Surface poisoning during electrocatalytic monosaccharide oxidation reactions at gold electrodes in alkaline medium

In the present study, the surface poisoning of electrocatalytic monosaccharide oxidation reactions at gold electrodes were investigated. In the cyclic voltammetric studies, the electrocatalytic oxidation of aldohexose and aldopentose type monosaccharides, aminosugars, acetyl-glucosamine and glucronamide were observed at gold plate electrodes in alkaline medium. However, in controlled-potential electrolytic studies ranging −0.3 to −0.2 V in reaction solutions, current flows during electrolyses decreased quickly with time, except when glucosamine was used as a substrate.Results from surface enhanced infrared adsorption (SEIRA) spectroscopic measurements at an evaporated gold electrode for the electrocatalytic oxidation of glucose in 0.1 mol dm⁻³ NaOH at −0.3 V and Gaussian simulated spectra indicated that the gluconic acid as a 2-electron oxidation product and/or its analogs adsorbed onto the gold surface. Electrochemical quartz crystal microbalance (EQCM) measurement results, along with surface adsorption results from surface poisoning at the gold electrode during electrolytic reactions, suggested that gluconic acid and/or its analogs adsorbed vertically onto electrode surfaces in a full monolayer packing-like conformation. In the case of the electro oxidation of glucosamine in 0.1 mol dm⁻³ NaOH at −0.2 V, the obtained SEIRA spectra and EQCM results, clearly indicated that the glucosaminic acid as a 2-oxidation glucosamine product did not strongly bind onto the gold electrode surface.     

Effect of inorganic anions on the titanium dioxide-based photocatalytic oxidation of aqueous ammonia and nitrite

In this study, we investigated the effects of four inorganic anions (Cl⁻, SO₄²⁻, H₂PO₄⁻/HPO₄²⁻, and HCO₃⁻/CO₃²⁻) on titanium dioxide (TiO₂)-based photocatalytic oxidation of aqueous ammonia (NH₄⁺/NH₃) at pH ∼ 9 and ∼10 and nitrite (NO₂⁻) over the pH range of 4–11. The initial rates of NH₄⁺/NH₃ and NO₂⁻ photocatalytic oxidation are dependent on both the pH and the anion species. Our results indicate that, except for CO₃²⁻, which decreased the homogeneous oxidation rate of NH₄⁺/NH₃ by UV-illuminated hydrogen peroxide, OH scavenging by anions and/or direct oxidation of NH₄⁺/NH₃ and NO₂⁻ by anion radicals did not affect rates of TiO₂ photocatalytic oxidation. While HPO₄²⁻ enhanced NH₄⁺/NH₃ photocatalytic oxidation at pH ∼ 9 and ∼10, H₂PO₄⁻/HPO₄²⁻ inhibited NO₂⁻ oxidation at low to neutral pH values. The presence of Cl⁻, SO₄²⁻, and HCO₃⁻ had no effect on NH₄⁺/NH₃ and NO₂⁻ photocatalytic oxidation at pH ∼ 9 and ∼10, whereas CO₃²⁻ slowed NH₄⁺/NH₃ but not NO₂⁻ photocatalytic oxidation at pH ∼ 11. Photocatalytic oxidation of NH₄⁺/NH₃ to NO₂⁻ is the rate-limiting step in the complete oxidation of NH₄⁺/NH₃ to NO₃⁻ in the presence of common wastewater anions. Therefore, in photocatalytic oxidation treatment, we should choose conditions such as alkaline pH that will maximize the NH₄⁺/NH₃ oxidation rate.     

