三羰基环戊二烯基钼负离子与1，3－二卤丙烷的反应

三羰基环戊二烯基钼负离子与１，３－二卤丙烷在一缩二乙二醇二甲醚介质中反应，生成环卡宾配合物ＣｐＭｏＸ（ＣＯ）＿２ＣＯ（ＣＨ＿２）＿２ＣＨ２（Ｘ＝Ｂｒ，Ｉ）．硅桥连双环戊二烯基三羰基钼负离子与１，３－二卤丙烷顺利地进行类似反应，生成相应的硅桥连双［环卡宾钼配合物］──Ｅ［Ｃ＿５Ｈ＿４ＭｏＸ（ＣＯ）＿２］ＣＯ（ＣＨ＿２）＿２ＣＨ＿２］＿２（Ｅ＝Ｍｅ＿２Ｓｉ，Ｍｅ２ＳｉＳｉＭｅ＿２，Ｍｅ２ＳｉＯＳｉＭｅ＿２）．化合物硅氧硅桥联二茂二钼环卡宾配合物１１的晶体结构经Ｘ射线衍射测定，晶体属三斜晶系，Ｐ１空间群，晶体学数据：ａ＝０．８１８８（１）ｎｍ，ｂ＝１．０４５（３）ｎｍ，ｃ＝２．３２５２（４）ｎｍ，α＝９４．１４（２）°，β＝９４．０９（１）°，γ＝１０２．４８（２）°，Ｖ＝１．９３０６ｎｍ￣３，Ｚ＝２，Ｄ＿ｃ＝１．８５４ｇ／ｃｍ￣３。     

聚苯乙烯固载聚乙二醇催化环己烯与二氯卡宾的加成反应

本文报道了聚苯乙烯固载聚乙二醇催化环己烯与二氯卡宾的加成反应，考察了聚乙二醇固载前后的催化活性、聚苯乙烯国载聚乙二醇上的聚乙二醇摩尔量、催化剂用量和反应时间等对产品收率的影响，并对催化剂的重复使用活性进行了研究。催化剂首次使用，产品７，７－二氯双环［４，１，０］庚烷的收率为８５．４％。     

含杂环卡宾碳的铁羰基簇合物的结构化学研究Ⅱ．—Fe_3(CO)_8[:CNHC(S)C(CH_3)_2NH]的合成和晶体结构

Ｆｅ３（ＣＯ）＿（１２）和取代２，４＿二硫代乙内酰脲反应，得到新的取代物Ｆｅ３（ＣＯ）＿８－［：ＣＮＨＣ（Ｓ）Ｃ（ＣＨ＿３）＿２ＮＨ］（μ＿３－Ｓ）＿２，并进行了ＩＲ、１￣ＨＮＭＲ、ＭＳ表征，测定了它的分子和晶体结构，讨论了杂环卡宾碎片：ＣＮＨＣ（Ｓ）Ｃ（ＣＨ＿３）＿２ＮＨ的取代位置，它是通过卡宾碳原子与Ｆｅ配位。     

微波场中二氯卡宾产生的研究

二氯卡宾是应用最为广泛的活性中间体,早期制备二氯卡宾的方法为氯仿与叔丁醇钾等强碱作用,条件苛刻。一直到1969年Makosza和Wawrzyniewicz的著名论文发表后,用强碱水溶液和相转移催化剂制取二氯卡宾被认为是最简捷的方法。另据文献报道,以聚氧乙烯类表面活性剂作催化剂进行固-液相反应制备二氯卡宾也可获得较理想的结果。但广泛的实     

四氯化碳与镁的反应及其反应机理的研究──产生二氯卡宾的新方法

四氯化碳与镁的反应及其反应机理的研究──产生二氯卡宾的新方法林海霞,徐良衡,黄乃聚（温州师范学院化学系,温州,３２５００３）（复旦大学化学系）关键词二氯卡宾,偕二氯环丙烷衍生物,单电子转移偕二氯环丙烷衍生物是一类重要的有机合成中间体,它主要通过二氯卡...     

开环移位聚合研究进展

关于开环移位聚合（Ｒｉｎｇ－ＯｐｅｎｉｎｇＭｅｔａｔｈｅｓｉｓＰｏｌｙｍｅｒｉｚａｔｉｏｎ,ＲＯＭＰ）的报导,最早始于５０年代末．１９６０年,Ｅｌｅｕｔｅｒｉｏ［１］用ＬｉＡｌＨ４激活的氧化铝催化降冰片烯（Ｎｏｒｂｏｒｎｅｎｅ,ＮＢＥ）、环戊烯的开环...     

卡宾的钨配合物与二氯甲基Wittig试剂的反应

卡宾的过渡金属配合物是一个十分活跃的研究领域,有关它们的制备方法及性质的研究工作正日益引起人们的注意。Burkhardt等发现,卡宾的钨配合物能与Witting试剂反应,生成烷氧基取代烯烃。本文将卡宾的钨配合物进一步用于与二氯甲基Wittig试剂的反应,合成1,1-二氯-2-烷氧基烯烃。众所周知,1,1-二卤代烯烃是一类产生不饱和卡宾的前体化合物。因此,通过对卡宾的钨配合物与二氯代Wittig试剂之间的反应研究,还可以为进一步研究烷氧基取代不饱和卡宾的性质提供方便。     

利用质谱—质谱法进行稠环芳烃化合物的结构解析

应用（ＥＩ）ＭＳ／ＭＳ法研究了吡啶并苯并蒽酮以及苯并苯并蒽酮类异构体的裂解方式及其与结构之间的相关性，探讨了不同异构体中由Ｍ＾ｉ＋产生的［Ｍ－Ｈ］＾＋、［Ｍ－ＨＣＮ］＾＋、［Ｍ－ＣＯＨ］＾＋、［Ｍ－ＣＯ］＾ｉ＋、［Ｍ－（ＣＯ＋２Ｈ）］＾ｉ＋以及［Ｍ－（ＣＯ＋ＨＣＮ）］＾ｉ＋（ｉ＝１，２）等１价及２价离子在ＭＳ／ＭＳ－ＣＩＤ谱上的强度差异和裂解方式，发现是否含有氮原子以及氮原子和苯环位置的差异，是支     

含杂环卡宾碳的铁羰基簇合物的结构化学研究Ⅱ.—Fe3（CO）8（：CNH（S）C（…

Ｆｅ３（ＣＯ）１２和取代２，４－二硫代乙内酰脲反应，得到新的取代物Ｆｅ３（ＣＯ）８＾－（：ＣＮＨＣ（Ｓ）Ｃ（ＣＨ３）２ＮＨ（μ３－Ｓ２），并进行了ＩＲ，＾１ＨＮＭＲ，ＭＳ表征，测定了它的分析和晶体结构，讨论了杂环卡宾碎片：ＣＮＨＣ（Ｓ）Ｃ（ＣＨ３）２ＮＨ的取代位置，它是通过卡宾碳原子与Ｆｅ配位。     

过渡金属卡宾正离子的从头算研究

过渡金属卡宾正离子被认为是如烯烃的聚合和烷基金属的分解过程等许多反应的中间体．较为稳定的环丁烷金属离子和环戊烷金属离子已从相应酮的脱羰反应获得［１］．Ｊａｃｏｂｓｏｎ等［２］研究了ＦｅＣＨ＋２和ＣｏＣＨ＋２与烯烃和环烷烃的气相反应．Ｍｃｋｅｅ［３］在...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.