2-(5-溴-2-吡啶偶氮)-5-二乙氨基酚-BrO_3~--SCN-三元离子缔合物测定微量BrO_3~-的研究

本文研究了5-Br-PADAP在酸性介质中质子化,与BrO_3~-和SCN~-形成三元离子缔合物的最佳条件,其表观摩尔吸光系数ε_(540)=4.3×10~4L·mol~(-1)·cm~(-1),缔合物组成比为:5-Br-PADAP:BrO_(3-)SCN~-=1:1·1。提供了测定微量BrO_(3-)的新方法,可应用于化学试剂中微量BrO~(3-)的测定。此外,本文还探讨了反应机理。     

动力学分光光度法测定痕量硫氰酸根的研究

利用SCN~-对溴酸钾氧化罗丹明B反应的抑制作用。建立了动力学光度法测定痕量SCN~-的新方法。检出限为0.30ng SCN~-/ml,测定范围为0.30～8.3ngSCN~-/ml.应用于吸烟者与不吸烟者尿中SCN~-的测定。结果较为满意。     

5—Br—PADAP为显色剂吸光光度法测定微量碘酸根的研究

在硫酸介质中,2-(5-溴-2-吡啶偶氮)-5-二乙氨基酚(5-Br-PADAP)与IO_3~-及SCN~-生成红色缔合物,用于吸光光度法分析微量IO_3~-,加入表面活性剂吐温-80可以提高测定的灵敏度和选择性。在最大吸收波长550nm处,可测IO_3~-浓度范围为0～2.45μg·ml~(-1),摩尔吸光系数ε为8.2×10~4,离子缔合物的组成比为5-Br-PADAP:IO_3~-:SCN~-=2:1:4。经测定硝酸钠和氯酸钾中IO_3~-的回收率为97.3％～101.5％,结果令人满意。     

以聚氯乙烯-双硫腙-铜络合物为载体的长寿命硫氰酸根离子选择电极

报道了以PVG-双硫腙（DTZ）-Cu（Ⅱ）,PVC-DTZ-Cu（Ⅰ）为载体制备了性能良好的SCN-离子电极,其选择性次序为SCN~-》ClO_4~->Sal~-》NO_3~-~Cl~->PO_4~(2-)。16℃时,膜组成为PVC－DTZ-Cu（Ⅰ）：PVC：邻硝基苯基辛醚（o-NPOE）＝12∶22∶66的SCN~-离子电极,在0．02mol/LHCl体系中,在1×10~(-2)~5×10~(－6)mol/LSCN~-浓度范围呈能斯特响应,斜率为58±2mV/dec,检测限为2×10~(-6)mol/L;膜组成为PVC-DTZ-Cu（Ⅱ）∶PVC∶o-NPOE∶四苯硼酸钾（KTPB）为8∶22∶55∶15的电极,在0．01mol/LHAc-NaAc缓冲体系中,在10~(-2)~2×10~(-6)mol/LSCN~-浓度范围呈线性响应,斜率为54∶1mV/dec,检测限为8×10~(－7)mol/L.研究了阴离子与载体作用的机理,表明SCN~-与载体中铜原子直接作用。电极应用于废水中SCN~-的测定,结果令人满意。     

高灵敏分光光度法测定食品中痕量硒—硫氰酸盐—罗丹明B—Tween20体系

本文研究了Se(Ⅳ)-SCN-RhB-吐温20高灵敏显色反应体系。Se(Ⅳ)与SCN~-和RhB~+形成三元离子缔合物,并吸附了染料琉氰酸盐,表观摩尔吸光系数2.0×10~6L·mol~(-1).cm~(-1),是碱性染料类分光光度法中最灵敏的。Se含量在0～2μg/25ml范围内遵从比尔定律。利用巯基棉分离干扰离子,选择性高。测定了食品中总硒,结果满意。     

3,5-Br_2-PADAP—IO_3~-—SCN~-三元离子缔合物测定微量IO_3~-的研究

研究了3,5-Br_2-PADAP在酸性介质中质子化。与IO_3~-和SCN~-形成三元离子缔合物的最佳条件,其表观摩尔吸光系数为1.4×10~5L·mol~(-1)·cm~(-1),缔合物组成比为3,5-Br_2-PADAP:IO_3~-:SCN=1:1:1。提供了测定微量IO_3~-的新方法,可用于加碘食盐及海带等样品中含碘量的测定,获得满意结果。     

有机改性剂在双柱离子色谱中的应用

离子色谱(IC)自1975年问世以来,已成为分析化学领域中发展最快的分支之一,并已发展出了多种色谱柱和冲洗剂系统。然而对于那些疏水性较强、离子半径较大的离子,如I~-和SCN~-等,若使用Dionex公司所倡导的“标准条件”,则很难将它们从分离柱上洗脱下来,更无法进行定量测定。一般都采用流动相离子色谱(MPIC)才能进行测定。我们在双柱离子色谱中采用向流动相中加入适当氨基酸作有机改性     

电化学检测器-离子色谱法同时测定微量的氰离子和硫离子

微量CN-和S~(2-)的测定,通常需要预分离以消除卤离子、SCN~-、S_2O_3~(2-)等以及CN~-和S~(2-)之间的相互干扰。因而,操作步骤冗长和费时间。离子色谱的出现给阴离子的分析带来突破,也使得CN~-和S~(2-)的快速分离和测定成为可能。迄今,已发表的离子色谱法测定CN~-和S~(2-)的文章不多。先后为DuVal,Dolzine,Pinschmidt和Koch报导的方法灵敏度都不高,为ppm数量级,而且仅测定CN~-。Bond和Rocklin提出了同时测定     

水、尿及血清中氰化物及硫氰酸盐共存时的分别测定方法(吹气—吡唑啉酮异菸酸法)

当水、尿及血清中同时存在有氰化物及硫氰酸盐时,采用一般的方法是难以将二者分别测定的。Baar及Feldstein等曾介绍过微扩散法,可以分别测定CN~-及SCN~-,但需用特制玻璃仪器,且操作不便。我们根据氰化物在酸性溶液中极易逸出的特点,拟定了用氮气或空气将酸性溶液中的CN~-吹出,用稀NaOH溶液吸收的方法使CN~-和SCN~-分开而测定的方法。实践证明,本法简便,效果良好。近年来测定氰化物大都采用吡唑啉酮     

离子色谱法电导检测电镀液中的有机酸、S_2O_3~(2-)和SCN~-

电镀工业中,为了改善镀层性能,通常需要在电镀液中加入适量电镀添加剂,起到稳定镀液、细化结晶、提高分散能力与深镀能力、增加镀层光亮性等作用~([1]).添加剂的含量直接影响着电镀产品的质量,因而能否在生产过程中及时准确地监测其浓度变化是控制电镀过程的至关晕要的环节.常见组分采用化学滴定、高效液相~([2,3])等方法分类测定,相比而言,离子色谱法能同时完成的分析,优势更为明显~([4,5]).本研究建立了一种简单易行的离子色谱方法,同时测定了电镀液中弱保留组分和易极化离子S_2O_3~(2-)和SCN~-,使得电镀槽液的组分变化的监测更为精确且更加实时化.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.