Li(4−x)/3Ti(5−2x)/3CrxO4 (0 ≤ x ≤ 0.9) spinels: New negatives for lithium batteries

Members of the spinel solid solution between Li_4/3Ti_5/3O₄ and LiCrTiO₄, i.e., Li_(4−x)/3Ti_(5−2x)/3Cr_xO₄ (0 ≤ x ≤ 0.9), have been investigated as possible negative electrodes for future lithium-ion batteries. Electrochemical behaviour have been studied over the potential range 1–3.5 V vs Li⁺/Li. Results are promising with anodic capacities between 129 and 163 mA h/g with a flat operating voltage at about 1.5 V, which is attributed to the pair Ti⁴⁺/Ti³⁺. The inclusion of Cr³⁺ in the spinel structure enhances the specific capacity. In-situ X-ray diffraction experiments confirm that the reaction proceeds in a topotactic manner.     

Electrochemical cycling of Mg in Mg[TFSI]2/tetraglyme electrolytes

The electrochemical reversibility of magnesium was observed in an electrolyte consisting of 0.5 M Mg[TFSI]₂ in tetraglyme in the presence of a small amount of Mg[BH₄]₂. The cyclic efficiency of the cathodic/anodic process was found to increase initially with [BH₄]⁻ then plateau at about 75% beyond 6 mM in these experiments. This concentration is in the region of that indicated by Karl Fischer analysis of the electrolyte as required of [BH₄]⁻ as a dehydrating agent. Cyclic voltammetry showed the reduction onset potential at approximately − 0.35 V vs. Mg and subsequent oxidation around 0 V vs. Mg. Stable cyclic efficiency of approximately 75% over 500 cycles is demonstrated on a platinum substrate. Mg cycling on magnesium, copper and aluminium substrates all show stable cycling over 500 cycles with cyclic efficiency > 73%.     

One-step fabrication of chitosan–hematite nanotubes composite film and its biosensing for hydrogen peroxide

This work reports on a novel chitosan–hematite nanotubes composite film on a gold foil by a simple one-step electrodeposition method. The hybrid chitosan–hematite nanotubes (Chi–HeNTs) film exhibits strong electrocatalytic reduction activity for H₂O₂. Interestingly, two electrocatalytic reduction peaks are observed at −0.24 and −0.56 V (vs SCE), respectively, one controlled by surface wave and the other controlled by diffusion process. The Chi–HeNTs/Au electrode shows a linear response to H₂O₂ concentration ranging from 1 × 10⁻⁶ to 1.6 × 10⁻⁵ mol L⁻¹ with a detection limit of 5 × 10⁻⁸ mol L⁻¹ and a sensitivity as high as 1859 μA μM⁻¹ cm⁻².     

Thermodynamics of aqueous potassium carbonate,piperazine, and carbon dioxide

CO₂ solubility was measured in a wetted-wall column in 0.6–3.6 molal (m) piperazine (PZ) and 2.5–6.2 m potassium ion (K⁺) at 40–110 °C. Piperazine speciation was determined using ¹H NMR for 0.6–3.6 m piperazine (PZ) and 3.6–6.2 m potassium ion (K⁺) at 25–70 °C. The capacity of CO₂ in solution increases as total solute concentration increases and compares favorably with estimates for 7 m (30 wt.%) monoethanolamine (MEA). The presence of potassium in solution increases the concentration of CO₃²⁻/HCO₃⁻ in solution, buffering the solution. The buffer reduces protonation of the free amine, but increases the amount of carbamate species. These competing effects yield a maximum fraction of reactive species at a potassium to piperazine ratio of 2:1.A rigorous thermodynamic model was developed, based on the electrolyte nonrandom two-liquid (ENRTL) theory, to describe the equilibrium behavior of the solvent. Modeling work established that the carbamate stability of piperazine and piperazine carbamate resembles primary amines and gives approximately equal values for the heats of reaction, ΔH_rxn (18.3 and 16.5 kJ/mol). The pK_a of piperazine carbamate is twice that of piperazine, but the ΔH_rxn values are equivalent (∼−45 kJ/mol). Overall, the heat of CO₂ absorption is lowered by the formation of significant quantities of HCO₃⁻ in the mixed solvent and strongly depends on the relative concentrations of K⁺ and PZ, ranging from −40 to −75 kJ/mol.     

