HS-SPME–GC–MS法测定水中2-甲基异冰片及土臭素

采用顶空固相微萃取–气质联用(HS-SPME–GC–MS)的方法对地表水中2-甲基异冰片(2-MIB)和土臭素(GSM)进行分析测定。通过试验确定了HS-SPME的最佳萃取条件:萃取头为DVB/CAR/PDMS,萃取时间为30 min,萃取温度为70℃,NaCl的加入量为30%(质量分数),萃取纤维在GC上的解吸温度为250℃。用内标法进行定量,2-MIB,GSM的质量浓度在5~100 ng/L范围内与色谱峰面积呈良好的线性关系,线性相关系数(r2)分别为0.999 7,0.997 0,检出限分别为0.8,1.7 ng/L。采用该法对水样进行测定,2-MIB,GSM测定结果的相对标准偏差为2.6%~6.3%(n=6),加标回收率为92%~112%。该方法能简单、快速地测定水中痕量嗅味物质。     

顶空固相微萃取-气相色谱-质谱联用测定饮用水中的2-甲基异莰醇和土臭素

2-甲基异莰醇(2-methylisoborneol, 2-MIB)和土臭素(geosmin, GSM)在水源水中大量分泌排放是造成饮用水土霉异味突发事件、引发居民用水恐慌的重用因素之一。使用顶空固相微萃取(HS-SPME)与气相色谱-质谱联用技术(GC-MS)建立了水库水、水库附近土壤、居民自来水中2-MIB和GSM的测定方法。结合正交分析优化了加盐量、萃取温度、萃取时间条件,在电子轰击(EI)-选择离子扫描(SIM)模式下进行了目标物的定性定量分析。结果表明:在5~1000 ng/L范围内,2-MIB和GSM的色谱峰面积与其质量浓度的线性关系良好(r²≥0.998), 2-MIB与GSM的检出限分别为0.72 ng/L和0.34 ng/L,定量限分别为2.40 ng/L和1.13 ng/L;目标物加标水平为10~600 ng/L时,平均回收率为93.6%~107.7%,相对标准偏差(RSD)≤6.1%(n=6)。基于上述方法,对辽宁省某地区水库水、水库附近土壤、居民自来水中的目标物进行检测,结果表明:水库水目标物质量浓度范围为3.0~3.6 ng/L,水库附近土壤中提取的2-MIB为8.1 ng/L、提取的GSM为17.8 ng/L,居民自来水中的目标物未检出。该方法操作简便、准确可靠,灵敏度高,无需有机溶剂,适合于饮用水中2-MIB和GSM的分析检测。     

高级氧化降解饮用水中嗅味物质土臭素和2-甲基异莰醇的研究进展

土嗅素(GSM)和2-甲基异莰醇(2-MIB)是受藻类污染的饮用水源中普遍存在的嗅味物质。常规工艺对GSM和2-MIB的去除能力十分有限,因嗅味问题引发的公众投诉时有发生,嗅味物质的有效去除已成为亟需解决的饮用水处理技术难题。本文梳理了水源中GSM和2-MIB的来源及存在形态,综述了高级氧化法降解GSM和2-MIB的研究进展,旨在为GSM和2-MIB的高效去除提供理论指导和技术支撑。     

气相色谱-质谱联用测定富营养化水体中的异味物质

通过固相微萃取富集,并采用气相色谱-质谱联用(GC-MS)测定了水中常见的两种异味化合物,即2-甲基异茨醇(2-MIB)、土味素(GSM),并对富营养化水体中的挥发性物质进行了初步分析。不同的异味物质吸附于75μm Carboxen/PDMS纤维涂层处理后,通过DB-WAX毛细管色谱柱得以分离。采用选择离子监测模式(SIM)对两种化合物(2-MIBm/z=95,GSMm/z=112)进行外标法定量分析,从而提高检测灵敏度。线性范围2-MIB为0.5~500 ng.L-1、GSM为1.0~500 ng.L-1,检出限分别为0.1,0.4 ng.L-1。用该法对富营养化水源水监测,2-MIB及GSM的分析结果的RSD值及加标回收率为3.35%,7.68%和105.0%,88.3%。     

大体积浓缩-固相微萃取-气相色谱-质谱联用测定水样中6种典型嗅味物质

2-甲基异崁醇(2-MIB)、土臭素(GSM)、2,4,6-三氯苯甲醚(TCA)、β-环柠檬醛(β-Cyclocitral)、β-紫罗兰酮(β-Ionone)和二甲基三硫醚(DMTS)为不同特征水体的典型嗅味物质。本研究建立了大体积浓缩-固相微萃取-气相色谱-质谱联用同时测定这6种痕量物质的方法。自制大体积玻璃萃取瓶,萃取体积为100 mL。优化的萃取条件:萃取时间30 min,NaCl离子浓度0.3 g/mL,萃取温度65℃,解吸时间2 min,溶液pH值4～9范围内,不影响萃取效果。各物质的检出限均低于1 ng/L,具有较高的灵敏度;加标回收率为86.0%～114.2%,具有较好的精密度;浓度在1～200 ng/L范围内线性关系良好。本方法应用于江河湖泊、水库、自来水出厂水和管网末端水等水体中嗅味物质的定量检测,结果表明:在富营养化的水体中DMTS,2-MIB和β-Cyclocitral的浓度较高;TCA在管网末端水中含量较高。     

