大粒径介孔氧化硅微球的优化合成及表征

以非离子型嵌段共聚物为模板剂、正硅酸乙酯为硅源,制备了一种比表面积为712m2·g-1、孔径6.93nm、孔容1.06cm3·g-1、粒径10μm的介孔SBA-15微球,采用扫描电镜考察了各种合成条件对介孔氧化硅微球形貌的影响,对SBA-15介孔微球的合成条件优化和形成机理进行了研究和探讨。结果表明:介孔氧化硅微球的生长可以看作一个由微小溶胶粒子发生渐进聚沉、成长为较大溶胶粒子的过程;共表面活性剂和无机盐的引入对介孔微球的形成具有辅助作用;合成体系的酸度和晶化阶段之前的陈化条件是介孔微球形成的关键所在。在共聚物的盐酸溶液(1mol·L-1)中,不添加共表面活性剂和无机盐,仅控制陈化条件于35℃静置24h,100℃水热处理24h,可得到大粒径的介孔SBA-15微球。     

SBA-15负载CeO2纳米晶的溶胶-凝胶一步合成

以P123为模板剂, 正硅酸乙酯和硝酸铈为前驱体, 通过溶胶-凝胶路线在酸性条件下合成了SBA-15负载氧化铈(CeO2与SiO2质量比为28.7%)有序介孔材料. 采用热重/差热分析(TGA/DTA)、X射线衍射(XRD)、透射电镜(TEM)和氮气吸附等手段对所合成材料进行了表征. 结果表明, 合成的材料具有类似于SBA-15的结构, 孔径、孔容和比表面积分别为38.7 Å, 0.46 cm3/g和570 m2/g. X射线衍射(XRD)、透射电镜(TEM)、X射线能谱(EDS)和选区电子衍射花样联合表征证实了铈物种以高分散的CeO2纳米晶的形式分布在介孔基体中.     

可用于色谱固定相的介孔氧化硅球材料的合成

采用非离子型嵌段高分子表面活性剂EO₂₀PO₃₀EO₂₀ (P65)为结构导向剂, 正硅酸乙酯为硅源, 在酸性介质中, 静置法制备了微米级介孔氧化硅球. 通过改变合成温度、反应时间或者无机盐KCl的加入量, 可以调节介孔氧化硅球的直径(9.0～17.6 μm); 加入1,3,5-三甲苯(TMB)或者调节水热温度, 可以调节介孔氧化硅球的孔径(2.3～4.8 nm). 采用X射线衍射(XRD)、N₂吸附-脱附、扫描电镜(SEM)、激光散射粒度分布和对溶菌酶的吸附等方法, 对介孔氧化硅球的结构、孔性质、形貌、吸附性质等进行了表征. 实验发现, 孔径较小的介孔氧化硅球(≤4.3 nm)对溶菌酶的吸附不明显(≤42 mg/g), 而孔径(4.8 nm)大于溶菌酶直径的材料对溶菌酶有较大的吸附量(192 mg/g), 说明孔径均匀可调的介孔氧化硅球材料可以很好地用作体积排阻色谱柱的固定相.     

介孔分子筛SBA-15作为高效液相色谱固定相分离维生素E

以三嵌段共聚物P123聚环氧乙烷-聚环氧丙烷-聚环氧乙烷(PEO-PPO-PEO)为模板,在强酸性(1.6mol/L HCl)条件下,水热合成了棒状二维六方有序介孔材料SBA-15.粒径棒长约1～1.5μm,直径为400～500nm,平均孔径5.8nm,BET比表面积799㎡/g.并用合成的SBA-15作为正相高效液相...     

HCl对有序介孔氧化硅结构与形貌的影响

以三嵌段共聚物P123为有机模板导向剂、正硅酸乙酯TEOS为无机硅源, 在HCl存在的强酸性环境下, 采用水热法合成了有序介孔分子筛SBA-15. 采用XRD、SEM、TEM、N2吸附-脱附等手段对产物的结构与形貌进行了分析, 考察了HCl用量对有序介孔材料结构及形貌的影响. 结果表明, 在合成有序介孔氧化硅时, HCl发挥了催化和中间离子的双重作用, 促使棒状胶束形成六方有序排列, 降低SBA-15中微孔的数量, 而且对合成有序介孔氧化硅SBA-15的形貌有显著影响. 适宜的HCl用量对形成“珍珠链状”形貌的、热稳定性优良的SBA-15介孔材料具有重要作用.     

