5种手性化合物在壳聚糖-苯基氨基甲酸酯-脲基手性固定相上的拆分比较

分别将合成的壳聚糖-3,5-二甲基苯基氨基甲酸酯-脲基衍生物涂敷到自制的ZrO2微球及SBA-15上,制得两种高效液相色谱手性固定相(ZrO2-CSP,SBA-CSP)。在所得固定相上以正己烷/醇为流动相对5种手性化合物进行了拆分。两种手性固定相在正相模式下对5种手性化合物均具有一定的手性识别能力。化合物1,2,5分别在ZrO2-CSP上流动相为正己烷/异丙醇(95/5,V/V)、正己烷/乙醇(90/10,V/V)、正己烷/正丁醇(90/10,V/V)中获最佳分离,化合物3,4在SBA-CSP上流动相为正己烷/正丙醇(90/10,V/V)中获最佳分离。     

手性配位交换色谱法拆分普卢利沙星对映体

以L-异亮氨酸和CuSO4作为手性流动相添加剂,采用手性配位交换色谱法拆分普卢利沙星对映体.考察了添加剂的种类、浓度、比例以及流动相pH等因素对拆分的影响.优化的色谱条件为:C18色谱柱,流动相为8 mmol/L L-异亮氨酸和4 mmol/L CuSO4溶液(pH=3.5)-甲醇(68∶32,V/V),流速为1.0 ...     

酰胺型手性固定相直接拆分克仑特罗对映体

 将酰胺型手性固定相用于正相高效液相直接拆分 β2 受体兴奋剂克仑特罗。讨论了三元流动相中正己烷、1,2 二氯乙烷和甲醇含量的变化以及柱温和流速对分离的影响 ;优化了实验条件 :流动相为V(正己烷 )∶V(二氯乙烷 )∶V(甲醇 ) =5 4∶38∶8,柱温为 17℃ ,流速为 1 0mL/min ;并对拆分的机理加以探讨。方法简单、快速。     

苯丙醇对映体在酰胺型手性固定相上的分离

对于手性对映体苯丙醇在3种Pirkle型手性固定相(CSP)Whelk-O 1、DNB-Leu和DNB-Pg上直接分离进行了研究.考察了流动相极性以及温度对分离的影响,发现在常用的范围内无法获得分离,仅有Whelk-O1在流动相极性的极端条件下(正己烷/异丙醇=99.5/0.5,V/V)能够被直接分离.在较低温度0 ℃和流速1 mL/min的优化条件下能获得基线分离.用旋光检测器与液相色谱串联的方式确定了手性拆分结果,并确定了(-)苯丙醇优先洗脱的顺序.针对这种流动相极性极端条件下的分离,结合有关理论,进一步探讨了分离机理.     

CDMPC手性固定相对金属簇化合物的手性拆分

应用纤维素三(3,5-二甲基苯基氨基甲酸酯)(CDMPC)手性固定相对2种羰基钌金属簇合物进行了拆分,通过流动相组成、流速和样品溶剂等条件对拆分影响的考察对拆分条件进行了优化。实验结果表明,簇合物1和簇合物2分别在含乙醇(V(hexane):V(ethanol)=95:5)和异丙醇(V(hexane):V(2-propanol)=90:10)的流动相中得到了较好的拆分,将样品溶解在和流动相组成相近的溶剂中更利于簇合物拆分,簇合物配体结构对簇合物在固定相上的保留和拆分有重要的影响。在优化条件下,2种金属簇合物分离度均达到1.5以上。     

使用大环糖肽抗生素键合固定相高效液相色谱法直接拆分卡巴拉汀

采用高效液相色谱法在大环糖肽抗生素键合固定相手性柱上拆分了卡巴拉汀(Rivastigmine)对映体。考察了甲醇∶乙酸∶三乙胺流动相体系中乙酸和三乙胺的浓度和比例、有机酸的种类、分离温度及流动相流速对拆分结果的影响。选定的色谱条件为:Chirobiotic V手性柱(250mm×4.6mmi.d.,5μm),流动相为V(甲醇)∶V(乙酸)∶V(三乙胺)=100∶0.02∶0.01,柱温5℃,流速0.5mL/min,检测波长274nm。在柱温5~30℃范围内测定lnα与1/T呈线性关系:lnα=ΔΔH0/RT ΔΔR0/R。     

高效液相色谱-串联质谱法结合多糖衍生物手性固定相拆分氰戊菊酯

建立了以多糖衍生物为手性固定相的高效液相色谱-串联质谱(HPLC-MS/MS)直接拆分氰戊菊酯对映体的方法。在反相液相色谱条件下,考察了手性固定相的种类、流动相组成、柱温、流速对氰戊菊酯4个立体异构体分离的影响。同时,利用热力学方法对氰戊菊酯的立体异构体与固定相之间的色谱保留和分离的热力学机理进行了探讨。结果表明:采用Lux Cellulose-3(纤维素-三(4-甲基苯甲酸酯))手性色谱柱,在以流动相为乙腈-水(5 mmol/L甲酸铵)=(55:45,V:V)流速0.4 mL/min,柱温30℃的条件下,可在14 mins内实现氰戊菊酯4个立体异构体的基线分离。拓展了HPLC-MS/MS在菊酯类手性农药对映体分离及检测上的应用。     

纤维素三苯基氨基甲酸酯涂敷型固定相的制备及其对奥美拉唑的拆分

制备了纤维素三苯基氨基甲酸酯涂敷在自制的大孔氨丙基硅胶上的手性固定相，并对奥美拉唑进行了手性拆分。考察了流动相组成和流速对拆分效果的影响，发现用乙醇／正已烷作为流动相，手性物的分离度优于文献报道的异丙醇／正已烷流动相体系，适宜的流动相配比为乙醇／正已烷(40/60，V/V)。分离度随流动相中乙醇含量和流动相流速的增加而减小。     

高效液相色谱分析法测定色氨酸对映体

采用高效液相色谱法,以手性冠醚Crownpak CR( )为固定相、高氯酸溶液/甲醇混合溶液为流动相,成功地实现了色氨酸(Trp)对映体的色谱分离.考察了流动相中甲醇含量、流量和柱温等因素对分离效果的影响.研究表明,适当提高流动相中的甲醇含量、降低流动相流量、降低柱温可以有效地提高分离度.另一方面,提高流动相中的甲醇含量、提高流动相流量、升高柱温可以显著地缩短样品的保留时间.确定了一种最佳分析分离条件,即流动相为甲醇∶高氯酸溶液=15∶85(V/V),流动相流量0.8 mL/min,柱温20℃,波长220 nm,在此条件下进行色谱分离,样品的保留时间小于12 min,分离度达到2.06.该方法具有快速、高效、准确和精密度高等优点.     

利用酰胺型手性固定相高效液相色谱法对格列美脲顺反异构体的分离与测定

利用高效液相色谱法在一种酰胺型手性固定相上直接分离了格列美脲顺反异构体。讨论了流动相组成、柱温度和流速等色谱条件对分离的影响。优化的实验条件为：流动相组成正己烷：1,2-二氯乙烷：甲醇(88：8：4,V/V/V);柱温：25℃;流速：1．8mL／min。得到的分离度和选择性因子分别为1．86和1．12。在2．88～320mg／L的浓度范围内建立了反式格列美脲的标准曲线,线性系数为0．99998;检出限为0．47mg/L。方法简单,可靠,可用于实际格列美脲产品的定量分析。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).