超高效液相色谱法测定水产品中甲砜霉素和氟甲砜霉素残留

建立了一种同时测定水产品中甲砜霉素和氟甲砜霉素药物残留的超高效液相色谱(UPLC)方法。样品经乙酸乙酯提取,正己烷液-液分配除脂,过HLB固相萃取小柱,用3mL10%甲醇淋洗,5mL100%甲醇洗脱,洗脱液用氮气吹干,残渣用1mL10%乙腈水溶液定容。采用超高效液相色谱分离,二极管阵列检测器检测,外标法定量。甲砜霉素在0.05~2.0mg/L,氟甲砜霉素在0.025~1.0mg/L范围线性关系良好,相关系数分别为0.9996、0.9999;样品加标平均回收率分别为80.0%、95.8%;相对标准偏差分别为5.6%、11.2%,甲砜霉素、氟甲砜霉素检出限分别为10μg/kg、5μg/kg。     

高效液相色谱-串联质谱法同时测定水产品中氯霉素、甲砜霉素和氟甲砜霉素的残留量

建立了水产品中氯霉素、甲砜霉素和氟甲砜霉素药物残留量同时测定的高效液相色谱-串联质谱方法。以氘代氯霉素做内标,选择乙酸乙酯提取,HLB固相萃取柱净化,洗脱液氮气吹干,采用LC-MS/MS选择反应监测(SRM)负离子模式进行定性、定量分析。结果表明:氯霉素的检出限(LOD)为0.01μg/kg,甲砜霉素和氟甲砜霉素检出限(LOD)为0.03μg/kg,检测结果的相对标准偏差为3.3%～9.7%(n=6),加标回收率达到78.6%～110.5%。该方法在水产品中氯霉素、甲砜霉素和氟甲砜霉素药物的残留测定中具有很好的应用前景。     

高效液相色谱-串联质谱法同时测定蜂胶、蜂胶原料保健食品中的氯霉素、甲砜霉素与氟甲砜霉素

建立了同时测定蜂胶、蜂胶原料保健食品(片剂、硬胶囊、软胶囊3种剂型)中氯霉素、甲砜霉素和氟甲砜霉素残留的高效液相色谱-串联质谱(HPLC-MS/MS)方法。样品经0.1 mol/L盐酸溶解,涡旋混匀,超声提取后,通过HLB柱串接NH_2固相萃取柱净化。采用Waters ACQUITY UPLC~?BEH C_(18)(2.1 mm×100 mm,1.7μm)色谱柱进行分离,以0.1%甲酸水-乙腈为流动相梯度洗脱,经HPLC-MS/MS测定,电喷雾离子源负离子模式检测,外标法定量。结果表明3种目标分析物在0.10～20.0μg/L范围内线性关系良好,相关系数(r~2)均大于0.999;蜂胶原胶、片剂和软胶囊剂型中3种目标物的检出限(LOD)为0.037～0.083μg/kg,定量下限(LOQ)为0.12～0.28μg/kg;硬胶囊剂型中的LOD为0.39～0.47μg/kg,LOQ为1.28～1.57μg/kg;在2.5、5.0、10.0μg/kg加标水平下,3种目标物的回收率为66.6%～120%,相对标准偏差(RSD)为0.80%～11%。将该方法应用于45个实际样品检测,其中氯霉素的检出率为22.22%,最大残留量为14.32μg/kg;氟甲砜霉素的检出率为17.78%,最大残留量为21.62μg/kg。该方法操作简单、灵敏度高、适用性强,能够满足蜂胶、蜂胶原料保健食品中此类药物残留的检测要求。     

高效液相色谱/串联质谱法同时测定虾中氯霉素、甲砜霉素和氟甲砜霉素残留量

用高效液相色谱／串联质谱(LC／MS,／MS)同时测定虾中的氯霉素(CAP)、甲砜霉素(TAP)和氟甲砜霉素(FF)。均质后的虾样品,采用碱化乙酸乙酯提取。浓缩提取物经液．液分配(LLP)去除脂肪,C18固相萃取(SPE)柱净化后,采用LC／MS／MS电喷雾电离(ESI),负离子,多反应监测(MRM)模式检测,外标法定量。检出限为：氯霉素和氟甲砜霉素0．01ng/g;甲砜霉素为0．05ng／g。在添加浓度0．1～2．0ng/g范围内,氯霉素回收率为73．9％～96．0％;甲砜霉素回收率为78．6％～99．5％;氟甲砜霉素回收率为74．9％～103．7％;相对标准偏差(RSD)均小于6．4％。     

高效液相色谱串联质谱法同时测定饲料中氯霉素、甲砜霉素与氟甲砜霉素残留

以D5-氯霉素为内标,建立了高效液相色谱-电喷雾串联质谱测定饲料预混料、配合饲料中氯霉素、甲砜霉素与氟甲砜霉素含量的方法.样品磨碎后,采用乙酸乙酯提取,离心后上清液于45℃下氮气吹干,溶解残渣并用正己烷液液萃取净化处理,经C18固相萃取净化后,通过Agilent Eclipse C18(150 mm ×4.6 mm,5μ nn)色谱柱以甲醇-0.1％甲酸作流动相梯度洗脱分离,采用电喷雾电离(ESI)、多反应监测(MRM)负离子扫描方式进行定性与定量分析.方法的检出限(LOD)为0.5μg/L,定量下限(LOQ)为1.0 μg/L,待测物与内标物定量离子的峰面积比值与待测物的质量浓度在0.5～10.0 μg/L范围内呈良好线性关系,相关系数(r2)不低于0.9990.在0.5～2.0 μg/kg范围内,3个水平的加标回收率为78％～107％,相对标准偏差(RSDs,n=6)均小于10％.     