VO2 nano-sheet negative electrodes for lithium-ion batteries

Vanadium dioxide (VO₂) nano-sheets were directly synthesized via a continuous hydrothermal process and were investigated as electrodes in a wide potential range of 0.05–3 V vs. Li/Li⁺. The nano-sheets showed excellent capacity retention, with a specific capacity of 350 mAh g^− 1 at an applied current of 0.1 A g^− 1 and 95 mAh g^− 1 at 10 A g^− 1. Further electrochemical testing suggested that a significant proportion of the charge storage in the cells was due to pseudocapacitive processes.     

Thermodynamics of the oxidation–reduction reaction {2 glutathionered(aq) + NADPox(aq)=glutathioneox(aq) + NADPred(aq)}

Microcalorimetry, spectrophotometry, and high-performance liquid chromatography (h.p.l.c.) have been used to conduct a thermodynamic investigation of the glutathione reductase catalyzed reaction {2 glutathione_red(aq) + NADP_ox(aq)=glutathione_ox(aq) + NADP_red(aq)}. The reaction involves the breaking of a disulfide bond and is of particular importance because of the role glutathione_red plays in the repair of enzymes. The measured values of the apparent equilibrium constant K^′ for this reaction ranged from 0.5 to 69 and were measured over a range of temperature (288.15 K to 303.15 K), pH (6.58 to 8.68), and ionic strength I_m (0.091 mol · kg⁻¹ to 0.90 mol · kg⁻¹). The results of the equilibrium and calorimetric measurements were analyzed in terms of a chemical equilibrium model that accounts for the multiplicity of ionic states of the reactants and products. These calculations led to values of thermodynamic quantities at T=298.15 K and I_m=0 for a chemical reference reaction that involves specific ionic forms. Thus, for the reaction {2 glutathione_red⁻(aq) + NADP_ox³⁻(aq)=glutathione_ox²⁻(aq) + NADP_red⁴⁻(aq) + H⁺(aq)}, the equilibrium constant K=(6.5±4.4)·10⁻¹¹, the standard molar enthalpy of reaction Δ_rH^o_m=(6.9±3.0) kJ · mol⁻¹, the standard molar Gibbs free energy change Δ_rG^o_m=(58.1±1.7) kJ · mol⁻¹, and the standard molar entropy change Δ_rS^o_m=−(172±12) J · K⁻¹ · mol⁻¹. Under approximately physiological conditions (T=311.15 K, pH=7.0, and I_m=0.25 mol · kg⁻¹ the apparent equilibrium constant K^′≈0.013. The results of the several studies of this reaction from the literature have also been examined and analyzed using the chemical equilibrium model. It was found that much of the literature is in agreement with the results of this study. Use of our results together with a value from the literature for the standard electromotive force E^o for the NADP redox reaction leads to E^o=0.166 V (T=298.15 K and I=0) for the glutathione redox reaction {glutathione_ox²⁻(aq) + 2 H⁺(aq) + 2 e⁻=2 glutathione_red⁻(aq)}. The thermodynamic results obtained in this study also permit the calculation of the standard apparent electromotive force E^′o for the biochemical redox reaction {glutathione_ox(aq) + 2 e⁻=2 glutathione_red(aq)} over a wide range of temperature, pH, and ionic strength. At T=298.15 K, I=0.25 mol · kg⁻¹, and pH=7.0, the calculated value of E^′o is −0.265 V.     

