Temporal evolution study of the plasma induced by CO2 pulsed laser on targets of titanium oxides

This paper reports studies on time-resolved laser induced breakdown spectroscopy (LIBS) of plasmas induced by IR nanosecond laser pulses on the titanium oxides TiO and TiO₂ (anatase). LIBS excitation was performed using a CO₂ laser. The laser-induced plasma was found strongly ionized yielding Ti⁺, O⁺, Ti^2 +, O^2 +, Ti^3 +, and Ti^4 + species and rich in neutral titanium and oxygen atoms. The temporal behavior of specific emission lines of Ti, Ti⁺, Ti^2 + and Ti^3 + was characterized. The results show a faster decay of Ti^3 + and Ti^2 + ionic species than that of Ti⁺ and neutral Ti atoms. Spectroscopic diagnostics were used to determine the time-resolved electron density and excitation temperatures. Laser irradiation of TiO₂-anatase induces on the surface sample the polymorphic transformation to TiO₂-rutile. The dependence on fluence and number of irradiation pulses of this transformation was studied by micro-Raman spectroscopy.     

Influence of particle size on the photoactivity of Ti/TiO2 thin film electrodes,and enhanced photoelectrocatalytic degradation of indigo carmine dye

Photoanodes based on Ti/TiO₂ thin films were prepared by the sol–gel method, using either tetraisopropoxide (Ti(OPri)₄) or modified tetraisopropoxide, producing electrodes with different sized nanoparticle coatings, termed nanoporous (20 nm) or nanoparticulated (10 nm) electrodes. The anatase form dominated the composition of the nanoparticulated electrode, which presented a higher surface area, a flat band potential shift of ?160 mV and a 50% improvement in photoactivity, compared to the nanoporous electrode. 100% color removal, and 75% mineralization, of indigo carmine dye were achieved after 15 min of photoelectrocatalytic treatment using a nanoparticulated Ti/TiO₂ electrode operated at a current density of 0.4 mA cm^?2. Our findings indicate that the use of nanoparticulated electrodes, under UV irradiation and with controlled current density, is an efficient alternative for the removal of food dye contaminants during wastewater treatment.     

Electrochemical performance of a three-layer electrode based on Bi nanoparticles,multi-walled carbon nanotube composites for simultaneous Hg(II) and Cu(II) detection

Electrochemical analysis is a promising technique for detecting biotoxic and non-biodegradable heavy metals. This article proposes a novel composite electrode based on a polyaniline (PANi) framework doped with bismuth nanoparticle@graphene oxide multi-walled carbon nanotubes (Bi NPs@GO-MWCNTs) for the simultaneous detection of multiple heavy metal ions. Composite electrodes are prepared on screen-printed electrodes (SPCEs) using an efficient dispensing technique. We used a SM200SX-3A dispenser to load a laboratory-specific ink with optimized viscosity and adhesion to draw a pattern on the work area. The SPCE was used as substrate to facilitate cost-effective and more convenient real-time detection technology. Electrochemical techniques, such as cyclic voltammetry and differential pulse voltammetry, were used to demonstrate the sensing capabilities of the proposed sensor. The sensitivity, limit of detection, and linear range of the PANi-Bi NPs@GO-MWCNT electrode are 2.57 × 10² μA L μmol⁻¹ cm⁻², 0.01 nmol/L, and 0.01 nmol/L–5 mmol/L and 0.15 × 10⁻¹ μA L μmol⁻¹ cm⁻², 0.5 nmol/L, and 0.5 nmol/L–5 mmol/L for mercury ion (Hg(II)) and copper ion (Cu(II)) detection, respectively. In addition, the electrode exhibits a good selectivity and repeatability for Hg(II) and Cu(II) sensing when tested in a complex heavy metal ion solution. The constructed electrode system exhibits a detection performance superior to similar methods and also increases the types of heavy metal ions that can be detected. Therefore, the proposed device can be used as an efficient sensor for the detection of multiple heavy metal ions in complex environments.     

