纳米Fe3O4/聚苯乙烯均匀分散体系的制备及结构

用化学共沉淀法制备了Fe3O4纳米颗粒,以油酸为表面活性剂,苯乙烯为载液,制备了稳定的纳米Fe3O4可聚合磁流体,将可聚合磁流体经自由基引发聚合制成纳米Fe3O4/聚苯乙烯均匀分散体系,用WAXRD研究了Fe3O4纳米粒子的结晶情况;用FTIR研究了油酸表面改性前后Fe3O4粒子表面官能团的变化;用TEM研究了Fe3O4颗粒的粒径大小及其在苯乙烯单体和聚苯乙烯中的分散情况;用DSC和TGA研究了纳米Fe3O4/聚苯乙烯均匀分散体系的玻璃化转变温度(Tg)和热稳定性,结果表明,合成的纳米Fe3O4为立方晶型,平均粒径在10nm左右,油酸分子在Fe3O4表面是化学吸附,经表面处理的Fe3O4超细颗粒在苯乙烯和聚苯乙烯基体中分散较均匀.界面粘结较好,含1.8％Fe3O4纳米颗粒的聚苯乙烯的最大热失重温度比聚苯乙烯提高了13K,Fe3O4/聚苯乙烯复合体系的饱和磁化强度σs为17.43emu/g.     

Fe3O4/壳聚糖复合纳米粒子吸附剂的制备及其对Pb2+吸附性能

用乙二醇为溶剂,三氯化铁和尿素为起始反应试剂,柠檬酸为粒子表面修饰剂,通过一步溶剂热法制备Fe3 O4纳米粒子,然后以一定浓度配比的Na2 SO4与NaOH混合液为沉淀剂,通过沉淀聚合法制备Fe3 O4/壳聚糖复合纳米粒子吸附剂。利用X射线衍射仪(XRD)、红外光谱(IR)、透射电子显微镜(TEM)和物理特性测试仪(PPMS)表征样品的结构、形貌和磁性能,并使用原子吸收分光光度计(AAS)评价吸附剂对Pb2+的吸附去除性能。结果表明,Fe3O4/壳聚糖复合纳米粒子吸附剂是由磁性Fe3O4纳米球形粒子和鱼卵状壳聚糖纳米粒子聚集体复合而成,该吸附剂对Pb2+有很好的吸附去除性能,它对Pb2+的等温吸附线符合Langmuir模型,在温度298k和pH值5时,吸附剂对Pb2+的饱和吸附量为105.5mg/g。     

Fe3O4@SiO2@YF3∶Eu3+磁-光双功能复合粒子的制备与性能

采用水热法合成了Fe3O4@SiO2@YF3∶Eu3+磁-光双功能复合粒子,对其结构和性能进行了表征。XRD分析表明:Fe3O4表面包覆上了结晶良好的正交晶系的YF3。TEM照片表明:复合粒子为球形,构成核的Fe3O4颗粒的尺寸在200～350 nm之间,Fe3O4@SiO2@YF3∶Eu3+核壳结构复合粒子的尺寸约为230～380 nm,与包覆前的Fe3O4相比较,包覆后,颗粒尺寸增大,并且YF3∶Eu3+是以棒状结构连接在Fe3O4球型颗粒的表面。磁性和荧光光谱分析表明:该复合颗粒同时具有良好的发光性和磁性,使其在生物医学领域具有潜在的应用。     

无溶剂Fe3O4纳米流体的制备及表征

采用共沉淀法合成Fe3O4纳米粒子, 将含有硅氧烷基的离子型改性剂二甲基十八烷基氯化铵与Fe3O4纳米粒子进行接枝反应, 再用脂肪醇聚氧乙烯醚磺酸盐的长链阴离子交换Cl-, 在Fe3O4纳米粒子表面生成具有阴、 阳离子双电层结构的表面处理层, 得到无溶剂Fe3O4纳米流体. 研究结果表明, 在Fe3O4纳米粒子表面成功接枝了有机物长链, 改性的Fe3O4纳米粒子呈单分散分布, 其损耗剪切模量G″明显大于储能剪切模量G', 具有明显的流体行为, 在室温下即可流动.     