Raman spectra of carriers in ionic-liquid-gated transistors fabricated with poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene)

We observed the Raman spectra of carriers, positive polarons and bipolarons, generated in a poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT-C14) film by FeCl₃ vapor doping. Electrical conductivity and Raman measurements indicate that the dominant carriers in the conducting state were bipolarons. We identified positive polarons and bipolarons generated in an ionic-liquid-gated transistor (ILGT) fabricated with PBTTT-C14 as an active semiconductor and an ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide [BMIM][TFSI] as a gate dielectric using Raman spectroscopy. The relationship between the source−drain current (I_D) at a constant source−drain voltage (V_D) and the gate voltage (V_G) was measured. I_D increased above −V_G = 1.1 V and showed a maximum at −V_G = 2.0 V. Positive polarons were formed at the initial stage of electrochemical doping (−V_G = 0.8 V). As I_D increased, positive bipolarons were formed. Above V_G = −2.0 V, bipolarons were dominant. The charge density (n), the doping level (x), and the mobility of the bipolarons were calculated from the electrochemical measurements. The highest mobility (μ) of bipolarons was 0.72 cm² V⁻¹ s⁻¹ at x = 110 mol%/repeating unit (−V_G = 2.0 V), whereas the highest μ of polarons was 4.6 × 10⁻⁴ cm² V⁻¹ s⁻¹ at x = 10 mol%.     

Development of micro-tubular SOFCs with an improved performance via nano-Ag impregnation for intermediate temperature operation

Micro-tubular solid-oxide fuel cell consisting of a 10-μm thick (ZrO₂)_0.89(Sc₂O₃)_0.1(CeO₂)_0.01 (ScSZ) electrolyte on a support NiO/(ScSZ) anode (1.8 mm diameter, 200 μm wall thickness) with a Ce_0.8Gd_0.2O_1.9 (GDC) buffer-layer and a La_0.6Sr_0.4Co_0.2Fe_0.8O_3−δ (LSCF)/GDC functional cathode has been developed for intermediate temperature operation. The functional cathode was in situ formed by impregnating the well-dispersed nano-Ag particles into the porous LSCF/GDC layer using a citrate method. The cells yielded maximum power densities of 1.06 W cm⁻² (1.43 A cm⁻², 0.74 V), 0.98 W cm⁻² (1.78 A cm⁻², 0.55 V) and 0.49 W cm⁻² (1.44 A cm⁻², 0.34 V), at 650, 600 and 550 °C, respectively.     

Bioelectrocatalytic formate oxidation and carbon dioxide reduction at high current density and low overpotential with tungsten-containing formate dehydrogenase and mediators

We show a great possibility of mediated enzymatic bioelectrocatalysis in the formate oxidation and the carbon dioxide (CO₂) reduction at high current densities and low overpotentials. Tungsten-containing formate dehydrogenase (FoDH1) from Methylobacterium extorquens AM1 was used as a catalyst and immobilized on a Ketjen Black-modified electrode. For the formate oxidation, a high limiting current density (j_lim) of ca. 24 mA cm^− 2 was realized with a half wave potential (E_1/2) of only 0.12 V more positive than the formal potential of the formate/CO₂ couple (E°′_CO2) at 30 °C in the presence of methyl viologen (MV^2 +) as a mediator, and j_lim reached ca. 145 mA cm^− 2 at 60 °C. Even when a viologen-functionalized polymer was co-immobilized with FoDH1 on the porous electrode, j_lim of ca. 30 mA cm^− 2 was attained at 60 °C with E_1/2 = E°′_CO2 + 0.13 V. On the other hand, the CO₂ reduction was also realized with j_lim ≈ 15 mA cm^− 2 and E_1/2 = E°′_CO2 − 0.04 V at pH 6.6 and 60 °C in the presence of MV^2 +.     

Electrochemical and in-situ X-ray diffraction studies of Ti3C2Tx MXene in ionic liquid electrolyte

2D titanium carbide (Ti₃C₂T_x MXene) showed good capacitance in both organic and neat ionic liquid electrolytes, but its charge storage mechanism is still not fully understood. Here, electrochemical characteristics of Ti₃C₂T_x electrode were studied in neat EMI-TFSI electrolyte. A capacitive behavior was observed within a large electrochemical potential range (from − 1.5 to 1.5 V vs. Ag). Intercalation and de-intercalation of EMI⁺ cations and/or TFSI⁻ anions were investigated by in-situ X-ray diffraction. Interlayer spacing of Ti₃C₂T_x flakes decreases during positive polarization, which can be ascribed to either electrostatic attraction effect between intercalated TFSI⁻ anions and positively charged Ti₃C₂T_x nanosheets or steric effect caused by de-intercalation of EMI⁺ cations. The expansion of interlayer spacing when polarized to negative potentials is explained by steric effect of cation intercalation.     

