混合反胶束的电导与微结构研究

反胶束是两亲分子在非极性溶剂中形成的一种有序组合体，在医药、化工、采油、胶束催化及酶催化等领域中有重要应用．与胶束溶液相比，人们对反胶束的形成与结构的了解至今仍不充分．特别是对于由混合表面活性剂形成的反胶束的研究几乎无人涉及．本文采用动态光散射、电导及荧光光谱等手段对阴离子表面活性剂AOT与非离子表面活性剂形成的混合反胶束进行了研究，旨在探讨利用表面活性剂的复配来调节和控制反胶束的结构和性能．亚实验部分二异辛基磺化琉璃酸钠（AOT，Sigma公司）；Brij30为含4个氧乙烯基（EO基）的十二碳醇（AcrosOrgani…     

Water solubilization capacity of mixed reverse micelles: effect of surfactant component, the nature of the oil, and electrolyte concentration

Solubilization of water in mixed reverse micellar systems with anionic surfactant (AOT) and nonionic surfactants (Brijs, Spans, Tweens, Igepal CO 520), cationic surfactant (DDAB)-nonionic surfactants (Brijs, Spans, Igepal CO 520), and nonionic (Igepal CO 520)-nonionics (Brijs, Spans) in oils of different chemical structures and physical properties (isopropyl myristate, isobutyl benzene, cyclohexane) has been studied at 303 K. The enhancement in water solubilization has been evidenced in these systems with some exceptions. The maximum water solubilization capacity (omega(0,max)) in mixed reverse micellar systems occurred at a certain mole fraction of a nonionic surfactant, which is indicated as X(nonionic,max). The addition of electrolyte (NaCl or NaBr) in these systems tends to enhance their solubilization capacities further both at a fixed composition of nonionic (X(nonionic); 0.1) and at X(nonionic,max) at 303 K. The maximum in solubilization capacity of electrolyte (omega(max)) was obtained at an optimal electrolyte concentration (designated as [NaCl](max) or [NaBr](max)). All these parameters, omega(0,max) vis-a-vis X(nonionic,max) and omega(max) vis-a-vis [NaCl](max), have been found to be dependent on the surfactant component (content, EO chains, and configuration of the polar head group, and the hydrocarbon moiety of the nonionic surfactants) and type of oils. The conductance behavior of these systems has also been investigated, focusing on the influences of water content (omega), content of nonionics (X(nonionic)), concentration of electrolyte ([NaCl] or [NaBr]), and oil. Percolation of conductance has been observed in some of these systems and explained by considering the influences of the variables on the rigidity of the oil/water interface and attractive interactions of the surfactant aggregates. Percolation zones have been depicted in the solubilization capacity vs X(nonionic) or [electrolyte] curves in order to correlate with maximum in water or electrolyte solubilization capacity. The overall results, obtained in these studies, have been interpreted in terms of the model proposed by Shah and co-workers for the solubility of water in water-in-oil microemulsions, as their model proposed that the two main effects that determine the solubility of these systems are curvature of the surfactant film separating the oil and water and interactions between water droplets.     

STUDY ON PERCOLATION OF MIXED REVERSE MICELLES

The temperature-induced percolation behaviors of AOT reverse micelles in the presence of nonionic surfactants have been studied. The effects of water content, solvent and concentration of electrolyte in solubilized water have also been investigated. It was found that the percolation temperature of AOT reverse micelles was decreased by adding nonionic surfactants, and more pronounced effects were observed with the increase of EO chain length and content of nonionic surfactants. The increase of molecular volume of the solvent and the increase of concentration of the added NaCl electrolyte have shown assisting and resisting effects on the process, respectively. The apparent hydrodynamic diameter of droplets of different mixed reverse micelles has been measured using dynamic light scattering, by which the percolating mechanism of mixed reverse micelles was discussed in combination with the results obtained from conductivity measurements.     

