Solvent extraction of U(VI) by trioctylphosphine oxide using a room-temperature ionic liquid

The unique physical and chemical properties of room-temperature ionic liquids(RTILs) have recently received increasing attention as solvent alternatives for possible application in the field of nuclear industry, particularly in liquid-liquid separations of radioactive nuclides. We investigated solvent extraction of U(VI) from aqueous solutions into a commonly used ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide([C4mim][NTf2]) using trioctylphosphine oxide(TOPO) as an extractant. The effects of contact time, TOPO concentration, acidity, and nitrate ions on the U(VI) extraction are discussed in detail. The extraction mechanism was proposed based on slope analysis and UV-Vis measurement. The results clearly show that TOPO/[C4mim][NTf2] provides a highly efficient extraction of U(VI) from aqueous solution under near-neutral conditions. When the TOPO concentration was 10 mmol/L, the extraction of 1 mmol/L U(VI) was almost complete( 97%). Both the extraction efficiency and distribution coefficient were much larger than in conventional organic solvents such as dichloromethane. Slope analysis confirmed that three TOPO molecules in [C4mim][NTf2] bound with one U(VI) ion and one nitrate ion was also involved in the complexation and formed the final extracted species of [UO2(NO3)(TOPO)3]+. Such a complex suggests that extraction occurs by a cation-exchange mode, which was subsequently evidenced by the fact that the concentration of C4mim+ in the aqueous phase increased linearly with the extraction percent of U(VI) recorded by UV-Vis measurement.     

正溴丁烷合成虚拟仿真系统的设计与辅助实验教学研究*

介绍了正溴丁烷合成虚拟仿真系统的设计与功能,并结合具体的教学实践和研究结果的对比分析,提出了虚实结合的混合式教学模式,这种教学模式能有效解决传统实验教学过程中实验预习效果差、过程性评价难的教学痛点。     

基于光楔阵列产生光学涡旋阵列的研究

在研究光楔衍射法产生单涡旋的基础上,基于长条形光楔阵列,提出了利用光束阵列衍射产生涡旋阵列的方法.该方法要求光束阵列在平行于光楔边缘方向上的光束间距等于光束直径的整数倍.利用超精密机床采用一体化加工法加工了光楔阵列元件,验证了该方法的可行性.利用空间光调制器快速灵活调整光束阵列的优点,搭建了借助空间光调制器加载达曼光栅衍射产生所需光束阵列的实验光学系统.针对光束阵列与光楔阵列的匹配问题,研究了达曼光栅掩模图基本单元对光束阵列的调控,获得了可调结构的光束阵列.实验产生了拓扑荷一致的光学涡旋阵列,与仿真结果相一致,证明所提方法的有效性.     

液态丙烯腈低聚物修复聚丙烯腈基碳纤维微孔缺陷

提出一种全新的缺陷修复的方法,即将聚丙烯腈基(PAN)碳纤维T300在液态丙烯腈低聚物(LAN)中浸渍后,再进行预氧化和碳化热处理,可以将T300的拉伸强度提高25%.应用二维小角X射线散射(SAXS)法可以计算出LAN修复缺陷前后T300微孔缺陷的长度(L)、横截面尺寸(lp)、取向角(Beq)、相对体积(Vrel)的变化,结果表明碳纤维的拉伸性能越好,微孔的长度、取向角、相对体积含量越小.T300拉伸性能的提高是由于缺陷修复的结果.应用BET比表面积法、扫描电子显微镜(SEM)表征LAN修复缺陷前后T300的比表面积以及表面形貌的变化,结果表明,T300在LAN中浸渍并经过预氧化和碳化热处理,比表面积变小,表面缺陷明显减少.进一步验证LAN对碳纤维中的微孔缺陷具有修复作用.应用X射线光电子能谱(XPS)法表征LAN修复前后T300表面化学成分的变化,结果表明,LAN修复后含氧官能团(C―OH,C=O,HO―C=O)显著增加,有利于增强碳纤维与树脂基体之间的相互作用,从而提高碳纤维的力学性能.     

微波消解-电感耦合等离子体质谱法测定粮食中12种重金属元素

粮食样品用硝酸-过氧化氢微波消解处理,采用电感耦合等离子体质谱法测定样品溶液中12种重金属元素(砷、铅、镉、硒、铬、铊、锰、镍、铜、铀、钴、钒)的含量。采用内标法消除基体的影响。方法的检出限(3S/N)在0.092~17.5pg·g-1之间。方法的加标回收率在88.1%~118%之间,相对标准偏差(n=5)小于6.0%。方法用于鸡肉标准物质(GBW 10018)中重金属含量的测定,测定值与认定值相符。     

Tuning of NaTaO_3 Band Structure through Mn~（2＋） Ion Doping and the Enhanced Visible Light Response