Measuring solubility of carbon dioxide in aqueous blends of N-methyldiethanolamine and 2-((2-aminoethyl)amino)ethanol at low CO2 loadings and modelling by electrolyte SAFT-HR EoS

In this work, new solubility values for CO₂ absorption in aqueous solutions of N-methyldiethanolamine (MDEA) in the presence of different mole ratios of 2-((2-aminoethyl)amino)ethanol (AEEA) at low pressures are obtained. The total molar amine concentration of all the solutions has been fixed equal to 3.360 mol · L⁻¹ (5.370 mol amine · kg⁻¹ water). The mole ratio of AEEA/MDEA was set to 0.12500, 0.10000 and 0.05000. The experimental total pressure varied from (7.3 to 386.6) kPa and the experimental temperature was set to (313.15, 328.15, 343.15 and 358.15) K. The electrolyte SAFT-HR (eSAFT-HR) equation of state (EoS) (Najafloo et al., 2014) has been successfully applied to model the solubility of CO₂ in aqueous mixtures of AEEA and MDEA. The overall average absolute relative per cent deviation (AAD%) in calculating the total pressure as a function of CO₂ loading is 7.74 for (AEEA + MDEA + CO₂ + H₂O) quaternary system at the four values of temperature. To verify the predictive ability of the model, the eSAFT-HR EoS was extrapolated to the Zoghi and Feyzi (2013) solubility results of the same quaternary system that were obtained at higher pressures or higher CO₂ loadings at the same temperatures. The AAD of the present model is 11.39% lower.     

Molecular spin ladders self-assembly from [Ni(dmit)2]− building blocks: Syntheses,structures and magnetic properties

Two ion-pair compounds, consisting of 1-(4′-R-benzyl)pyridinium ([RBzPy]⁺, R = NO₂ (1) and Br (2)) and [Ni(dmit)₂]⁻ (dmit²⁻ = 2-thioxo-1,3-dithion-4,5-dithiolato), have been synthesized and structurally characterized. The anions of [Ni(dmit)₂]⁻ stack into dimers, which further construct into two-leg ladder through terminal S⋯S interactions in 1, lateral S⋯S interactions in 2. The weak H-bonding interactions of C–H⋯S were observed in 2, while only weak van de Waals interactions between anion and cations in 1. The magnetic susceptibilities measured in 2–300 K indicate AFM exchange interaction domination both two compounds. A peculiar magnetic transition at ∼100 K was observed in 1. An AFM ordering below ∼11 K was found in 2, and the best fit to magnetic susceptibility above 45 K in this compound, using a dimer model with s = 1/2, give rise to Δ/k_B = 36.1 K, zJ = −0.91 K, C = 3.2 × 10⁻³ emu K mol⁻¹ and χ₀ = −4.0 × 10⁻⁶ emu mol⁻¹ with g of 2.0 fixed.     

Nb2O5 nanobelts: A lithium intercalation host with large capacity and high rate capability

In this study, Nb₂O₅ nanobelts, with a ca. ∼15 nm in thickness, ca. ∼60 nm in width and several tens of mircrometers in length, have first been used as the electrode material for lithium intercalation over the potential window of 3.0–1.2 V (vs. Li⁺/Li). It delivers an initial intercalation capacity of 250 mA hg⁻¹ at 0.1 Ag⁻¹ current density, corresponding to x = 2.5 for L_xNb₂O₅, and can still keep relative stable and reaches as large as 180 mA hg⁻¹ after 50 cycles. Surprisingly, the electrodes composed of Nb₂O₅ nanobelts can work smoothly even at high current density of 10 Ag⁻¹, and shows higher specific capacity and excellent cycling stable, as well as sloped feature in voltage profile. Cycling test indicates Nb₂O₅ nanobelts electrode shows a high reversible charge/discharge capacity, high rate capability with excellent cycling stability.     