由纳米晶前驱体组装有序介孔silicalite-1分子筛

采用两步法将不同尺寸的silicalite-1分子筛纳米晶种通过自组装合成了一系列有序介孔silicalite-1分子筛。首先将强碱性的silicalite-1前驱体分别加热不同时间得到纳米晶种,然后在类似合成SBA-15的强酸性条件下组装成有序的介孔材料。合成条件的剧烈变化阻止了分子筛晶种的继续长大,并在三嵌段共聚物模板的诱导下组装成有序介孔材料。这种“自下而上”的方法制备有序介孔分子筛同时包含微孔和介孔。氮气吸脱附结果表明所制备的介孔分子筛材料均表现了很大的比表面积(730 m2/g以上)。     

由纳米晶前驱体组装有序介孔silicalite-1分子筛（英文）

采用两步法将不同尺寸的silicalite-1分子筛纳米晶种通过自组装合成了一系列有序介孔silicalite-1分子筛.首先将强碱性的silicalite-1前驱体分别加热不同时间得到纳米晶种,然后在类似合成SBA-15的强酸性条件下组装成有序的介孔材料.合成条件的剧烈变化阻止了分子筛晶种的继续长大,并在三嵌段共聚物模板的诱导下组装成有序介孔材料.这种"自下而上"的方法制备有序介孔分子筛同时包含微孔和介孔.氮气吸脱附结果表明所制备的介孔分子筛材料均表现了很大的比表面积(730 m2/g以上).     

硫掺杂有序介孔碳材料作为燃料电池氧还原催化剂

以百里香酚蓝为前驱物,采用硬模版法一步合成硫掺杂的有序介孔碳材料(S-OMC)。在900℃下热解负载百里香酚蓝的介孔二氧化硅SBA-15,获得了具有石墨孔壁结构的有序介孔碳材料(S-OMC-900)。硫元素均匀有效地分布在碳材料介孔孔壁上,并对催化氧还原反应(ORR)起到了关键性作用。S掺杂的有序介孔碳材料的比表面积为1 230 m~2·g~(-1),孔径4.6 nm,有序的孔道结构保证了氧还原反应的物料运输,增大了催化活性。测试结果表明,所制备的S-OMC-900具有良好的催化活性和稳定性。与商业Pt/C比较,S-OMC-900具有更好的甲醇耐受性。     

"面包圈"状高有序度大孔径介孔分子筛SBA-15的合成

介孔材料因其高度有序的大孔径、较佳的催化吸附性能、良好的电磁性质及易于剪裁而引起人们极大的兴趣[1～9].人们已相继合成了介孔氧化硅薄膜[3,10]、球[12]、空心球[4,13]和纤维[12～15]等,并设法控制中孔材料晶体外貌[3～9,15～21].最近,我们报道了利用多相组装和无机晶体(如NaCl,LiCl)作大孔结构导向剂的方法[16],合成了人造"珊瑚"状介-大孔氧化硅膜[13].Lin等[17]用共表面活性剂法在丁醇存在下合成了多组有序结构的介孔氧化硅空心球; Shio等[21]在完全溶解的硅酸钠和阳离子表面活性剂溶液中,合成了细棒状介孔氧化硅粉末.本文报道一种控制介孔材料颗粒外貌和形状的新方法,即共溶剂法,并以此法合成了高有序度、大孔径、 "面包圈"状介孔氧化硅SBA-15.这种新材料有望在微加工、催化、生物分离、电子器件的矿化、色谱载体等方面得到应用[1～9].     

有序介孔二氧化硅对正丁醛的吸附性能

合成了一系列具有不同孔结构与性质的有序介孔二氧化硅材料SBA-15、MCM-41、SBA-16、KIT-6,同时通过改变水热温度制备了不同孔径大小的SBA-15,并利用小角X射线散射、透射电镜、扫描电镜和氮气吸附-脱附等手段,对其介孔结构进行了表征.以正丁醛为探针分子,考察了其对有机醛的吸附,并与Y-沸石的吸附性能做了对比.结果表明,材料的介孔比表面积与其对正丁醛的吸附量成正比,吸附等温线符合Langmuir模型,属于单层吸附,具有最大介孔比表面积的MCM-41对正丁醛的吸附量最大(484 mg·g-1).最后将SBA-15添加到卷烟滤嘴中,实验结果表明,SBA-15能显著降低卷烟烟气中巴豆醛的释放量.     

Synthesis and characterization of surface modified SBA-15 silica materials and their application in chromatography

Hexagonally ordered SBA-15 mesoporous silica spheres with large uniform pore diameters are obtained using the triblock copolymer, Pluronic P123, as template with a cosurfactant cetyltrimethylammonium bromide (CTAB) and the cosolvent ethanol in acidic media. A series of surface modified SBA-15 silica materials is prepared in the present work using mono- and trifunctional alkyl chains of various lengths which improves the hydrothermal and mechanical stability. Several techniques, such as element analysis, nitrogen sorption analysis, small angle X-ray diffraction, scanning electron microscopy (SEM), FTIR, solid-state (29)Si and (13)C NMR spectroscopy are employed to characterize the SBA-15 materials before and after surface modification with the organic components. Nitrogen sorption analysis is performed to calculate specific surface area, pore volume and pore size distribution. By surface modification with organic groups, the mesoporous SBA-15 silica spheres are potential materials for stationary phases in HPLC separation of small aromatic molecules and biomolecules. The HPLC performance of the present SBA-15 samples is therefore tested by means of a suitable test mixture.     

