磁性Fe3O4纳米晶的电化学制备及在线混凝过程研究

以铁片和碳纤维为电极,采用电化学法实现了磁性Fe3O4纳米晶混凝剂的快速制备、在线混凝和磁性过滤的预处理过程.采用X射线衍射仪(XRD)和扫描电子显微镜(SEM)等对磁性Fe3O4纳米晶进行了表征.结果表明,所制备的磁性Fe3O4纳米晶具有均匀的晶体尺寸,粒子尺寸分布在30~100 nm之间.利用Fe3O4纳米晶对高浊度高岭土悬浊液进行了混凝研究,并在外加磁场的作用下实现了絮凝体和水体的快速分离.结果证实电化学法磁混凝技术能够快速高效去除污水浊度,省去了机械过滤过程.理论研究结果表明,磁性Fe3O4纳米晶去除浊度的过程是电荷中和与沉淀卷扫共同作用的结果,而电荷中和过程发生是由于电化学制备Fe3O4纳米晶时表面电荷种类的均一性.     

纳米Fe3O4/聚苯乙烯均匀分散体系的制备及结构

用化学共沉淀法制备了Fe3O4纳米颗粒,以油酸为表面活性剂,苯乙烯为载液,制备了稳定的纳米Fe3O4可聚合磁流体,将可聚合磁流体经自由基引发聚合制成纳米Fe3O4/聚苯乙烯均匀分散体系,用WAXRD研究了Fe3O4纳米粒子的结晶情况;用FTIR研究了油酸表面改性前后Fe3O4粒子表面官能团的变化;用TEM研究了Fe3O4颗粒的粒径大小及其在苯乙烯单体和聚苯乙烯中的分散情况;用DSC和TGA研究了纳米Fe3O4/聚苯乙烯均匀分散体系的玻璃化转变温度(Tg)和热稳定性,结果表明,合成的纳米Fe3O4为立方晶型,平均粒径在10nm左右,油酸分子在Fe3O4表面是化学吸附,经表面处理的Fe3O4超细颗粒在苯乙烯和聚苯乙烯基体中分散较均匀.界面粘结较好,含1.8％Fe3O4纳米颗粒的聚苯乙烯的最大热失重温度比聚苯乙烯提高了13K,Fe3O4/聚苯乙烯复合体系的饱和磁化强度σs为17.43emu/g.     

磁性Fe3O4/石墨烯Photo-Fenton催化剂的制备及其催化活性

采用共沉淀法制备磁性Fe3O4/GE(石墨烯)催化剂,实现Fe3O4纳米颗粒生长和氧化石墨烯还原同步进行,采用FTIR、XRD、TEM及低温氮吸附-脱附等对Fe3O4/GE纳米催化剂的物相、颗粒粒径及比表面积进行了表征。在H2O2存在条件下,以亚甲基蓝为目标降解物,考察了在模拟太阳光下Fe3O4/GE的催化活性,当氧化石墨烯与Fe3O4的质量比为1∶10时,经过2 h催化反应,在pH=6条件下,对亚甲基蓝的降解率达到98.7%,经过10次循环使用后对染料溶液的降解率仍保持在95.7%以上,明显优于纯的Fe3O4。     

用于体外基因转染的氨基硅烷Fe3O4复合纳米粒子的合成及表征

利用2-吡咯烷酮和乙酰丙酮铁为原料制备Fe3O4磁性纳米颗粒, 用XRD和TEM对样品进行了表征. 选择偶联剂γ-氨丙基三乙氧基硅烷[NH2C3H6Si(OC2H5)3]对纳米粒子进行表面修饰, 制得APTTS/Fe3O4复合载体材料. 以此复合粒子作为传递载体, 将CD基因转染U251胶质瘤细胞. 采用RT-PCR, Western blot及免疫荧光等方法检测CD基因的表达及功能. 结果表明, 制备的Fe3O4颗粒粒径为8~10 nm, 结晶度较高; 经表面修饰后, 粒子表面负载—OH, —NH, —NH2, —C—O和—C—OH等多种功能基团. DNA结合分析及DNase-I消化结果表明, APTTS/Fe3O4粒子能够有效地结合和保护DNA. 体外细胞转染实验证实, 该复合纳米颗粒能够高效地传递CD基因进入U251胶质瘤细胞内, 并进行稳定表达.     