Investigation on the basic hydrolysis of crystal violet in mixed reverse micelles formed with AOT and nonionic surfactants

 The kinetics and thermodynamics of the basic hydrolysis of crystal violet (CV) in mixed reverse micelles formed with anionic surfactant AOT and nonionic surfactants have been investigated. It was found that the mixed reverse micelles had inhibitory effects on CV hydrolysis compared with the normal aqueous solution, and the equilibrium constant K of the reaction in mixed reverse micellar systems is smaller than that in pure water. The influence of water content and surfactant composition in reverse micelles on the second-order rate constant k ₁ of the positive reaction, on the first-order rate constant k _-1 of the reverse reaction, as well as on the equilibrium constant K of the reaction has been studied, and the results obtained were interpreted in terms of the nature of surfactants and the properties of microenvironment where the reaction took place. Received: 24 October 1997 Accepted: 18 March 1998     

Intermicellar material exchange in reverse micelles formed by ionic AOT and nonionic Igepal surfactants studied by means of pulse radiolysis. Influence of the temperature

The recombination of thiocyanate anion radicals, (SCN) ₂ ⁻ , formed pulse radiolytically within the water pools of reverse micelles stabilized with anionic AOT and nonionic Igepal surfactants, was proved as an indicator reaction to study intermicellar exchange. It was found that the exchange process is slower inIgepal than in AOT reverse micelles with the same water to surfactant ratio. The apparent activation enthalpy and entropy of the exchange process were determined in different alkanes. For the AOT and Igepal reverse micelles the activation parameters increase with the droplet size, but for the AOT systems they do not significantly change with the increase of droplet concentration. For non-percolated systems the activation parameters for Igepal reverse micelles approach those for AOT reverse micelles. This result supports existing suggestions that the mechanism of intermicellar exchange does not differ in principle between reverse micelles stabilized with ionic and nonionic surfactants.     

Cyclic voltammetry and viscosity measurements of aggregated assemblies of anionic surfactants with nonionic surfactants and triblock copolymers

Cyclic voltammetry (CV) and viscosity measurements have been employed to study the aggregation behavior of mixed micellar systems of anionic surfactant (dioctyl sulfosuccinate sodium salt, AOT) with conventional nonionic surfactants such as Brij 35/TritonX-100/Tween 20/Tween 80/Myrj 45 and two triblock copolymers (L64 and F68). Critical micelle concentration (cmc) values have been determined for various micellar systems from CV measurements using 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) as an electroactive probe at 25 °C. Diffusion coefficient (D) has been evaluated from Randles–Sevcik equation which showed an overall decrease for most of the binary systems. The negative values of interaction parameters (β) obtained from regular solution theory suggest the synergistic behavior in all the binary systems except AOT + Tween 80 mixtures. The mixed systems of AOT with triblock copolymers showed stronger synergistic interactions than that of mixed systems of AOT with nonionic surfactants. A comparative evaluation of mixed systems of anionic surfactants AOT and sodium dodecyl sulfate with Myrj 45 and AOT + L64 and F68 has been made on the basis of different micellar parameters and structural properties of surfactants. Viscosity measurements also show similar type of interactions in the mixed micelles.     

Percolation phenomenon in mixed reverse micelles: the effect of additives

The conductivity of AOT/IPM/water reverse micellar systems as a function of temperature, has been found to be non-percolating at three different concentrations (100, 175 and 250 mM), while the addition of nonionic surfactants [polyoxyethylene(10) cetyl ether (Brij-56) and polyoxyethylene(20) cetyl ether (Brij-58)] to these systems exhibits temperature-induced percolation in conductance in non-percolating AOT/isopropyl myristate (IPM)/water system at constant compositions (i.e., at fixed total surfactant concentration, omega and X(nonionic)). The influence of total surfactant concentration (micellar concentration) on the temperature-induced percolation behaviors of these systems has been investigated. The effect of Brij-58 is more pronounced than that of Brij-56 in inducing percolation. The threshold percolation temperature, Tp has been determined for these systems in presence of additives of different molecular structures, physical parameters and/or interfacial properties. The additives have shown both assisting and resisting effects on the percolation threshold. The additives, bile salt (sodium cholate), urea, formamide, cholesteryl acetate, cholesteryl benzoate, toluene, a triblock copolymer [(EO)13(PO)30(EO)13, Pluronic, PL64], polybutadiene, sucrose esters (sucrose dodecanoates, L-1695 and sucrose monostearate S-1670), formamide distinctively fall in the former category, whereas sodium chloride, cholesteryl palmitate, crown ether, ethylene glycol constitute the latter for both systems. Sucrose dodecanoates (L-595) had almost marginal effect on the process. The observed behavior of these additives on the percolation phenomenon has been explained in terms of critical packing parameter and/or other factors, which influence the texture of the interface and solution properties of the mixed reverse micellar systems. The activation energy, Ep for the percolation process has been evaluated. Ep values for the AOT/Brij-56 systems have been found to be lower than those of AOT/Brij-58 systems. The concentration of additives influence the parameters Tp and Ep for both systems. A preliminary report for the first time on the percolation phenomenon in mixed reverse micelles in presence of additives has been suggested on the basis of these parameters (Tp and Ep).     