Manipulation of Shell Morphology of Silicate Spheres from Structural Evolution in a Purely Inorganic System

We have investigated the structural transformation of solid silica spheres into various more complex spherical structures including flower‐like, thick or thin nanosheet‐shelled and porous shelled spheres. In the absence of organic additives, sodium salts contained in this inorganic reaction system apparently direct the silica dissolution and regrowth of dissolved silicate at the nanometer‐scale, leading to the formation of a nanosheet network rather than solid aggregates. Subsequent removal of the salts by simple water washing results in voids in the siloxane network and a significant availability of surface silanol groups so that the resulting nanosheets and spheres composed of them possess large surface areas, pore volumes, and morphological flexibility, which can be varied by an applied stimulus. The results represent a rare example of the transformation of a simple silicate structure into a much more complex spherical structure involving a purely inorganic reaction system.     

几种手性醇在纤维素键合的SBA-15基手性固定相上的直接拆分

在强酸性条件下, 以三嵌段聚醚P123为模板, 合成了孔径大且粒径均匀的SBA-15介孔二氧化硅微球. 将含有少量三乙氧硅丙基氨基甲酸酯残基的纤维素-三(3,5-二甲基苯基氨基甲酸酯)通过分子间缩聚作用固载到氨丙基化的SBA-15微球上, 制得手性固定相; 采用常规和非常规的流动相模式, 对一些芳香醇的消旋体进行了手性拆分. 实验结果表明, 所制备的SBA-15微球不仅分散性良好, 具有规则的二维六方孔道结构, 而且消除了微孔; 所制备的键合手性固定相不仅固载手性选择剂的量大, 而且经六甲基二硅胺烷封端后可有效改善拖尾现象, 对实验选用的手性醇具有较高的拆分能力; 与大孔硅胶为基质的同类纤维素键合手性固定相相比, 该固定相对同种手性消旋体的分离因子明显提高.     

Maghemite nanocrystal impregnation by hydrophobic surface modification of mesoporous silica

Here, we report the design of a hybrid inorganic/organic mesoporous material through simultaneous pore engineering and hydrophobic surface modification of the intramesochannels to improve the uptake of superparamagnetic maghemite nanocrystals via impregnation techniques. The mesoporous material of the SBA-15 type was functionalized in situ with thiol organo-siloxane groups. Restricting the addition of the thiol organo-siloxane to 2 mol % yielded an inorganic/organic hybrid material characterized by large pores and a well-ordered hexagonal p6mm mesophase. The hydrophobic surface modification promoted the incorporation of 7.5 nm maghemite (gamma-Fe2O3) nanocrystals, prepared through temperature-controlled decomposition of iron pentacarbonyl in organic solvents. The hydrophobic, oleic acid capped superparamagnetic maghemite nanocrystals were incorporated into the porous network via wet impregnation from organic suspensions. Combining diffraction, microscopy, and adsorption data confirmed the uptake of the nanocrystals within the intramesochannels of the silica host. Magnetization dependencies on magnetic field at different temperatures show a constriction in the loop around the origin, which indicates immobilization of maghemite nanocrystals inside the thiol-functionalized silica host.     

富含羧基的球形介孔分子筛SBA-15的合成及药物释放性能

本文采用原位合成法合成了富含羧基的SBA-15球形介孔分子筛. 研究了修饰剂（三烷氧基氰乙基硅烷 CTES）的用量对介孔分子筛SBA-15形貌、孔径及BET比表面积的影响. 用粉末X射线衍射(XRD)、扫描电镜(SEM)、红外（IR）和氮气吸附/脱附对样品进行了详细的表征. 该材料展示了尺寸在0.5-1 μm规则的球形形貌、有序的二维六方相介孔结构、较大的比表面积和孔容、并且随着修饰剂用量的增加, SBA-15的孔径变小, 比表面积下降. 药物组装及缓释性能测试表明, 该材料具有较好的药物组装及缓释释放性能. 该材料在催化、药物载体和色谱分析填料等领域将具有潜在的应用.     