Pure and Mn-doped NaTaO3 nanoparticles were synthesized by a simple hydro- thermal method. XRD and XPS results suggested that manganese ions were successfully doped into the NaTaO3 crystalline in Mn2＋ state. UV-vis diffuse reflectance spectra revealed the obvious red-shift in the series of manganese doped NaTaO3 nanoparticles, resulting in a decrease in the band gap of NaTaO3 with the increase of Mn2＋ doping concentration. The photo-degradation experiment indicated that manganese doped NaTaO3 showed good photocatalytic performance and methylene blue（MB） degradation is improved with lower doping concentration of manganese ions under visible light. The simulation of energy band structure by density functional theory unfolded that the substitution of Ta5＋ ions by Mn2＋ ions resulted in an intermediate band（IB） below the bottom of the conduction band（CB）, which was mainly attributed to the state of Mn 3d.     

Copolymerization of Ethylene with lO-Undecen-l-ol Using Highly Active Vanadium（III） Precatalysts Bearing Bis（imino）pyrrolyl Ligands

The copolymerizations of ethylene with 10-undecen-1-ol have been investigated using vanadium precatalysts, bis（imino）pyrrolyl vanadium（Ⅲ） complexes 1-3, 2,5-C4H2N（CH=NR）2VCl2（THF）2 [R = C6H5 （1）, 2,6-iPr2C6H3 （2）, C6F5 （3）], and the iminopyrrolyl and b-diketiminate ones for comparison. The polar monomer was pretreated by diethylaluminium chloride （present also as the cocatalyst） before the copolymerization. The monomer reactivity ratios were evaluated using the Fineman-Ross method. The ligand structure considerably influenced the catalytic activity and tolerance towards the polar monomer, the polar monomer incorporation and the molecular weights of the resultant copolymers. The bis（imino）pyrrolyl vanadium complexes exhibited promising catalytic performance for the copolymerization, and a high catalytic activity up to 3.84 kg/mmolv·h with a high comonomer incorporation of 14.0 mol% was achieved by complex 3 under mild conditions.     

银纳米簇荧光探针检测L-半胱氨酸

常温下合成了二氢硫辛酸(DHLA)包裹的银纳米簇(AgNCs),并基于L-半胱氨酸对AgNCs的荧光猝灭现象构建了AgNCs荧光探针对Cys的检测方法。结果表明,在优化条件下,AgNCs的荧光猝灭程度和Cys浓度在2.0~100μmol/L范围内呈现良好的线性关系(R2=0.998),检出限为1.77μmol/L(S/N=3)。在人体血清样品中Cys检测的加标回收率为94.0%~102.4%。     

液相色谱-四极杆-静电轨道阱高分辨质谱法测定保健食品中11种磷酸二酯酶抑制剂

保健食品样品用50%(体积分数)甲醇溶液超声提取15 min,提取液用水定容至50.0mL,离心,取上清液,经0.22μm微孔滤膜过滤,采用液相色谱-四极杆-静电轨道阱高分辨质谱法测定滤液中11种磷酸二酯酶抑制剂的含量。以Waters HSS T3色谱柱为固定相,以不同体积比的0.1%(体积分数)甲酸溶液和乙腈的混合液为流动相进行梯度洗脱,质谱分析中采用电喷雾离子源正离子模式和全扫描模式。11种磷酸二酯酶抑制剂的质量浓度均在2~100μg·L^-1内与其对应的峰面积呈线性关系,测定下限(10S/N)为0.02~0.5μg·L^-1。以空白样品为基体进行加标回收试验,所得回收率为75.7%~98.9%,测定值的相对标准偏差(n=6)为5.9%~14%。     

富马酸丙酚替诺福韦合成工艺改进

对富马酸丙酚替诺福韦的合成工艺进行了改进,以干燥的替诺福韦为起始原料,与亚磷酸三苯酯反应得到(R)-9-(2-(苯基磷酰基甲氧基)丙基)腺嘌呤（3）; 3被氯化亚砜氯代得(R)-9-(2-(((苯基)(氯代)(磷酰基)甲氧基)丙基)腺嘌呤（4）; 4与L-丙氨酸异丙酯盐酸盐缩合得9-((R)-2-(((S)-((1-(异丙氧基羰基)乙基)氨基)苯氧基磷酰基)甲氧基)丙基)腺嘌呤（5）; 5经析晶纯化得9-((R)-2-(((S)-（((S)-1-(异丙氧基羰基)乙基)氨基)苯氧基磷酰基)甲氧基)丙基)腺嘌呤（丙酚替诺福韦,6）; 6与富马酸成盐得富马酸丙酚替诺福韦,其结构经¹H NMR, ¹³C NMR, MS(ESI),元素分析和XRD确证。按改进工艺进行公斤级规模放大,产品总收率达到32.2%,化学纯度99.92%,非对映异构体纯度99.99%。