Microfluidic cell with a TiO2-modified gold electrode irradiated by an UV-LED for in situ photocatalytic decomposition of organic matter and its potentiality for voltammetric analysis of metal ions

A novel microreactor for TiO₂-assisted photocatalysis in a microfluidic electrochemical cell was designed and constructed by a technology that can be reproduced in any chemical laboratory. The cell is obtained by a two-step thermal transfer of laser printed masks onto gold CD-Rs, a subtractive one to define the electrodes, and an additive one to define the channels. The TiO₂ nanoparticles are physically embedded in a gold matrix by electrodeposition from a solution of ions of this metal also containing colloidal suspension of anatase. This modification is conducted in the assembled microfluidic cell, with minimum material and time consumption. A 100 mW UV-LED (365 nm) is focused on the modified electrode and irradiation of the sample in the thin layer microreactor is conducted under stopped flow condition. The Cu–EDTA complex served as model system to demonstrate the in situ photocatalytic digestion of organic matter followed by the voltammetric determination of the metal ion in aqueous solution. The voltammetric wave of 1.0 × 10⁻³ mol L⁻¹ Cu(II) in acetate buffer (pH 4.7) at the gold electrode is suppressed by EDTA in the −0.3 to 0.8 vs. Ag/AgCl region. Irradiation of the bare electrode at 365 nm does not recover the wave, while irradiation of the TiO₂-modified gold electrode causes the recovery of the copper wave, proving the photocatalytic destruction of the chelating agent. Diffusion transport to/from the modified electrode rapidly enrolls the whole volume of sample in the thin-layer above the electrode (about 19 nL), so that in less than four minutes the recorded voltammogram become indistinguishable from that of a copper ion solution without EDTA. This novel in situ sample pre-treatment approach is very promising, deserving further research aiming its integration in micro-TAS.     

Photocurrent generated on a carotenoid-sensitized TiO2 nanocrystalline mesoporous electrode

Photocurrent was observed upon monochromatic illumination of an ITO electrode coated with a TiO₂ nanocrystalline mesoporous membrane with carotenoid 8′-apo-β-caroten-8′-oic acid (ACOA) deposited as a sensitizer (illuminated area 0.25 cm²) and immersed in an aqueous 10 mM hydroquinone (H₂Q), 0.1 M NaH₂PO₄ solution (pH = 7.4) purged with argon, using a platinum flag counter electrode (area 3.3 cm²) and a SCE reference electrode. The carotenoid-sensitized short-circuit photocurrent reached 4.6 μA/cm² upon a 40 μW/cm² incident light beam at 426 nm, with an IPCE (%, incident monochromatic photon-to-photocurrent conversion efficiency) as high as 34%. The short-circuit photocurrent was stable during 1 h of continuous illumination with only a 10% decrease. An open-circuit voltage of 0.15 V was obtained (upon 426 nm, 40 μW/cm² illumination) which remained at a constant value for hours. The observed open-circuit voltage is close to the theoretical value (0.22 V) expected in such a system. The action spectrum resembled the absorption spectrum of ACOA bound on the TiO₂ membrane with a maximum near 426 nm. No decay of the ACOA on the TiO₂ surface was observed after 12 h, presumably because of rapid regeneration of ACOA from ACOA⁺ at the surface by electron transfer from H₂Q.     

A sensitivity-controlled hydrogen peroxide sensor based on self-assembled Prussian Blue modified electrode

In this communication, a hydrogen peroxide (H₂O₂) sensor based on self-assembled Prussian Blue (PB) modified electrode was reported. Thin film of PB was deposited on the electrode by self-assembly process including multiple sequential adsorption of ferric ions and hexacyanoferrate ions. The as-prepared PB modified electrode displayed sufficient stability for practical sensing application. At an applied potential of ?0.05 V vs. Ag/AgCl (sat. KCl), PB modified electrode with 30 layers exhibited a linear dependence on H₂O₂ concentration in the range of 1 × 10^?6–4 × 10^?4 M (r = 0.9998) with a sensitivity of 625 mA M^?1 cm^?2. It was found that the sensitivity of H₂O₂ sensors could be well controlled by adjusting the number of deposition cycles for PB preparation. This work demonstrates the feasibility of self-assembled PB modified electrode in sensing application, and provides an effective approach to control the sensitivity of PB-based amperometric biosensors.     