四氧化三铁磁性纳米微粒表面的氨基化修饰

以3-氨丙基三乙氧基硅烷(APTES)作为氨基化试剂,通过硅烷化反应使其键合于Fe3O4纳米颗粒表面,制备了表面氨基化的磁性Fe3O4纳米复合颗粒;利用红外光谱分析了产物的化学键合特征,利用电位滴定测定了合成产物表面的-NH2含量,探讨了活化方式、反应溶剂、投料比、温度、时间等因素对氨基化修饰效果的影响.结果表明,APTES成功地包覆在磁性Fe3O4纳米微粒表面;在乙醇-水体系中,在Fe3O4与APTES投料比3∶8、温度60℃下反应12h,得到的Fe3O4纳米颗粒表面APTES修饰效果最佳,表面-NH2含量高达1 400±50μmol·g-1.     

SiO_2表面包覆对Fe_3O_4磁性微球性能的影响

采用化学共沉淀法制备Fe3O4磁性纳米粒子;用柠檬酸钠进行表面修饰得到在水相中稳定分散的Fe3O4溶胶。以Fe3O4磁性纳米粒子为种子,用碱催化正硅酸四乙酯水解、缩合制备了粒径和磁性可控的核壳结构的Fe3O4@SiO2复合微球。通过FT-IR,XRD,TEM,VSM和古埃磁天平对Fe3O4@SiO2复合微球进行表征。研究了SiO2包覆对Fe3O4@SiO2复合微球性能的影响。     

叶酸对磁性Fe_3O_4纳米粒子的表面修饰

以FeCl3·6H2O作为单一铁源,1,6-己二胺作为胺化试剂,利用无模板的溶剂热方法制备了胺基功能化的磁性Fe3O4纳米粒子,并利用其键合叶酸分子,制备出表面修饰了叶酸的磁性Fe3O4复合纳米粒子。利用傅里叶变换红外光谱仪、X-射线衍射仪、透射电镜、差热-热重分析仪和振动样品磁强计对所得纳米粒子的形貌、粒径、化学组成和磁性能进行了表征。结果表明,叶酸分子通过化学键牢固键合在磁性纳米Fe3O4粒子表面,叶酸修饰的复合纳米粒子仍然具有良好的磁性能。     

Ag修饰的Fe_3O_4/TiO_2复合磁性纳米纤维的制备及光催化性能

通过静电纺丝法制备了含有Fe3O4纳米粒子的TiO2纳米纤维,采用水热法对该纤维表面进行纳米Ag修饰,制备出具有较强磁性和较好光催化性能的复合纤维.采用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和紫外-可见光谱(UV-Vis)等对样品的结构和形貌进行表征,并以罗丹明B(Rh B)水溶液降解为模型反应,考察样品在紫外光照射下的光催化性能.结果表明,所制备的TiO2为锐钛矿结构,Fe3O4纳米粒子均匀分布在TiO2纤维中,Ag纳米颗粒比较均匀地分散在磁性TiO2纤维表面.经过纳米Ag修饰后,材料的光吸收能力大为增强,吸收带红移并扩展到可见光区.在紫外光照射40 min后,合成样品对Rh B的降解率达到99.5%.此外,Fe3O4纳米粒子的存在使该材料具有较强的磁性,可通过外加磁场将其分离回收.     

Fe3O4@Cu2O纳米粒子的制备及其催化性能研究

利用室温液相还原、晶种生长的方法,成功的制备了大小形貌均一、性能稳定且具有磁性的Fe3O4@Cu2O复合纳米粒子,并且对制备的Fe3O4@Cu2O纳米粒子进行了光催化性能的研究.在以紫外光为光源的照射下,合成的Fe3O4@Cu2O纳米粒子对有机染料甲基蓝溶液起到很好的降解作用.更重要的是,在外加磁场的作用下,Fe3O4@Cu2O纳米粒子容易回收,具有良好的可循环利用性能.     

超疏水磁性Fe3O4/聚多巴胺复合纳米颗粒及其油/水分离

借助于多巴胺在Fe3O4纳米颗粒表面自聚合形成聚多巴胺薄膜制备出Fe3O4/聚多巴胺(Fe3O4/PD)复合纳米颗粒,利用扫描电子显微镜、透射电子显微镜、X射线衍射仪对样品的形貌、结构及成分进行分析.所制备的颗粒经1H,1H,2H,2H-全氟癸基三氯硅烷化学修饰后表现出超疏水性.有趣的是,超疏水性的Fe3O4/PD纳米颗粒包裹在水滴表面能形成磁性液珠,该液珠(4μL)在亲水性玻璃表面上的接触角高达164°、滚动角为8°.这些磁性液珠具有良好的机械稳定性和强度,同时研究了外部磁场驱动液珠在平面、曲面、油相中运动.结果表明,磁性液珠能够有效应用于操作微流体装置中的液体输送.水滴在Fe3O4/PD纳米颗粒构成表面的接触角超过150°,而油滴则接近0°,因此,在磁场存在下,这些颗粒能用于吸收油水混合物中的油滴而实现油水分离.此外,回收的Fe3O4/PD纳米颗粒保持着超疏水性且能再次利用.     

