Li－La－Mn－O钙钛矿型甲烷氧化偶联催化剂的研制

Ｌｉ－Ｌａ－Ｍｎ－Ｏ钙钛矿型甲烷氧化偶联催化剂的研制赵静，王大祥，李永丹（天津大学化工系工业催化教研室，天津３０００７２）关键词甲烷，氧化偶联，催化剂，钙钛石型化合物自１９８２年Ｋｅｌｌｅｒ等［１］首先研究甲烷氧化偶联反应以来，含锂催化剂是至今所开发...     

镍络合物催化条件下2,2'-联吡啶的偶联合成

在制备联吡啶的偶联反应中，镍化合物和三苯基膦通常是以化学计量参与反应 。我们在对Tiecco报道的偶联反应进行研究的过程中发现，这一反应可以在催化条 件下进行。这一改进订基于投料顺序的改变，充分利用零价镍当场（in situ）生 成时的高活性。将氯化镍、三苯基膦、2-溴吡啶先溶于DMF中，然后在50 ℃时加入 锌粉，催化偶联生成联吡啶，可以获得满意的收率。同时对三种镍化合物的反应活 性作了比较，以NiCl_2·6H_2O活性最高。     

钯催化下(Z)-3-碘-3-三氟甲基-1-芳基烯丙醇与末端炔 烃的偶联反应

在Pd(PPh~3)~4/CuI催化下和使用1mol的NEt~3作碱和THF作溶剂,(Z)-3-碘-3-三氟甲基-1-芳基烯丙醇(1)与末端炔烃(3)反应得到正常的偶联产物5。当以NEt~3作碱和溶剂,Pd(PPh~3)~4/CuI催化1与3的交叉偶联反应生成化合物4。4为正常偶联化合物5在NEt~3存在下双键发生重排反应的产物。     

脂肪族羧酸脱羧偶联反应研究进展

脱羧偶联反应是构建碳-碳键、碳-杂键以及活化碳-氢键的有效方法。该反应类型使用羧酸或羧酸盐作为底物,在催化剂的作用下可脱去二氧化碳并与其它化合物进行偶联反应。与传统的偶联反应相比,脱羧偶联反应具有对环境污染小、底物来源广等优点,因此该类型反应引起了研究者们的广泛关注。以芳香族羧酸进行的脱羧偶联反应已被报道,本文综述了近十年来各类催化体系下脂肪族羧酸进行脱羧偶联反应的研究进展。     

钯催化下有机锡化合物的偶联反应在碳-碳键形成过程中的应用

本文述评了最近几年来钯催化的有机锡化合物与有机亲电试剂的交叉偶联反应在有机合成中用于碳-碳键形成的主要研究成果。主要讨论了直接交叉偶联反应,CO或烯键插入的交叉偶联反应和机理。     

钯碳催化下以甲酰肼为还原剂的卤代芳烃还原偶联反应研究

在Pd/C催化下, 以甲酰肼为还原剂, 卤代芳烃通过还原偶联反应能高选择性地合成相应的联苯化合物. 具有不同取代基的卤代芳烃的还原偶联反应产率在52%～94%之间.     

3,5,3'''',5''''-四叔丁基-苄烯-4,4''''-醌的合成和分子结构

酚与铜的相互作用的研究有助于阐明生物体中酶催化氧化的作用过程和有机合成的催化机理。文献中对于2，4-或2，6-二取代酚的氧化偶联反应已有所报道本文报道了2，6-二叔丁基4-甲基酚钠在无水无氧条件和无水氯化亚铜或氯化铜作用下，可发生高效氧化偶联反应，且偶联反应发生在对位甲基位置上，生成3，5，3’，5’-四叔丁基-苄烯4，4’-醌。本文还表征了该化合物的分子结构。     

镍络合物催化条件下2,2′-联吡啶的偶联合成

在制备联吡啶的偶联反应中 ,镍化合物和三苯基膦通常是以化学计量参与反应 .我们在对Tiecco报道的偶联反应进行研究的过程中发现 ,这一反应可以在催化条件下进行 .这一改进主要基于投料顺序的改变 ,充分利用零价镍当场 (insitu)生成时的高活性 .将氯化镍、三苯基膦、2 溴吡啶先溶于DMF中 ,然后在 5 0℃时加入锌粉 ,催化偶联生成联吡啶 ,可以获得满意的收率 .同时对三种镍化合物的反应活性作了比较 ,以NiCl2 ·6H2 O活性最高 .     

环钯化合物在Heck反应中的应用研究

钯催化交叉偶联反应在化学工业、合成天然产物及生物活性物质中有着广泛的应用。催化剂体系是交叉偶联反应研究的核心。环钯化合物结构简单、性能稳定,在催化交叉偶联反应中具有高活性、高选择性,引起研究者们的极大关注,不断有新的环钯化合物被合成出来,其催化性能也得到了研究。本文综述了环钯化合物的合成方法及其在Heck反应中的应用。     

一种简单、温和、高效、无金属催化的双硫化物合成方法

以95%乙醇作为溶剂,在三溴苯乙酮的存在下硫酚或硫醇发生自身偶联反应生成双硫化合物。这是继传统方法之后一种温和、操作简单、绿色并且无金属催化的合成方法。在优化反应条件下考察了多种苯硫酚和硫醇类化合物,发现芳环上连有供电基团的化合物比含吸电子基团的能获得更高的产率,并且反应时间更短;同时,以脂肪族和杂环类化合物为底物也有较高的产率。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.