Spectroscopic properties of RBiBO4 (R = Ca,Sr) glasses doped with TiO2

Transparent glasses, melt quenching derived, containing 10RO·20Bi₂O₃·(70 ? x)B₂O₃·xTiO₂ [R = Ca, Sr] with x = 0, 0.5, 1.0 wt% were characterized by X-ray powder diffraction. Physical and spectroscopic properties viz., density, absorption, emission, electron paramagnetic resonance (EPR) and FTIR were investigated. The absorption band around 823 nm in pure glass samples is attributed to the electronic transition of ³P₀ to ³P₂ of Bi⁺ radicals. A small absorption hump centered around 609 nm is found in all doped glasses due to ²T_2g to ²E_g transition of octahedral Ti³⁺ ions. The emission results revealed that all the samples exhibit a broad emission band covering entire visible-light range, with λ_ex = 360 nm, centered 470–520 nm corresponds to electronic transition of ³P₁ to ¹S₀ of Bi³⁺ ions, therefore the present materials can be potentially used as tunable or full-color display systems. And a strong emission around 706 nm with λ_ex = 514 nm due to transition of ²P_3/2 to ²P_1/2 of Bi²⁺ ions. In SrO mixed glasses Ti⁴⁺ ions effect the environment of Bi³⁺ ion symmetry units from C₂ to C_3i. A small EPR signal (at room temperature) is observed in titanium doped glasses due to Ti³⁺ ions. In both the series with increase of TiO₂ concentration BO₄ units are gradually converted into BO₃ units and new cross linkages are formed, like B–O–Ti, Bi–O–Ti at the expense of B–O–B bonds.     

An insight to the filtration mechanism of Pb(II) at the surface of a clay ceramic membrane through its preconcentration at the surface of a graphite/clay composite working electrode

The use of cyclic voltammetry (CV) and linear scan anodic stripping voltammetry (LSASV) to predict the selectivity of microfiltration ceramic membranes made from a lump of local clay towards Pb(II) ions filtration is described. The membranes were characterized by different techniques followed by CV analysis of the Fe(CN)₆^3-/Fe(CN)₆^4- redox couple and Pb(II) on bare graphite, raw clay, and clay-modified carbon paste electrode (clay-modified CPE). The effect of clay loading in the range of 1–10 % (w/w) on the electrodes is studied, where an enhanced peak current is observed for 5 % w/w clay. Moreover, a decrease in the peak current can be seen for bare graphite electrodes, suggesting that the clay mineral had played a substantial role in the sieving of heavy metal ions through the ceramic membrane. The electroactive surface area of 5% w/w raw clay towards Fe(II) ions was found to be in the order of 3.07 × 10^-2 cm² and higher than 5% w/w clay sintered to 1000 °C and bare graphite. CV analysis shows that both, 5 % w/w raw clay and 5 % w/w clay sintered to 1000 °C exhibited high peak currents towards Pb(II) ions. The mobility of the Pb(II) ions is found to increase when 5% w/w clay sintered to 1000 °C is utilized as membrane/electrode, leading to an increase in the amount of reduced Pb(II) ions on the surfaces of the clay membranes/electrodes. The study suggests successful filtration of Pb(II) ions through the proposed membrane/electrode and a much better accumulation than Fe(II) at the surface of the membrane/electrode before being subjected to filtration.     

Synthesis of thick TiO2 nanotube arrays on transparent substrate by anodization technique

A vertically aligned transparent TiO₂ nanotube array (tTNA) of significantly enhanced tube-length 6.3 ± 0.3 µm was successfully synthesized on glass substrates by anodization technique with ammonium fluoride and ethylene glycol-based electrolyte. Prior to anodization, Ti metal was deposited on glass substrate by facing-target sputtering technique with various sputtering pressures at substrate temperature 420 °C to find out the relation between the structural properties of the Ti layer and the corresponding growth mechanism of the TiO₂ nanotube. The study revealed that structural properties of Ti metal layers and its adhesion to the glass substrate, which can be tuned by deposition parameters, play an important role in the process of tTNA formation.     