快速检测水产饲料中氯霉素、甲砜霉素、氟甲砜霉素残留

建立了水产养殖饲料中氯霉素、甲砜霉素、氟甲砜霉素3种氯霉素类抗菌素同时检测的液相色谱-串联质谱(HPLC-MS/MS)方法。优化了样品前处理过程中提取溶剂、提取溶剂碱性、固相萃取柱类型,采用三重串联四级杆质谱的电喷雾电离负离子模式和选择离子反应监测模式,建立了水产饲料中3种氯霉素类抗菌素HPLC-MS/MS的同时分析方法。方法的加标回收率为84.7%~101.0%,相对标准偏差3.7%~7.0%(n=6),检出限为0.1~0.2μg/kg,定量限为0.3~0.5μg/kg。     

高效液相色谱-电喷雾电离三级四极杆质谱测定鸡肉中氯霉素、甲砜霉素和氟甲砜霉素的残留量

建立了鸡肉中3种氯霉素类抗生素残留的高效液相色谱-电喷雾电离三级四极杆质谱(HPLC-ESI-MS-MS)测定法。该方法采用多反应监测(MRM)负离子模式,可一次对鸡肉中的氯霉素、甲砜霉素和氟甲砜霉素进行定性和定量。该方法仅需1 g样品,并省去固相萃取步骤,具有操作简便、有机试剂消耗量少、测定周期短等优点。方法的检出限为0.010 μg/kg,测定低限为0.100 μg/kg,线性范围为0.050~1.00 μg/L,加标回收率为69.0%~92.8%,相对标准偏差为6.3%~12.9%。     

超高效液相色谱-串联质谱法测定畜禽副产品中氯霉素和氟甲砜霉素残留量

建立了超高效液相色谱-串联质谱测定畜禽副产品中氯霉素和氟甲砜霉素残留量的方法。样品经碱性乙酸乙酯提取,正己烷脱脂后,直接采用电喷雾电离(ESI)多反应监测(MRM)负离子模式检测,氯霉素用同位素内标定量,氟甲砜霉素用外标法定量。氯霉素和氟甲砜霉素在0.2～50μg/L范围内线性良好,相关系数达到0.9999;检出限均为0.04μg/kg;氯霉素回收率为89.6%～112.0%,RSD为5.4%～8.1%;氟甲砜霉素回收率为90.3%～110.0%,RSD为5.1%～8.0%。方法可用于畜禽副产品中氯霉素和氟甲砜霉素残留量测定。     

TiO2修饰磁性石墨烯-通过型固相萃取净化人血中氯霉素、甲砜霉素和氟甲砜霉素

采用TiO₂修饰磁性石墨烯作为通过型固相萃取柱填料,并用于净化去除血液样品中磷脂类物质的干扰,建立了一种快速、高效、准确的测定人血中残留氯霉素、甲砜霉素与氟甲砜霉素的超快速液相色谱-串联质谱分析方法。样品经乙腈提取,使用TiO₂修饰磁性石墨烯-通过型固相萃取柱进行净化处理,以Eclipse Plus C18色谱柱（100 mm×2.1 mm,1.8 μm）分离,以0.08%（v/v）氨水溶液与0.08%（v/v）氨水乙腈溶液为流动相梯度洗脱,电喷雾离子源多反应监测负离子模式下检测,采用内标法定量。3种目标化合物在0.1~10.0 μg/L范围内具有良好的线性（决定系数r²>0.999）,定量限（S/N>10）为0.056~0.082 μg/L,目标化合物的加标回收率为90.0%~105%,相对标准偏差为1.2%~6.6%。该方法可用于临床血样中残留氯霉素、甲砜霉素与氟甲砜霉素的快速筛查和确证分析。     

气相色谱-质谱联用法测定动物组织中氯霉素、氟甲砜霉素和甲砜霉素的残留量

建立了气相色谱-负离子化学电离源质谱同时测定动物组织中氯霉素(CAP)、甲砜霉素(TAP)和氟甲砜霉素(FF)残留量的方法。样品用乙酸乙酯提取,正己烷分配去脂肪,再用Florisil柱进一步净化,甲苯作为反应介质,用N,O-双(三甲基硅基)三氟乙酰胺(BSTFA)-三甲基氯硅烷(TMCS)(体积比为99∶1)进行硅烷化处理,用间硝基氯霉素(m-CAP)作为内标进行测定。CAP的检测限可达到0.03 μg/kg,TAP和FF的检测限可达到0.2 μg/kg;上述3种药物的标准曲线的线性相关系数均大于0.99。CAP,FF和TAP的批内测定的精密度(以相对标准偏差表示)依次为5.5%,10.4%和8.8%;批间测定的精密度依次为7.4%,20.7%和19.1%。回收率为80.0%~111.5%,相对标准偏差为1.2%~15.4%。该方法前处理步骤简单,处理后杂质干扰少,灵敏度高,适用性强,可用于猪肉及禽类、水产品等多种动物组织中氯霉素类药物残留的检测。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.