared and used for the selective hydrogenolysis of tetrahydrofurfuryl alcohol （THFA） to 1,5-pentanediol in a continuous flow reactor. The effects of different noble metals （Ir, Pt, Pd, Ru, Rh）, supports and Ir contents were screened. Among the investigated catalysts, 4 wt%Ir-MoOx/SiO2 with a Mo/Ir atomic ratio of 0.13 exhibited the best catalytic performance. The synergy between Ix particles and the partially reduced isolated MoOx species attached on them is essential for the excellent catalytic performance of Ix-MoOx/SiO2. The catalyst exhibited a better hydrogenolysis efficiency of THFA with the selectivity of 1,5-pentanediol of 65%-74% at a conversion of THFA of 70%-75% when the initial THFA concentration is ranging from 20 wt% and 40 wt%. And higher system pressure was also in favor of the conversion of THFA. During a stability test, the conversion of THFA and 1,5-pentanediol yield over Ix-MoOz/SiO2 decreased with reaction time, which can be explained by the leaching of Mo species during the reaction.     

黄油中8种类固醇激素的液相色谱/串联质谱检测

建立了黄油中雌酮、α-雌二醇、β-雌二醇、雌三醇、睾酮、表睾酮、孕酮和丙酸睾酮8种类固醇激素的凝胶渗透色谱(GPC)-液相色谱/串联质谱(LC-MS/MS)检测方法。样品用乙酸乙酯-环己烷(1∶1,V/V)提取,提取液经GPC柱净化除脂,GPC浓缩液采用C18色谱柱(100 mm×2.0 mm i.d.,3.0μm)分离,以乙腈和水为流动相进行梯度洗脱,电喷雾电离多反应监测模式进行定性和定量分析。8种类固醇激素以基质匹配外标法定量,药物在1.0~20.0μg/kg线性范围内相关系数(r)均大于0.999;方法检出限(S/N=3)为0.04~0.30μg/kg,定量限LOQs(S/N=10)为1.0μg/kg;添加水平为1.0,2.0,4.0μg/kg时,回收率范围在64.1%~110%之间;相对标准偏差(RSD)小于11%。结果表明,本方法准确、可靠,满足黄油中8种类固醇激素的检测分析要求。     

油脂类食品中脂肪酸单氯丙醇单酯和双酯的分离测定

建立了食品中脂肪酸单氯丙醇单酯与双酯含量的测定方法。称取0.1 g的油脂样品,加入内标后,转入氨基固相萃取柱,先以6.0 mL正己烷洗脱脂肪酸单氯丙醇双酯(MCPD双酯),再以6.0 mL正己烷-乙酸乙酯混合溶剂洗脱脂肪酸单氯丙醇单酯(MCPD单酯),分别收集洗脱液并浓缩至近干,残余物经甲醇钠水解和苯基硼酸(PBA)衍生后,供气相色谱/质谱(GC-MS)分析。MCPD单酯、MCPD双酯的检出限在83~142μg/kg(均以MCPD计)之间,线性范围为25~500μg/L(R2>0.9990)。以花生油和婴幼儿奶粉脂肪提取物为基质,在250~1000μg/kg范围内进行3种浓度水平的加标回收实验,MCPD单酯与双酯的回收率在86.5%~104.0%之间,相对标准偏差(RSD)为2.4%~13.2%(n=6)。此外,本方法成功应用于市售食用植物油和婴幼儿奶粉中MCPD单、双酯的污染调查。     

Fabrication of free-standing multilayer films by using pH-responsive microgels as sacrificial layers

A facile way to prepare free-standing polyelectrolyte multilayer films of poly(sodium 4-styrenesulfonate)(PSS)/poly(diallyldimethylammonium)(PDDA) was developed by applying a new pH-dependent sacrificial system based on cross-linked poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) microgels. The tertiary amine groups of PDMAEMA microgels can be protonated in acidic environment, and the protonated microgels were deposited by layer-by-layer (LbL) technique with PSS. PSS/PDDA multilayer films were constructed on the top of the PSS/microgels sacrificial layers. The LbL assembly process was investigated by UV–vis spectroscopy. Further study shows that the free-standing PSS/PDDA multilayer films can be obtained within 3 min by treating the as-prepared films in alkali aqueous solution with a pH of 12.0. The pH-triggered exfoliation of PSS/PDDA multilayer films provides a simple and facile way to prepare LbL assembled free-standing multilayer films.     

Constructing Charge-Transfer Excited States Based on Frontier Molecular Orbital Engineering: Narrowband Green Electroluminescence with High Color Purity and Efficiency

The design and synthesis of organic materials with a narrow emission band in the longer wavelength region beyond 510 nm remain a great challenge. For constructing narrowband green emitters, we propose a unique molecular design strategy based on frontier molecular orbital engineering (FMOE), which can integrate the advantages of a twisted donor–acceptor (D-A) structure and a multiple resonance (MR) delayed fluorescence skeleton. Attaching an auxiliary donor to a MR skeleton leads to a novel molecule with twisted D-A and MR structure characteristics. Importantly, a remarkable red-shift of the emission maximum and a narrowband spectrum are achieved simultaneously. The target molecule has been employed as an emitter to fabricate green organic light-emitting diodes (OLEDs) with Commission Internationale de L'Eclairage (CIE) coordinates of (0.23, 0.69) and a maximum external quantum efficiency (EQE) of 27.0 %.     

Design Strategies for High-Performance Aqueous Zn/Organic Batteries

Organic electroactive compounds are attractive to serve as the cathode materials of aqueous zinc-ion batteries (ZIBs) because of their resource renewability, environmentally friendliness and structural diversity. Up to now, various organic electrode materials have been developed and different redox mechanisms are observed in aqueous Zn/organic battery systems. In this Minireview, we present the recent developments in the energy storage mechanisms and design of the organic electrode materials of aqueous ZIBs, including carbonyl compounds, imine compounds, conductive polymers, nitronyl nitroxides, organosulfur polymers and triphenylamine derivatives. Furthermore, we highlight the design strategies to improve their electrochemical performance in the aspects of specific capacity, output voltage, cycle life and rate capability. Finally, we discuss the challenges and future perspectives of aqueous Zn/organic batteries.     

C.I.颜料红177中间体的制备工艺改进

本文较为系统地研究了铜粉催化剂加入方式对C.I.颜料红177中间体4,4'-二氨基-1,1'-二蒽醌-3,3'-二磺酸(DAS)合成过程中的乌尔曼偶联反应速率的影响规律。 研究结果表明,在55 ℃较佳反应温度下,先加入与溴氨酸钠质量比为2:5的铜粉,反应一段时间后再加入与溴氨酸钠的质量比为1:5的铜粉,与一次性加入与溴氨酸钠的质量比为3:5的铜粉相比较,综合反应时间可节省2~3 h。 另外,对于DAS中混有的铜盐,采取在制备过程中加入柠檬酸的方法予以去除,此举可提高DAS的纯度。 当铜粉与柠檬酸的质量比为6:1时,可使DAS中铜盐的含量小于0.001%。 此外还探究了蒸馏后滤液的剩余量对DAS收率的影响,结果表明,滤液的剩余量在20 mL时,DAS的收率在95%以上。 基于本文的研究结果提出,欲进一步提高该反应的收率,需要寻找更高效的催化剂。