A binder-free thin film anode composed of Co2 +-intercalated buserite grown on carbon cloth for oxygen evolution reaction

We present a binder-free catalytic anode for highly efficient and stable oxygen evolution reaction in alkaline media. The catalyst consists of a thin film of buserite-type layered manganese dioxide (MnO₂) intercalated with Co^2 + ions, resulting from electrodeposition of the layered MnO₂ film with tetrabutylammonium (Bu₄N⁺) ions on a carbon cloth, followed by ion-exchange of the initially incorporated Bu₄N⁺ with Co^2 + in solution. The electrode is capable to produce a current density of 10 mA cm^− 2 at an overpotential (η) of 377 mV with a Tafel slope of 48 mV dec^− 1, much superior to the layered MnO₂ without Co^2 +.     

Zeptomolar detection of Hg2 + based on label-free electrochemical aptasensor: One step closer to the dream of single atom detection

An ultra-sensitive and highly selective electrochemical label-free aptasensor is proposed for the quantitation of Hg^2 + based on the hybridization/dehybridization of double-stranded DNA (dsDNA) on a gold electrode. Thiol-substituted single-stranded DNA (ssDNA) is self-assembled on the gold electrode surface through the SAu interaction. The hybridization of ssDNA with complementary DNA (cDNA) and the consequences of dehybridization in the presence of mercury ions are followed through differential pulse voltammetry (DPV) responses using a [Fe(CN)₆]^{3 −/4 −} redox probe. The formation of a thymine–Hg^2 +–thymine (T–Hg^2 +–T) complex is the key to producing a highly selective and sensitive aptasensor for Hg^2 + determination. Specifically, the present electrochemical aptasensor is able to quantify Hg^2 + ions in concentrations from 5 zeptomolar (zM) to 55 picomolar (pM) with a limit of detection of 0.6 zM, close to the dream of single atom detection, without requiring a complicated procedure or expensive materials.     

Needle-like IrO/Ag combined pH microelectrode

In this study, a combined pH microelectrode has been developed consisting of an indicator electrode made of IrO₂ prepared using the polymeric precursor method and deposited in a platinum microwire. This electrode was mounted inside a stainless steel needle, the external surface of which was painted with conductive silver ink which is used as reference electrode. This device was compared with a conventional glass electrode, and the results presented linear behavior in the pH range from 2.0 to 12.5, in Na⁺ and K⁺ solutions, exceeding glass electrodes in the alkaline range. The sensitivity was 56.9 ± 0.2 mV pH^? 1 and using ANOVA test we conclude that the electrode is not sensitive to the presence of alkaline cations such as Li⁺, Na⁺ or K⁺. Finally, the response time (t₉₅) was 4.9 to 9.0 s depending on the solution pH. The combined pH microelectrode can be used several times and, after three years, continues to have a response similar to that of a freshly produced one.     

Novel synthesis of high-surface-area ordered mesoporous TiO2 with anatase framework for photocatalytic applications

Ordered mesoporous TiO₂ materials with an anatase frameworks have been synthesized by using a cationic surfactant cetyltrimethylammonium bromide (C₁₆TMABr) as a structure-directing agent and soluble peroxytitanates as Ti precursor through a self-assembly between the positive charged surfactant S⁺ and the negatively charged inorganic framework I^? (S⁺I^? type). The low-angle X-ray diffraction (XRD) pattern of the as-prepared mesoporous TiO₂ materials indicates a hexagonal mesostructure. XRD and transmission electron microscopy results and nitrogen adsorption–desorption isotherms measurements indicate that the calcined mesoporous TiO₂ possesses an anatase crystalline framework having a maximum pore size of 6.9 nm and a maximum Brunauer–Emmett–Teller specific surface area of 284 m² g^?1. This ordered mesoporous anatase TiO₂ also demonstrates a high photocatalytic activity for degradation of methylene blue under ultraviolet irradiation.     