Electrochemical behavior of CO2 reduction on palladium nanoparticles: Dependence of adsorbed CO on electrode potential

The electrochemical reduction of CO₂ is strongly influenced by both the applied potential and the surface adsorption status of the catalyst. In this work a gas diffusion electrode (GDE) coated with Pd nanoparticles/carbon black (Pd/XC72) was used to study the electrochemical reduction of CO₂. Cyclic voltammetric (CV) analysis of Pd/XC72 between 1.5 V and − 0.6 V (vs. RHE) shows the formation of intermediates and the blocking of hydrogen absorption on the Pd nanoparticles (NPs) under a CO₂ atmosphere. The relationships between the Faradaic efficiency/current density and the applied potential reveal that the onset potential of CO formation is around − 0.4 V. Moreover, the presence of adsorbed CO was confirmed through CV analysis of Pd/XC72 under CO₂ and CO/He atmospheres. This demonstrates that H atoms and CO intermediates co-adsorb on the surface of the Pd NPs at an applied potential of around − 0.4 V. When the applied potential is more negative than − 0.6 V, adsorption of CO intermediates on the surface of the Pd NPs becomes dominant.     

Potentiostatically deposited nanostructured α-Co(OH)2: A high performance electrode material for redox-capacitors

A high specific capacitance was obtained for α-Co(OH)₂ potentiostatically deposited onto a stainless-steel electrode in 0.1 M Co(NO₃)₂ electrolyte at −1.0 V vs. Ag/AgCl. The structure and surface morphology of the obtained α-Co(OH)₂ were studied by using X-ray diffraction analysis and scanning electron microscopy. A network of nanolayered α-Co(OH)₂ sheets was obtained; the average thickness of individual α-Co(OH)₂ sheets was 10 nm, and the thickness of the deposit was several micrometers. The capacitive characteristics of the α-Co(OH)₂ electrodes were investigated by means of cyclic voltammetry and constant current charge–discharge cycling in 1 M KOH electrolyte. A specific capacitance of 860 F g⁻¹ was obtained for a 0.8 mg cm⁻² α-Co(OH)₂ deposit. The specific capacitance did not decrease significantly for the active mass loading range of 0.1–0.8 mg cm⁻² due its layered structure, which allowed easy penetration of electrolyte and effective utilization of electrode material even at a higher mass. This opens up the possibility of using such materials in supercapacitor applications.     

Microfluidic cell with a TiO2-modified gold electrode irradiated by an UV-LED for in situ photocatalytic decomposition of organic matter and its potentiality for voltammetric analysis of metal ions

A novel microreactor for TiO₂-assisted photocatalysis in a microfluidic electrochemical cell was designed and constructed by a technology that can be reproduced in any chemical laboratory. The cell is obtained by a two-step thermal transfer of laser printed masks onto gold CD-Rs, a subtractive one to define the electrodes, and an additive one to define the channels. The TiO₂ nanoparticles are physically embedded in a gold matrix by electrodeposition from a solution of ions of this metal also containing colloidal suspension of anatase. This modification is conducted in the assembled microfluidic cell, with minimum material and time consumption. A 100 mW UV-LED (365 nm) is focused on the modified electrode and irradiation of the sample in the thin layer microreactor is conducted under stopped flow condition. The Cu–EDTA complex served as model system to demonstrate the in situ photocatalytic digestion of organic matter followed by the voltammetric determination of the metal ion in aqueous solution. The voltammetric wave of 1.0 × 10⁻³ mol L⁻¹ Cu(II) in acetate buffer (pH 4.7) at the gold electrode is suppressed by EDTA in the −0.3 to 0.8 vs. Ag/AgCl region. Irradiation of the bare electrode at 365 nm does not recover the wave, while irradiation of the TiO₂-modified gold electrode causes the recovery of the copper wave, proving the photocatalytic destruction of the chelating agent. Diffusion transport to/from the modified electrode rapidly enrolls the whole volume of sample in the thin-layer above the electrode (about 19 nL), so that in less than four minutes the recorded voltammogram become indistinguishable from that of a copper ion solution without EDTA. This novel in situ sample pre-treatment approach is very promising, deserving further research aiming its integration in micro-TAS.     