AOT/Triton X-100混合反胶束体系中假丝酵母脂肪酶催化蓖麻油水解的活性

研究了二(2-乙基己基)琥珀酸磺酸钠(AOT)/Triton X-100混合反胶束体系中假丝酵母脂肪酶(candida rugosa lipase)催化蓖麻油水解的反应. 考察了Triton X-100占总表面活性剂的摩尔分数(x(Triton X-100))、水与总体表面活性剂的摩尔比(ω0)、pH值、反应温度以及底物蓖麻油的浓度等因素对酶活性的影响. 研究结果表明, 加入非离子表面活性剂Triton X-100可以使假丝酵母脂肪酶的活性得到显著提高, 但是当底物蓖麻油的浓度大于0.24 mol·L-1时, 会对假丝酵母脂肪酶产生抑制作用.     

Radiolabeled AOT for studies of the partitioning of the surfactant during protein extraction by means of reverse micellar two-phase systems

Knowledge about the distribution of surfactants between aqueous and reverse micellar phases as well as the association of surfactants with proteins are of major importance for assessing the practical feasibility of protein extraction by means of reverse micellar systems. The question of the fate of the surfactant has been addressed for the classical reverse micellar system based on brine/AOT/issoctane. For this purpose, AOT (Aerosol OT, di-2-ethyl-1-hexyl sulfosuccinate) was synthesized in the presence of sulfite radioactively labeled with the isotope³⁵S. The synthesis of [³⁵S]AOT as well as its use for tracer analysis in protein extraction are discussed.     

Nonionic surfactants: a key to enhance the enzyme activity at cationic reverse micellar interface

The primary objective of the present study is to understand how the different nonionic surfactants modify the anisotropic interface of cationic water-in-oil (W/O) microemulsions and thus influences the catalytic efficiency of surface-active enzymes. Activity of Chromobacterium viscosum lipase (CV-lipase) was estimated in several mixed reverse micelles prepared from CTAB and four different nonionic surfactants, Brij-30, Brij-92, Tween-20, and Tween-80/water/isooctane/n-hexanol at different z ([cosurfactant]/[surfactants]) values, pH 6 (20 mM phosphate), 25 degrees C across a varying range of W0 ([water]/[surfactants]) using p-nitrophenyl-n-octanoate as the substrate. Lipase activity in mixed reverse micelles improved maximum up to approximately 200% with increasing content of non-ionic surfactants compared to that in CTAB probably due to the reduced positive charge density as well as plummeted n-hexanol (competitive inhibitor of lipase) content at the interfacial region of cationic W/O microemulsions. The highest activity of lipase was observed in CTAB (10 mM) + Brij-30 (40 mM)/isooctane/n-hexanol)/water system, k2 = 913 +/- 5 cm3 g-1 s-1. Interestingly, this observed activity is even higher than that obtained in sodium bis (2-ethyl-1-hexyl) sulfosuccinate (AOT)/n-heptane reverse micelles, the most popular W/O microemulsion in micellar enzymology. To ascertain the influence of non-ionic surfactants in improving the activity of surface-active enzymes is not limited to lipase only, we have also investigated the catalytic activity of Horseradish peroxidase (HRP) in different mixed W/O microemulsions. Here also following the similar trend as observed for lipase, HRP activity enhanced up to 2.5 fold with increasing concentration of nonionic surfactants. Finally, the enzyme activity was correlated with the change in the microenvironment of mixed reverse micelles by steady-state fluorescence study using 8-anilino-1-napthalenesulphonic acid (ANS) as probe.     