Visible LED light photoelectrochemical sensor for detection of L-Dopa based on oxygen reduction on TiO2 sensitized with iron phthalocyanine

The present work describes the development of a new strategy to photoelectrochemical detection of L-Dopa at low potential based on oxygen reduction on TiO₂ sensitized with iron phthalocyanine (FePc/TiO₂). The FePc/TiO₂ composite shows a photocurrent 10-fold higher than that of pure TiO₂ nanoparticles and it was 4-fold higher than that of FePc exploiting visible light. The band gaps of pure TiO₂ nanoparticles, FePc and FePc/TiO₂, calculated according to the Kubelka–Munk equation, were 3.22 eV, 3.11 eV and 2.82 eV, respectively. The FePc/TiO₂ composite showed a low charge transfer resistance in comparison to the photoelectrode modified with FePc or TiO₂. Under optimized conditions, the photoelectrochemical sensor shows a linear response range from 20 up to 190 μmol L^− 1 with a sensitivity of 31.8 μA L mmol^− 1 and limit of detection of 1.5 μmol L^− 1 for the detection of L-Dopa.     

Nanocrystalline bioactive TiO2–chitosan impedimetric immunosensor for ochratoxin-A

Fourier transform infrared (FT-IR) and UV-visible spectroscopy were used to optimize TiO₂ concentration in chitosan (CS) to develop a sensitive CS/TiO₂ bioactive electrode. Electrochemical impedance spectroscopy (EIS) used to measure electro-activity of these bioactive electrodes associated with enhance oligosaccharide containing –CO groups from degradation of CS molecules. This matrix has free –NH₂ and –OH functional groups due to higher probability of hydrogen and covalent bonding between –OH group in CS molecules with Ti–O–Ti which supported immobilization of rabbit antibodies (IgGs) and proteins. Ochratoxin A (OTA) was detected and showed a linear response up to 10 ng/mL with CS/TiO₂ bio-electrode. The OTA detection sensitivity of 7.5 mM TiO₂ added CS bioactive electrode was four times higher than only CS.     

Operando soft x-ray emission spectroscopy of LiMn2O4 thin film involving Li–ion extraction/insertion reaction

We developed an electrochemical in situ cell for soft x-ray emission spectroscopy (XES) to accurately investigate the redox reaction and electronic structure of transition metals in the cathode materials for Li–ion battery. The in situ cell consists of a Li–metal counter electrode, an organic electrolyte solution, and a cathode on a membrane window which separates the liquid electrolyte from high vacuum and can pass the incoming and emitted photons. In this study, the Mn 3d electronic structure of LiMn₂O₄ thin-film electrode was clarified by the operando XES. At the charged state, the XES spectrum changed significantly from the open-circuit-voltage (OCV) state, suggesting oxidation of the Mn^3 + component through Li–ion extraction. Upon discharge up to 3.0 V vs. Li/Li⁺, the XES spectrum almost returned to its profile at the OCV state with small difference, indicating the valence change of Mn: Mn^3.6 + → Mn^4 + → Mn^3.3 + corresponding to the OCV, charged, and discharged states.     

Simultaneous growth of rutile TiO2 as 1D/3D nanorod/nanoflower on FTO in one-step process enhances electrochemical response of photoanode in DSSC

Simultaneous growth of 1D/3D-nanorod/nanoflower like structures of TiO₂ on fluorine doped tin oxide (FTO) glass substrates has been achieved in one-step hydrothermal process. X-ray diffraction (XRD) pattern confirms the formation of rutile phase whereas enhanced light scattering in 1D/3D nanorod/nanoflower TiO₂ photoanode was observed at longer wavelengths of 600–750 nm. Dye sensitized solar cell (DSSC) prepared with 1D/3D-nanorod/nanoflower structures had about 90% increases in efficiency as compared to 1D nanorod like structure. Thus, simultaneous assembly of TiO₂ as 1D/3D-nanorod/nanoflower like structure without significant change in their surface oxidation states (Ti^3 + and Ti^4 +) had better capabilities for light harvesting and efficient electron transportation for improving electrochemical responses of photo-electrode in DSSC to achieve higher sensitivity.     