Synthesis and characterization of multifunctional Fe3O4/poly(fluorescein O-methacrylate) core/shell nanoparticles

Multifunctional fluorescent and superparamagnetic Fe(3)O(4)/poly(fluorescein O-methacrylate) [Fe(3)O(4)/poly(FMA)] nanoparticles with core/shell structure were synthesized via surface-initiated polymerization. First, polymerizable double bonds were introduced onto the surface of Fe(3)O(4) nanoparticles via ligand exchange and a condensation reaction. A fluorescent monomer, FMA, was then polymerized to the double bonds at the surface via free-radical polymerization, leading to form a fluorescent polymer shell around the superparamagnetic Fe(3)O(4) core. The resultant Fe(3)O(4)/poly(FMA) nanoparticles were characterized by Fourier transform infrared, nuclear magnetic resonance, and X-ray diffraction spectroscopy to confirm the reactions. Transmission electron microscopy images showed that the Fe(3)O(4)/poly(FMA) nanoparticles have a spherical and monodisperse core/shell morphology. Photoluminescence spectroscopy and superconducting quantum interference device magnetometer analyses confirmed that the Fe(3)O(4)/poly(FMA) nanoparticles exhibited fluorescent and superparamagnetic properties, respectively. In addition, we demonstrated the potential bioimaging application of the Fe(3)O(4)/poly(FMA) nanoparticles by visualizing the cellular uptake of the nanoparticles into A549 lung cancer cells.     

Facile synthesis of superparamagnetic Fe3O4@Au nanoparticles for photothermal destruction of cancer cells

Superparamagnetic Fe(3)O(4) nanoparticles with positive surface ξ-potential were synthesized via a solvothermal route. After Fe(3)O(4) was mixed with HAuCl(4) and NaBH(4), the reduced Au nanoparticles could be directly adsorbed onto the surface of Fe(3)O(4) nanoparticles. The as-synthesized nanocomposites were successfully applied to photothermal destruction of cancer cells.     

利用Fe3O4/DR膜作为催化剂前体在硅片上生长多壁碳纳米管

Fe3O4纳米粒子与正离子性的重氮树脂在硅基底的表面形成稳定自组装膜,还原后可通过化学气相沉积(CVD)法在硅基底的表面生长多壁碳纳米管.以聚丙烯酸包裹Fe3O4纳米颗粒能够有效地防止纳米粒子的团聚,并提高组装效率,得到均匀的纳米粒子自组装膜,从而获得在硅基底上均匀分布的多壁碳纳米管.     

Preparation of surface plasmon resonance biosensor based on magnetic core/shell Fe3O4/SiO2 and Fe3O4/Ag/SiO2 nanoparticles

In this paper, surface plasmon resonance biosensors based on magnetic core/shell Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were developed for immunoassay. With Fe(3)O(4) and Fe(3)O(4)/Ag nanoparticles being used as seeding materials, Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were formed by hydrolysis of tetraethyl orthosilicate. The aldehyde group functionalized magnetic nanoparticles provide organic functionality for bioconjugation. The products were characterized by scanning electronic microscopy (SEM), transmission electronic microscopy (TEM), FTIR and UV-vis absorption spectrometry. The magnetic nanoparticles possess the unique superparamagnetism property, exceptional optical properties and good compatibilities, and could be used as immobilization matrix for goat anti-rabbit IgG. The magnetic nanoparticles can be easily immobilized on the surface of SPR biosensor chip by a magnetic pillar. The effects of Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles on the sensitivity of SPR biosensors were also investigated. As a result, the SPR biosensors based on Fe(3)O(4)/SiO(2) nanoparticles and Fe(3)O(4)/Ag/SiO(2) nanoparticles exhibit a response for rabbit IgG in the concentration range of 1.25-20.00 μg ml(-1) and 0.30-20.00 μg ml(-1), respectively.     