Atmospheric and electrochemical oxidation of ascorbic acid in anionic,nonionic and cationic surfactant systems

It is well known that the antioxidant activity of some species in homogenous solutions may not be the same as that in heterogeneous media. This environment dependence is the reason for investigating ascorbic acid antioxidant activity in surfactant solutions. In our study we have investigated the kinetics of atmospheric oxidation and electrochemical oxidation of ascorbic acid in aqueous solutions of the four surfactants: SDS, AOT (anionic), TRITON-100 (nonionic), and CTAB (cationic). For each surfactant the concentrations below and above CMC were investigated. As expected, a general trend in the atmospheric oxidation rate changes in the following manner: the micellar solution of nonionic surfactant shows a faster oxidation rate than that of the anionic surfactant, and the cationic surfactant an even higher one. The more subtle effects were observed with each surfactant concentration change. The influence of the surfactants on the electrochemical behavior of ascorbic acid was also studied. A general conclusion emerging from our investigation is that surfactants shift the ascorbic acid oxidation potential and change the peak current value. This phenomenon is due mainly to the surfactant film formed at the electrode/solution interface.     

Synergism and foaming properties in mixed nonionic/fatty acid soap surfactant systems

The synergism and foaming behavior of a mixed surfactant system consisting of a nonionic surfactant (polyethoxylated alkyl ether C(n)E(m)) and a fatty acid soap (sodium oleate) were studied. The micellar interaction parameter (the beta-parameter) was determined from the cmc following the approach of Rubingh's regular solution theory. For both the C(12)E(6)/sodium oleate and the C(14)E(6)/sodium oleate mixtures, the results indicate a fairly strong attractive interaction (negative beta-values), which were in agreement with previous data reported for other nonionic/anionic surfactant systems. The characteristics of the foam produced from the surfactants were evaluated using a glass column equipped with a series of electrodes measuring the conductance of the foam, which enabled the water content of the foam to be determined. From these measurements, since the total foam volume was almost the same for all concentrations and surfactants, we compared the amount of liquid in the foam produced under dynamic foaming and the ability of the foam to entrain the liquid after the airflow was switched-off (static foam stability). The amount of liquid in the foam 100 s after the air was switched-off followed the order NaOl > C(12)E(6) > C(14)E(6). Also, the mixtures had the same foam volumes as the pure surfactants at the same concentration. However, both mixtures had higher concentrations of liquid in the foam when the mole fraction of the nonionic surfactant in the mixed surfactant system was greater than about >0.3 in the solution.     

混合表面活性剂在非极性溶剂中的聚集行为

表面活性剂在非极性溶剂中的聚集行为比在水溶液中复杂得多. 水溶液中表面活性剂有一明确的临界胶束浓度(CMC),而在非极性溶剂中至今对CM C概念仍有怀疑^[1], 但已有多种手段如染料增溶法、水增溶法、光散射法、荧光偏振、紫外和核磁共振谱等证实并测定了非极性溶剂中 CMC 的存在^[1～5]. 表面活性剂在非极性溶剂中以非离子化状态存在, 其缔合主要靠两亲分子之间的偶极-偶极以及离子对相互作用, 那么在一种表面活性剂溶液中加入另一种表面活性剂, 即表面活性剂的复配, 必然对其聚集行为产生重大影响, 但迄今为止, 尚未见关于混合表面活性剂在非极性溶剂中聚集行为的报道. 本文采用碘光谱法和水增溶法测定了阴离子表面活性剂AOT 和非离子表面活性剂 Brij30 混合后在正庚烷中形成反胶束的 CMC, 以期考察表面活性剂的复配对其聚集行为的影响。     

The Viscous Properties of Anionic/Cationic and Cationic/Nonionic Mixed Surfactant Systems

The behavior of mixed cationic/anionic and cationic/nonionic surfactants solutions have been studied by viscosimetry. The systems studied were sodium dodecyl sulfate (SDS)/cetyltrimethylammonium bromide (CTAB) and CTAB/Brij (polyoxyethylene lauryl ether, n = 10 and 23) in aqueous and sodium chloride solutions. The relative viscosity of single nonionic surfactant solutions is larger than that of SDS or CTAB solutions. It increases with the number of ethylene oxide groups. In the mixed systems, viscosity deviates from ideal behavior. The deviation results from electrostatic interactions. The surfactant mixture composition affects the self-assembled microstructure and rheology. A new mixed system that forms clear micellar solution above CMC was detected. In CTAB/Brij systems, the experimental data also deviate from ideal behavior due to mixed micelle formation and electroviscous effect. This effect is less pronounced than that of SDS/CTAB system and could be suppressed by adding an electrolyte (NaCl).     