Simple synthesis route to monodispersed SBA-15 silica rods

A simple, flexible, reproducible, high-yielding (ca. 100%) synthesis of hexagonally facetted SBA-15 straight rods with uniform sizes (ca. 1.5 x 0.4 mum) under static conditions without using inorganic salts is provided. This method affords rodlike particles with temperature-dependent pore sizes ranging from 5.8 to 12.5 nm but with similar external dimensions. This work shows that in order to prepare short monodispersed SBA-15 rods, (i) the absence of stirring is essential, (ii) the temperature of the first stage should not exceed 60 degrees C, and (iii) addition of inorganic salts is not required.     

Prearation of Highly Ordered Mesoporous Silica Materials and Application as Enzeme Supports

An enzyme, horseradish peroxidase (HRP), was adsorbed in the manner of single immersion method on the silica mesoporous materials, FSM-16, MCM-41 and SBA-15 with various pore diameters from 27 to 92 and their enzymatic activity in an organic solvent and the thermal stability were studied. FSM-16 and MCM-41 showed larger amount of adsorption of HRP than SBA-15 or silica gel,when the pore sizes were larger than the spherical molecular diameter of HRP (ca 64×37). The increased enzyme adsorption capacity may be due to the surface characteristics of FSM-16 and MCM-41, which would be consistent with the observed larger adsorption capacity of cationic pigment compared with anionic pigment for these materials. The immobilized HRP on FSM-16 and MCM-41 with pore diameter above 50 showed the highest enzymatic activity in an organic toluene and thermal stability in aqueous solution at the temperature of 70℃. The immobilized enzymes on the other mesoporous materials including large or small pore sized FSM-16 showed lower enzymatic activity in an organic solvent and the thermal stability. Both surface character and size matching between pore sizes and the molecular diameters of HRP were important in achieving high enzymatic activity in organic solvent and high thermal stability.     

孔壁富含微孔有序介孔材料的设计合成及表征

通过调节水热处理溶液的酸度和温度,进而调控材料孔壁上硅羟基与模板剂的相互作用以及模板剂亲水嵌段嵌入到孔壁内的量,制备出了墙壁富含微孔的有序介孔材料SBA-15.氮气吸附测试表明,当水热处理溶液的pH值和温度分别为2.2和100℃时,经300℃焙烧脱除模板剂后的样品具有较高的微孔含量,其微孔体积为0.176cm3/g,占总孔体积的21.6%.     

基于L-谷氨酸的手性硅胶球的制备及其应用

无机介孔硅球因其具有足够的机械强度、热稳定性,以及适应多种流动相的优点,成为高效液相色谱(HPLC)柱填料中使用最广泛和最重要的材料。但在此研究领域中,并未见球形的全无机手性硅胶用作HPLC手性固定相。该文以无机球形介孔硅胶作为研究对象,通过堆砌硅珠法,以硅溶胶为原料,L-谷氨酸(L-Glu)为手性源,在手性环境中制造出脲醛树脂与胶体二氧化硅混合的小球,在550 ℃高温下煅烧除去树脂部分,制备基于L-Glu的无机介孔硅胶球。通过元素分析、红外光谱、扫描电镜、透射电镜和氮气吸附等表征证明这是一种具有规则球形的手性硅胶球,其手性来源于硅胶球自身的骨架和孔结构。将L-Glu手性硅胶球作为固定相制备了HPLC色谱柱,以正己烷-异丙醇(9∶1, v/v)作为流动相,流速为0.1 mL/min,考察了该手性柱对一系列外消旋化合物的拆分性能。实验表明,该手性柱拆分了15种外消旋化合物,其中特罗格尔碱、吡喹酮、3-苄氧基-1,2-丙二醇、1,2-环氧己烷、3-羟基-2-丁酮、2-甲基四氢呋喃-3-酮、异丙基缩水甘油醚达到基线分离;还分离了10种苯系位置异构体,o,m,p-氨基苯酚、o,p-氯苯酚、o,m,p-碘苯胺、o,m,p-甲苯胺、o,m,p-二硝基苯、o,m,p-氯苯胺、o,m,p-硝基苯酚、o,m,p-溴苯胺达到基线分离。实验表明,L-Glu手性硅胶球在手性分离方面具有良好的可行性,与普通硅胶相比不需要进一步修饰就可以有较好的手性分离效果,是一种低成本、制备便捷的手性无机硅胶固定相。     

催化苯羟基化反应的高效介孔VOx/SBA-16催化剂

利用浸渍法制备了介孔SBA-16负载高分散氧化钒催化剂(VOx/SBA-16),并使用XRD,TEM,N2物理吸附和Raman光谱对其进行了表征.结果表明,制备的VOx/SBA-16催化剂保持了SBA-16立方笼状孔结构,钒物种主要高度分散在SBA-16载体孔内.钒含量为7·3%的VOx/SBA-16催化剂在催化苯羟基化反应中表现出优异的催化性能.这是由于催化剂表面形成了高分散的VO4物种和纳米结构V2O5微晶.