An enzymatic glucose/O2 biofuel cell: Preparation,characterization and performance in serum

This study demonstrates a new kind of single-walled carbon nanotubes (SWNT)-based compartment-less glucose/O₂ biofuel cell (BFC) with glucose dehydrogenase (GDH) and bilirubin oxidase (BOD) as the anodic and cathodic biocatalysts, respectively, and with poly(brilliant creysl blue) (BCB) adsorbed onto SWNT nanocomposite as the electrocatalyst for the oxidation of NADH. The prepared GDH-polyBCB-SWNT bioanode exhibits an excellent electrocatalytic activity toward the oxidation of glucose biofuel; in 0.10 M phosphate buffer containing 20 mM NAD⁺ and 100 mM glucose, the oxidation of glucose commences at −0.25 V and the current reaches its maximum of 310 μA/cm² at −0.05 V vs. Ag/AgCl. At the BOD-SWNT biocathode, a high potential output is achieved for the reduction of O₂ due to the direct electron transfer property of BOD at the SWNTs. In 0.10 M phosphate buffer, the electrocatalytic reduction of O₂ is observed at a high potential of 0.53 V vs. Ag/AgCl with an electrocatalytic current plateau of ca. 28 μA/cm² at 0.45 V under ambient air and ca. 102 μA/cm² under O₂-saturated atmosphere. In 0.10 M phosphate buffer containing 10 mM NAD⁺ and 40 mM glucose under O₂-saturated atmosphere, the power density of the assembled SWNT-based glucose/O₂ BFC reaches 53.9 μW/cm² at 0.50 V. The performance and the stability of the glucose/O₂ BFC are also evaluated in serum. This study could offer a new route to the development of new kinds of enzymatic BFCs with a high performance and provide useful information on future studies on the enzymatic BFCs as in vivo power sources.     

Adsorption of 4-aminopyridine on Co and Ag electrodes probed by SERS

The adsorption of 4-aminopyridine (4-AP) on Co and Ag electrodes in acid or alkaline solutions of KCl and KI electrolyte salts were monitored by the Surface-enhanced Raman Spectroscopy (SERS) technique. The SERS intensity for the Ag electrode was in 2 orders of magnitude higher than for the Co electrode, due to the enhancement of the Raman cross-section on Ag by the surface-plasmon excitation. In acidic chloride medium (pH 4), the SERS results for Ag electrodes indicate that the protonated form of 4-AP (4-APH⁺) adsorbs in the potential range of −0.1 to −0.6 V (Ag|AgCl|KCl sat) through hydrogen-bonding between 4-APH⁺ and Cl⁻ adsorbed on the electrode surface; at more negative potentials the neutral form 4-AP is the predominant adsorbed species. For Co electrode in the same medium, only bands due to neutral 4-AP were observed in the spectra at −0.8 and −0.9 V. For more negative potentials bands assigned to both 4-AP and 4-AP surface complex are observed, with the lasts being enhanced, as the potentials are turned more negative. In alkaline chloride medium (pH 13), for less negative potentials the bands assigned to free 4-AP were observed in the spectra of both Ag and Co surfaces. For more negative potentials, only bands assigned to the 4-AP surface complex were observed. For 0.1 mol L⁻¹ KI acidic or alkaline solutions, bands assigned to 4-AP and 4-APH⁺ were observed in a wider potential range than in chloride solutions. An adsorption scheme of 4-AP on Ag and Co is proposed for acidic and alkaline solutions.