Microstructure of un-neutralized hydrophobically modified alkali-soluble emulsion latex in different surfactant solutions

At low pH conditions and in the presence of anionic, cationic, and nonionic surfactants, hydrophobically modified alkali-soluble emulsions (HASE) exhibit pronounced interaction that results in the solubilization of the latex. The interaction between HASE latex and surfactant was studied using various techniques, such as light transmittance, isothermal titration calorimetry, laser light scattering, and electrophoresis. For anionic surfactant, noncooperative hydrophobic binding dominates the interaction at concentrations lower than the critical aggregation concentration (CAC) (C < CAC). However, cooperative hydrophobic binding controls the formation of mixed micelles at high surfactant concentrations (C > or = CAC), where the cloudy solution becomes clear. For cross-linked HASE latex, anionic surfactant binds only noncooperatively to the latex and causes it to swell. For cationic surfactant, electrostatic interaction occurs at very low surfactant concentrations, resulting in phase separation. With further increase in surfactant concentration, noncooperative hydrophobic and cooperative hydrophobic interactions dominate the binding at low and high surfactant concentrations, respectively. For anionic and cationic surfactant systems, the CAC is lower than the critical micelle concentration (CMC) of surfactants in water. In addition, counterion condensation plays an important role during the binding interaction between HASE latex and ionic surfactants. In the case of nonionic surfactants, free surfactant micelles are formed in solution due to their relatively low CMC values, and HASE latexes are directly solubilized into the micellar core of nonionic surfactants.     

Micellization and synergistic interaction of binary surfactant mixtures based on sodium nonylphenol polyoxyethylene ether sulfate

Mixed micelle formation and synergistic interactions of binary surfactant combinations of sodium nonylphenol polyoxyethylene ether sulfate (NPES) with typical surfactants such as sodium dodecyl sulfate (SDS), Triton X-100 (TX100), cetyl trimethyl ammonium bromide (CTAB), and sodium bis(2-ethylhexyl) sulfosuccinate (AOT) at 25 degrees C in the presence of NaCl have been investigated. The critical micelle concentration of the binary mixtures has been quantitatively estimated by steady-state fluorescence measurements. The micellar characteristics such as composition, activity coefficients, and mutual interaction parameters have been estimated following different theoretical treatments. Investigation on the micellization and synergistic interaction of NPES with four kinds of surfactants showed that the behavior of the binary mixture deviated from the ideal state. The analysis revealed that the interaction parameter values (beta) varied with variation of solvent composition. Besides the strong electrostatic attraction between the oppositely charged surfactant NPES-CTAB mixture, the interaction between NPES and SDS also showed far more deviation from ideal behavior than that of TX100 and AOT. The reason for the synergism is also discussed and the results show that an ionic and a nonionic surfactant character existed concurrently in NPES due to the combination of a sulfate group and polyoxyethylene as a hydrophilic moiety. Zeta potential and diffusion coefficient measurements of micelles confirmed the synergistic interaction between the binary surfactants.     

The microstructure of di-alkyl chain cationic/nonionic surfactant mixtures: observation of coexisting lamellar and micellar phases and depletion induced phase separation

The evolution of the microstructure and composition occurring in the aqueous solutions of di-alkyl chain cationic/nonionic surfactant mixtures has been studied in detail using small angle neutron scattering, SANS. For all the systems studied we observe an evolution from a predominantly lamellar phase, for solutions rich in di-alkyl chain cationic surfactant, to mixed cationic/nonionic micelles, for solutions rich in the nonionic surfactant. At intermediate solution compositions there is a region of coexistence of lamellar and micellar phases, where the relative amounts change with solution composition. A number of different di-alkyl chain cationic surfactants, DHDAB, 2HT, DHTAC, DHTA methyl sulfate, and DISDA methyl sulfate, and nonionic surfactants, C12E12 and C12E23, are investigated. For these systems the differences in phase behavior is discussed, and for the mixture DHDAB/C12E12 a direct comparison with theoretical predictions of phase behavior is made. It is shown that the phase separation that can occur in these mixed systems is induced by a depletion force arising from the micellar component, and that the size and volume fraction of the micelles are critical factors.     