磁性聚苯胺纳米微球的合成与表征

报道了具有核壳结构的Fe3O4-聚苯胺磁性纳米微球的合成方法和表征结果.微球同时具有导电性和磁性能.在优化的实验条件下,可得到饱和磁化强度Ms为55.4 emu/g,矫顽力Hc为62 Oe的磁性微球.微球的导电性随着微球中Fe含量的增加而下降.微球的磁性能则随着Fe含量的增加而增大.Fe3O4磁流体的粒径和磁性聚苯胺微球的粒径均在纳米量级.纳米Fe3O4粒子能够提高复合物的热性能.实验表明,磁流体和聚苯胺之间可能存在着一定的相互作用,但这种相互作用较为复杂,难于研究     

Polyaniline-coated Fe(3) O(4) nanoparticles: An anion exchange magnetic sorbent for solid-phase extraction

In this study, the capability of the prepared polyaniline-coated Fe(3) O(4) nanoparticles for magnetic solid-phase extraction of three parabens from environmental wastewater, cream, and toothpaste samples is presented. Synthesized Fe(3) O(4) nanoparticles were coated with sulfate-doped polyaniline via polymerization of aniline in the presence of Fe(3) O(4) nanoparticles and sulfuric acid. Here, polyaniline-coated Fe(3) O(4) nanoparticles are presented as anion exchange sorbent, which extract anionic form of parabens via anion exchange with dopant of polyaniline. The experimental conditions affecting extraction efficiency were further studied and optimized. The experimental results showed that maximum extraction efficiency can be obtained at 70 mL sample solution of pH 8, extraction and desorption times of 2 and 1 min, respectively, 100 μL of 3% (v/v) acetic acid in acetonitrile as eluent, and 100 mg of the adsorbent. Under these conditions, the linear dynamic ranges were 0.5-100 μg/L with good correlation coefficients (0.998-0.999). The detection limits were in the range of 0.3-0.4 μg/L and the relative standard deviations were less than 2.4 (n = 5) for the three parabens. Finally, this fast and efficient method was further employed for determination of target analytes in cream, toothpaste, and environmental wastewater samples and satisfactory results were obtained.     

Preparation and characterization of cross-linked β-cyclodextrin polymer/Fe_3O_4 composite nanoparticles with core-shell structures

Cross-linkedβ-cyclodextrin polymer/Fe₃O₄ composite nanoparticles with core-shell structures were prepared via cross linking reaction on the surface of carboxymethylβ-cyclodextrin（CM-β-CD） modified Fe₃O₄ nanoparticles inβ-cyclodextrin alkaline solution by using epichlorohydrin as crosslinking agent.The morphology,structure and magnetic properties of the prepared composite nanoparticles were investigated by transmission electron microscopy（TEM）,Fourier transform infrared（FTIR） spectrometry,X-ray diffraction（XRD） measurement,thermogravimetric analysis（TGA） and Vibrating sample magnetometry （VSM）,respectively.     

磁性Fe_3O_4-聚吡咯纳米微球的合成与表征

报道了具有核壳结构的Fe3O4 聚吡咯磁性纳米微球的合成方法和表征结果 .微球同时具有导电性和磁性能 .在优化的实验条件下 ,可得到饱和磁化强度为 2 3 4emu g ,矫顽力为 45 2Oe的磁性微球 .微球的导电性随着微球中Fe3O4含量的增加而下降 .微球的磁性能则随着Fe3O4含量的增加而增大 .Fe3O4磁流体的粒径和磁性聚吡咯微球的粒径均在纳米量级 .纳米Fe3O4粒子能够提高复合物的热性能 .实验表明 ,磁流体和聚吡咯之间存在着一定的相互作用 ,正是这种相互作用使磁性聚吡咯纳米微球的热稳定性提高 .     

Fe_3O_4/CdTe/聚氨酯纳米复合物的制备及其性能研究

由共沉淀法和Stober法制备了伯胺基功能化SiO2稳定的Fe3O4磁性纳米粒子Fe3O4@SiO2-NH2;Fe3O4@SiO2-NH2与二异氰酸酯及咪唑阳离子二醇、聚乙二醇的反应使其表面形成阳离子型聚氨酯稳定层;通过阳离子型聚氨酯与CdTe量子点表面修饰的巯基乙酸间的电荷相互作用,制备得到了Fe3O4/CdTe/聚氨酯纳米复合物.用X射线衍射(XRD)、红外吸收光谱(FTIR)、热重分析(TGA)、透射电子显微镜(TEM)、磁强计(VSM)、紫外吸收光谱(UV)、荧光发射光谱(PL)表征了该纳米复合物的结构与性能.结果表明,CdTe量子点均匀地分散在Fe3O4@SiO2磁性纳米粒子周围,所得纳米复合物在溶剂中分散均匀,不团聚,且具有超顺磁性,并保持了CdTe量子点的荧光性能.