液-液-液三相液相微萃取-高效液相色谱法检测尿样中的安非他明和氯胺酮

建立了液-液-液三相液相微萃取与高效液相色谱联用技术测定尿样中的安非他明和氯胺酮的方法。考察了萃取溶剂、料液相pH值、搅拌速度、萃取时间和接受相HCl浓度等因素对富集因子的影响,得到了萃取溶剂为300 μL甲苯,料液相pH值为11,接受相为1.0 μL 0.1 mol/L HCl,搅拌速度为600 r/min,萃取时间为50 min的最佳实验条件。在该条件下,获得了较高的富集因子;方法的线性范围为安非他明0.01～10 μg/mL,氯胺酮0.01～5 μg/mL,相对标准偏差均小于2%,检测限均为5 ng/mL (S/N=3)。建立的三相液相微萃取方法能有效地去除复杂基体的干扰,有机溶剂消耗少,萃取效率高,是一种有效、灵敏的样品前处理方法,适合于尿样中安非他明和氯胺酮的测定。     

分散液-液微萃取结合离子迁移谱测定人体唾液中的苯海拉明

建立一种结合便携式高分辨离子迁移谱(IMS)快速简便萃取唾液中的苯海拉明(DPH)的分散液-液微萃取法(DLLM E)。取2 mL唾液,采用10%(w:V)硫酸锌沉淀蛋白,以2 mL二氯甲烷为萃取剂对唾液中的苯海拉明进行萃取,萃取时间5 min,离心(3500 r/min,20 min),取二氯甲烷层,45℃真空干燥,甲醇复溶后进行IMS分析。结果表明,该方法可在短时间内完成对DPH的萃取分离及分析,DPH在39.4~1080 ng/mL范围内线性关系良好,标准曲线方程为I=3.62×10³-0.754(R²=0.978),检出限和定量限分别为11.8和39.4 ng/mL,平均回收率为89.0%~112%,RSD≤1.5%。该方法可实现对人体唾液中苯海拉明的快速测定。     

荧光衍生化-磁分散固相萃取/高效液相色谱检测池塘水与蔬菜中3种挥发性异味物质

以6-碳酰氯左氧氟沙星(LFC-Cl)为衍生试剂,磁性氧化石墨烯(MGO)为吸附剂,建立了2-甲基异莰醇(2-MIB)、土臭素(GSM)和3-甲基-1-丁醇(3-MB)的高效液相色谱荧光检测(HPLC-FLD)分析方法。在浓度为0.05 mol/L的4-二甲氨基吡啶(DMAP)乙腈溶液中,衍生温度60℃,反应时间90 min,超声波辅助条件下,可完成上述3种醇类挥发性异味物质(VOCs)的衍生化。在吸附剂用量20 mg、萃取时间20 min、解吸剂为乙腈(含1%甲酸)、解吸时间3 min条件下,能实现3种异味物质衍生物的富集和净化。在优化的HPLC条件下,15 min内可实现3种衍生物的基线分离和高灵敏检测。方法检出限(LOD)为0.020~0.95 ng/L,定量下限(LOQ)为0.10~3.3 ng/L,线性、精密度和回收率良好。与已报道的方法相比,该方法具有灵敏度高、样品前处理简单、仪器普适性好等优势,可用于池塘水、蔬菜中VOCs的快速、定量测定,为食品和环境水样监测提供了一种新方法。     

固相萃取-阴离子交换色谱法测定硝酸异辛酯合成后残留的混酸含量

建立了一种固相萃取-阴离子交换色谱-抑制型电导检测的分析方法,同时测定合成硝酸异辛酯(柴油十六烷值改进剂)反应后残留的混酸(硝酸和硫酸)的含量。样品经过Bond Elut C18OH固相萃取小柱萃取净化后,以1.0m L/min的流速,经Shim-pack IC-SA2阴离子交换分析柱(4.0 mm i.d×250mm,9μm)分离,淋洗液为1.8 mmol/L Na2CO3-1.7 mmol/L Na HCO3混合液,进行等度洗脱,并用外标法进行定量分析。硝酸和硫酸分别在0.3~9 mg/L和12~120 mg/L范围内呈良好的线性关系,相关系数分别为0.999和0.996;加标回收率分别为90.0%~101.43%和94.25%~102.4%,检出限为0.01 mg/L和0.05 mg/L,相对标准偏差RSD(n=6)小于3.0%。     

环境水体中致嗅有机物分析的样品前处理技术研究进展

环境水体中致嗅有机物种类繁多,常见的土霉味物质包括土臭素(GSM)、2-二甲基异茨醇(MIB)、2-甲氧基-3-异丙基吡嗪(IPMP)、2-甲氧基-3-异丁基吡嗪(IBMP)和2,4,6-三氯代苯甲醚(TCA)等,其在水中的质量浓度一般在ng/L ～μg/L水平且嗅阈值较低.该文总结了测定环境水体中痕量土霉味物质的气相色谱-质谱法,并对闭环捕集、吹扫捕集、液液萃取、固相萃取、固相微萃取、液相微萃取和搅拌棒吸附萃取7种样品前处理技术进行了介绍和对比.重点介绍了目前应用最广泛的顶空固相微萃取技术和新发展的液相微萃取、搅拌棒吸附萃取技术在环境水体中致嗅有机物分析中的应用,并展望了致嗅有机物的分析方法.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.