磁性可见光催化剂BiVO4/Fe3O4的制备及催化活性

采用超声法将磁基体Fe3O4和BiVO4复合,制备了易于固液分离的磁性可见光催化剂BiVO4/Fe3O4。采用X射线衍射(XRD)、傅立叶转换红外光谱(FTIR)、紫外-可见漫反射光谱(DRS)、透射电子显微镜(TEM)和磁学性质测量系统(MPMS)对产物进行了表征,并以亚甲基蓝为目标降解物,考察了BiVO4/Fe3O4的可见光催化活性。当BiVO4与Fe3O4质量比为5:1时,BiVO4/Fe3O4的催化活性最高,反应经过5 h,对亚甲基蓝的降解率达到92.0%,而单独使用BiVO4为催化剂,降解率仅为72.5%。这表明Fe3O4不仅起到磁基体的作用,还起到助催化剂的作用。BiVO4/Fe3O4在外加磁场的作用下很容易被分离,撤消外加磁场后,通过搅拌又可重新分散。BiVO4/Fe3O4 3次回收后的降解率仍高于80%。     

超疏水-超亲油棉织物的制备及在油水分离中的应用

采用溶胶-凝胶法制得Zn O溶胶,以棉织物为基底,在其表面浸涂Zn O溶胶,再经辛基三甲氧基硅烷表面修饰后显示出超疏水性和超亲油性,水滴和油滴在其表面的接触角分别为152°和0°.利用棉织物表面的超疏水性和超亲油性,可以实现对油水混合物中油和水的有效分离.为防水服饰的设计、超疏水/超亲油材料的制备及在油水混合物的分离与应用提供借鉴.     

基于TA-FeⅢ还原Ag离子构建木材疏水表面

本研究用一种简单、通用、快速的化学表面改性方法对木材进行疏水改性,制备的木材试件具有优异的疏水性能,具有拓展低值人工林木材应用范围的潜在能力。利用单宁酸(TA)与三价铁离子(Fe^Ⅲ)配位形成的TA-Fe^Ш复合涂层的粘附性以及TA中游离邻苯二酚/邻苯三酚良好的还原能力,将金属Ag离子原位还原为Ag纳米颗粒,在木材表面构建良好的粗糙度;随后,在复合涂层上接枝疏水长链,从而制备出疏水型木材。结果表明,随着自组装次数的增加以及还原的Ag纳米颗粒在木材复合涂层的沉积,使得木材表面的粗糙结构得到了适度的发展。未改性木材表面的接触角为52.0°,随着接触时间延长,接触角迅速下降,水滴很快渗入到木材中;而经过改性处理的木材,随着自组装次数的增加,TA-Fe^III/木材试件的接触角从138.2°增加至近143.7°;TA-Fe^III/Ag/木材试件的接触角从142.3°增加到了146.7°,使木材具有了优异的疏水性能。在强酸、强碱、有机溶剂、超声波清洗和紫外线老化等恶劣条件下,疏水木材接触角均高于135.0°,制备出...     

Fe_3O_4/TiO_2纳米异质结构的制备及磁性

以TiO2纳米线和Fe(NO3)3·9H2O为原料,在一缩二乙二醇体系中通过溶剂热反应制备了Fe3O4纳米粒子/TiO2纳米线异质结构.高分辨透射电子显微镜(HRTEM)观测结果表明,Fe3O4纳米粒子均匀地附着在TiO2纳米线上,并与TiO2纳米线之间形成了有效的复合.磁性研究结果表明,与文献报道的同粒径纯相Fe3O4纳米粒子相比,异质结构的阻隔温度点明显降低,异质结构的形成对Fe3O4磁性产生了影响.     

聚丙烯酰胺修饰Fe_3O_4磁性纳米粒子的制备与表征

首先通过化学处理在Fe3O4磁性纳米粒子表面引入Si—H键,然后通过选择性的硅氢加成反应制备了一个端基带溴的磁性引发剂,并利用原子转移自由基聚合(ATRP)技术,在该磁性引发剂表面接枝了聚丙烯酰胺高分子,该聚丙烯酰胺高分子展现出分子量高度可控性和窄的分子量分布.经聚丙烯酰胺修饰后Fe3O4磁性纳米粒子的比饱和磁化强度为58.5 emu.g-1,与未修饰纳米Fe3O4相比下降约20%.     