Cathodic carboxylation of gold in thick {Au-CO2}n layers. A model for reversible electrochemical sequestration of CO2

Catalytic reduction of CO₂ (saturated in organic polar solvents, e.g. N,N-dimethylfomamide, containing Me₄NX or NaBF₄) was achieved at smooth gold electrodes and at glassy carbon electrodes galvanostatically capped with a thin layer of gold. Under these quite explicit conditions, very sharp reduction steps were observed near − 1.5 V vs. Ag/AgCl. With small cations listed above, an unexpected behavior was observed, a progressive electrode inhibition occurring upon several scans or after a fixed-potential electrolysis at E < − 1.7 V. This phenomenon could be attributed to the insertion of CO₂ into gold, leading to the formation of a thick iono-metallic multi-strata layer (less conducting than pure metal) that grows with the electrode charge. The formation of this new interface is due to the concur of three elements: transient CO₂ anion radical, the metal, and rather small-sized cations (M⁺ = Na⁺ or TMA⁺), the three possibly associated in a form {Au-CO₂⁻,M⁺} apparently very reactive with oxygen, moisture, and with some organic π-acceptors. Upon multi-scans up to − 2.2 V, the thickness of formed layer progressively increases reaching more than 10^− 7 to 10^− 6 mol cm^− 2. Such multi-layers undergo decomposition in the anodic domain at about + 1.7 V liberating CO₂ beforehand trapped in Au. Coulometric analyses demonstrated that insertion (cathodic) and release (anodic) steps are quite equivalent, which permits to consider this process as chemically reversible sequestration of carbon dioxide.     

A new composite electrode of Ni-Ferrite/TiOx/Si(111): Preparations and photoelectrochemical studies

A composite electrode of Ni-ferrite/TiO_x/Si(111) was synthesized by grafting Ni²⁺Fe²⁺Fe³⁺–LDH–TiCl₃ (LDH: Layered Double Hydroxides) on n-Si(111) surface and calcined under 1100 °C. Photoelectric research results indicated that the electrode had good photovoltaic effects in an electrolyte solution containing 7.6 M HI and 0.05 M I₂, while platinum plate was used as counter-electrode. The observed photo-voltages (U_pv) and photocurrent densities (j_pc) of the electrode were at ?0.75 V and 5.35 mA/cm², respectively. Compared with electrodes of oxidized n-Si(111) crystal and n-Si(111) wafer covered by Ni-ferrites, j_pc of the electrode Ni-ferrite/TiO_x/Si(111) was increased greatly.     

On oxoacidic properties and solubilities of beryllium and magnesium oxides in molten (CsCs + KCl + NaCl) eutectic at T = 783 K

Reactions of Be²⁺ and Mg²⁺ with O^2– in molten eutectic mixture (CsCs + KCl + NaCl) (0.455:0.245:0.30) at T = 783 K were studied by a potentiometric method using Pt(O₂)|ZrO₂(Y₂O₃) indicator electrode. Addition of O^2– ions to the melt containing Mg²⁺ results in precipitation of MgO (pK_s,MgO = 11.89 ± 0.3, molality) whereas interaction of Be²⁺ with O^2– is accompanied with sequential formation of Be₂O²⁺ (pK = 15.68 ± 0.5, molality) and precipitation of BeO (pK_s,BeO = 9.62 ± 0.3, molality). On the basis of the obtained and known data pK_s,MgO–T⁻¹ dependence in molten (CsCs + KCl + NaCl) eutectic is constructed. The slope of the said dependence in T/K = (from 583 to 1073) range is in good agreement with the value predicted by the Shreder equation, that extends the range of use of the Shreder equation for predictions of metal oxide solubilities in molten halides.