Electrophoretic behaviour and viscosities of metal oxides in mixed surfactant systems

 The electrokinetic behavior and viscosity of anatase and alumina in mixed-surfactant solutions were investigated. Sodium dodecylsulfate and nonionic polyoxyethylene ethers were investigated as model surfactants. Pure nonionic surfactants adsorbed on anatase and coated the particles, so that the zeta potential was nearly zero near the critical micelle concentration of surfactant. At higher surfactant concentrations, an increase in the zeta potentials was observed, suggesting a change in the microstructure of the adsorbed layer. Addition of nonionic surfactant to positively charged anatase and alumina with some preadsorbed sodium dodecylsulfate reversed the surface charge of the oxide to negative, indicating enhanced coadsorption of the anionic surfactant. At higher concentrations of the nonionic surfactant, the charge reversed back to positive. Nonionic surfactants did not reverse the surface charge of these oxides in the absence of the anionic surfactant. Coenhanced adsorption of nonionic and anionic surfactants was used to stabilize alumina at the isoelectric point, where neither surfactant adsorbed appreciably on its own. These results suggest a dramatic change in conformation of the surfactant chains in mixed systems. Further explanation and justification of the proposed changes in adsorbed surfactant conformation require spectroscopic evidence. Received: 12 March 1997 Accepted: 22 July 1997     

Physicochemical investigations of microemulsification of eucalyptus oil and water using mixed surfactants (AOT+Brij-35) and butanol

Microemulsification of a vegetable oil (eucalyptus) with single and mixed surfactants (AOT and Brij-35), cosurfactant of different lipophilicities (isomers of butanol), and water were studied at different surfactant and cosurfactant mixing ratios. The phase diagrams of the quaternary systems were constructed using unfolded and folded tetrahedron, wherein the phase characteristics of different ternary systems can be underlined. The microemulsion zone was found to be dependent upon the mixing ratios of surfactant and cosurfactant; the largest microemulsion zone was formed with 1:1 (w/w) S:CS. The effects of temperature and additives (NaCl, urea, glucose, and bile salts of different concentrations) on the phase behavior were examined. The mixed microemulsion system showed temperature insensitivity, whereas the Brij-35 (single) stabilized system exhibited a smaller microemulsion zone at elevated temperature. NaCl and glucose increased the microemulsion zone up to a certain concentration, beyond which the microemulsion zones were decreased. These additives decreased the microemulsion zones as temperature was increased. The effect of urea on microemulsion zone was found to be insignificant even at the concentration 3.0 mol dm(-3). Little effect on microemulsion zone was shown by NaC (sodium cholate) at 0.25 and 0.5 mol dm(-3) at different temperatures. The conductance of the single (AOT) and mixed microemulsion system (AOT+Brij-35) depends upon the water content and mixing ratios of the surfactants, and a steep rise in conductance was observed at equal weight percentages of oil and water. Viscosities for both single (AOT) and mixed (AOT+Brij-35) surfactant systems passed through maxima at equal oil and water regions showing structural transition. The viscosities for microemulsion systems increased with increasing Brij-35 content in the AOT+Brij-35 blend. Conductances and viscosities of different monophasic compositions in the absence and presence of additives (NaCl and NaC) were measured at different temperatures. The activation energy of conduction (DeltaE(cond)( *)) and the activation enthalpy for viscous flow (DeltaH(vis)( *)) were evaluated. It was found that both DeltaE(cond)( *) and DeltaH(vis)( *) were a function of the nature of the dispersion medium. Considering the phase separation point of maximum solubility, the free energy of dissolution of water or oil (DeltaG(s)(0)) at the microdispersed state in amphiphile medium was estimated and found to be a function of surfactant composition.     

Micelle nano-reactors as mediators of water-insoluble ligand complexation with Cu(II) ions in aqueous medium

Complexation reactions between water-soluble and -insoluble reactants were shown to occur in aqueous media in the presence of normal or reverse surfactant micelles, in significantly higher yields at lower temperatures compared to those achieved in neat organic solvents. The highest yield enhancement in the complexation of novel water-insoluble bis(2-amino-1,3,4-thiadiazolyl)methane and 1,4-bis(2-amino-1,3,4-thiadiazolyl)benzene ligands with Cu(II) ions was achieved in the sodium bis(2-ethylhexyl)sulfosuccinate (AOT)-heptane-water reverse micellar system at the hydration ratio of 15. The results revealed that AOT normal micelles cause a change in the reaction mechanism together with the enhancement of the complex formation. The observed micellar effects were rationalized on basis of the properties of bulk solvents, surfactants and ligands, considering the solvation and hydration ratios of reverse micelles. The results have proved the dependence of complex yield on the amount and accordingly also on the properties of water in the micellar core, indicating that the yield can be maximized by the optimization of the hydration ratio.