Ag修饰的Fe_3O_4/TiO_2复合磁性纳米纤维的制备及光催化性能

通过静电纺丝法制备了含有Fe3O4纳米粒子的TiO2纳米纤维,采用水热法对该纤维表面进行纳米Ag修饰,制备出具有较强磁性和较好光催化性能的复合纤维.采用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和紫外-可见光谱(UV-Vis)等对样品的结构和形貌进行表征,并以罗丹明B(Rh B)水溶液降解为模型反应,考察样品在紫外光照射下的光催化性能.结果表明,所制备的TiO2为锐钛矿结构,Fe3O4纳米粒子均匀分布在TiO2纤维中,Ag纳米颗粒比较均匀地分散在磁性TiO2纤维表面.经过纳米Ag修饰后,材料的光吸收能力大为增强,吸收带红移并扩展到可见光区.在紫外光照射40 min后,合成样品对Rh B的降解率达到99.5%.此外,Fe3O4纳米粒子的存在使该材料具有较强的磁性,可通过外加磁场将其分离回收.     

Synthesis of chlorobis/β-diketonato/oxotechnetium/V/ and tris/β-diketonato/technetium/III/ complexes

Chlorobis/-diketonato/ oxotechnetium/V/ complexes [TcOCl/-dik/₂, -diketone=acetylacetone, benzoylacetone and dibenzoylmethane] were newly synthesized using macroamount of⁹⁹Tc. These complexes were further separated into geometrical isomers. Furthermore, an improvement of the yields for the syntheses of tris/-dike-tonato/technetium/III/ complexes [Tc/-dik/₃, -diketone=acetylacetone, benzoylacetone and 2-thenoyltrifluoroacetone] was examined using Tc/III/-thiourea complexes as a starting material.     

Solvent extraction separation of In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/ with sulphoxides

Solvent extraction studies have been made on some metals: In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/, from ammonium thiocyanate solutions by dialkyl sulphoxides. Separation of these metals from one another can be achieved by suitable choice of the extracted conditions. The nature of the extractable metal species has been elucidated.     

LixZryOz三元化合物的制备及表征

采用高温固相法制备了4种高纯度晶相组成的LixZryOz三元化合物,研究了焙烧温度、时间、反应物的种类和初始反应物物质的量比对产物组成的影响,进一步用XRD、SEM及BET分析方法对产物的晶相结构、表面形貌及比表面积进行了表征.实验结果表明,Li2CO3与ZrO2在适当条件下可以合成得到单斜相Li3ZrO3;以LiOH替代Li2CO3,在适当条件下可以分别合成得到四方相Li2ZrO3和三斜/单斜相Li6Zr2O7;进一步以Zr(NO3)4·5H2O代替Zr02,可将单斜相Li6Zr2O7的制备时间由96 h缩短至24 h.SEM照片显示产物硬团聚明显,粒径分布在1～10μm间,BET分析表明样品比表面积处于1.0～9.0 m2·g-1间分布,反应过程中锂的过量以及长时间高温焙烧是引起产物粒径长大和产生硬团聚的主要原因.     

Rate of reactions between D2O and CaxAlyOz

The rate of the reaction between D₂O and the calcium aluminum oxides Ca₃Al₂O₆, Ca₅Al₆O₁₄, CaAl₂O₄, and CaAl₄O₇ was investigated by on-line neutron diffraction powder methods at temperatures from room temperature to 100°C. The rate of the reaction increases with increasing calcium content of the compounds and with increasing temperature for each of the compounds. The crystallographic stable hydrate Ca₃Al₂(OD)₁₂ is obtained from CaAl₄O₇ and CaAl₂O₄ at temperatures above 63°C, from Ca₅Al₆O₁₄ at temperatures above 49°C, and from Ca₃Al₂O₆ at temperatures as low as 7°C.     

Carbon black and propylene oxidation over Ru/CoxMgyAl2Oz catalysts

The effects of Co_xMg_yAl₂O_z mixed oxides composition and ruthenium addition on the oxidation of propylene and carbon black (CB) were investigated. Different reactive cobalt and ruthenium oxide species were formed following calcination at 600 °C. The addition of ruthenium was beneficial for the CB oxidation under “loose contact” conditions and for propylene oxidation when the cobalt content was intermediate to low. The calculated activation energy for CB oxidation was decreased from 151 kJ mol⁻¹ for the uncatalyzed reaction to 111 kJ mol⁻¹ over the best catalyst.     

LixNi0.8-yCo0.2ZnyOp的合成及电化学性能研究

A series of single-phase Li_xNi_0.8-yCo_0.2Zn_yO_p(0.96 ≤x≤ 1.10， 0 ≤y≤ 0.05， 2 ≤p≤ 2(1+y) ) (different in the y values) were synthesized by a two-step solid state reaction method， in which LiOH·H₂O， Zn-doped spherical Ni(OH)₂ and Co₂O₃ were used as the precursors. The ICP-AES analyses proved that the Zn-doped compounds synthesized had the nonstoichiometric form. The results of the XRD， SEM identified that the uniform particles of the as-prepared materials having a good layered structure were fine， narrowly distributed and well crystallized. The electrochemical performance test was carried out and the results showed that the as-prepared Zn-doped materials had not only a high capacity， but also a better cycling stability characterization than the un-doped one. The Li_1.06Ni_0.75Co_0.22Zn_0.03O_2.03 material has an initial reversible capacity as high as 160.5mAh·g^-1; and a first discharge efficiency 89.2%， and exhibits satisfactory cyclic stability with 90% retainable capacity after 50 cycles.     

Preparation and characterization of plutonium/IV/ phenyl acetate and plutonium/IV/ α-naphthyl acetate

Plutonium/IV/ compounds obtained in the reactions with phenylacetic acid and -naphthyl acetic acid in the pH range of 3.5–5.0 have been isolated and studied. Carbon, hydrogen and plutonium analyses have shown that plutonium/IV/ phenyl acetate and plutonium/IV/ -naphthyl acetate have the composition Pu/OH/₃/C₁₀H₇CH₂COO/, respectively. Infra-red and ultra-violet absorption spectral studies and thermogravimetric analysis have corroborated these chemical formulas.     

Separation of Th/IV/ and U/VI/ by extraction chromatography

Application of extraction chromatographic technique to the analytical separation of Th/IV/ and U/VI/ has been investigated. The stationary phase was a macroporous resin Amberlite XE-270 impregnated with undiluted trin-n-butylphosphate /TBP/ and the mobile phase was either 5.OM HNO₃ or 6M HCl. Separation of traces of Th/IV/ from large quantities of U/VI/ was achieved on a laboratory column by elution of the absorbed Th/IV/ with 6M HCl.     

HPMA/OMMT和HPMA/CPMI/OMMT纳米复合材料的制备与表征

通过甲基丙烯酸羟丙酯(HPMA)单体与N-(4-羧基苯基)马来酰亚胺(CPMI)单体在有机蒙脱土(OMMT)中经原位插层自由基聚合反应制备了聚合物-无机纳米复合材料.OMMT由钠基蒙脱土通过十六烷基溴化铵插层处理制备.通过XRD和TEM对复合材料结构进行了表征,证实HPMA单体和HPMA/CPMI共单体在OMMT中原位插层共聚得到的复合材料均为剥离型纳米复合材料.OMMT含量为3 wt%的PolyHPMA/OMMT纳米复合材料起始分解温度为250℃,比相应的纯聚合物的热分解温度提高30℃.随着OMMT含量的增加,热分解温度进一步提高.但在测试温度范围内,PolyHPMA/OMMT纳米复合材料均没有出现明显的玻璃化转变温度.     

PbSe/CdSe and PbSe/CdSe/ZnSe hierarchical nanocrystals and their photoluminescence

Multiple CdSe and ZnSe semiconductor shells were grown on PbSe semiconductor spherical cores with monolayer control. For CdSe shell coating, we found that there was little room to further increase the quantum yields of freshly-made high-quality PbSe nanocrystals that already owned very high initial values because of their good surface status; but there was great improvement for the PbSe nanocrystals with low initial quantum yields because of the poor surface status. Nonetheless, the quantum yield for the latter case could not reach the former's value. Additional ZnSe shells on PbSe/CdSe could further increase the quantum yield and protect the nanocrystals from air oxidation. The observed phenomena in the synthesis of the PbSe/CdSe and PbSe/CdSe/ZnSe core/shell structures were explained through the carrier wave function expansion and the surface polarization.