采用溶胶-凝胶技术涂层的新型固相微萃取方法及其应用

将溶胶-凝胶技术应用于SPME固相涂层的制备,涂制的端羟基-聚二甲基硅氧烷固相涂层热稳定性好,萃取时间和解吸时间短,对极性化合物及非极性化合物均有较强的萃取富集能力。扫描电镜图显示涂层表面为多孔结构。采用该涂层的SPME方法在对环境样品的分析中获得了令人满意的效果。     

羧基化单壁碳纳米管涂层同时测定纯净水中的烷基酚和双酚A

用溶胶-凝胶方法制备了羧基化碳纳米管溶胶凝胶固相微萃取涂层,采用顶空固相微萃取-气相色谱法测定纯净水中的烷基酚和双酚A.优化了萃取涂层的萃取时间、萃取温度、盐浓度以及解析时间等实验参数.结果表明,在萃取温度为90℃和盐浓度为0.36 g/mL的条件下萃取30 min,250℃下解析3 min,涂层的萃取效果最好.与商用...     

固相微萃取涂层制备方法研究进展

涂层是固相微萃取技术的核心,近年来出现的各种新型涂层材料和制备技术,进一步拓宽了固相微萃取技术的应用范围.该文介绍了各种新型固相微萃取介质的发展,并综述了各种新型固相微萃取涂层的制备方法,包括直接制备、溶胶-凝胶技术、化学键合与聚合、分子印迹技术、树脂固载技术、电化学沉积等.     

溶胶-凝胶固相微萃取涂层及其在农药残留分析中的应用

利用溶胶-凝胶(sol-gel)技术制备固相微萃取(SPME)涂层材料.通过硅醇盐前驱体与涂层聚合物羟基硅油(OH-TSO)的水解共聚的方法,成功地制备了聚二甲基硅氧烷sol-gel 涂层的SPME 萃取头,并以农药的混合标准水溶液为研究对象,用直接-固相微萃取-气相色谱法(GC)对涂层的性能进行考察,制成的萃取头适用于多种农药残留的萃取分离分析.     

固相微萃取涂层及其形貌特征研究

采用物理涂渍、溶胶-凝胶技术(sol-gel)制备了固相微萃取(SPME)固相涂层：),γ-Al2O3涂层、聚丙烯酸树脂涂层、聚酰亚胺-二氧化硅溶胶凝胶涂层、聚酰亚胺-二氧化钛涂层。通过扫描电镜显示涂层表面形貌,并比较了萃取容量与涂层形貌间的关系.证明涂层的微观形态结构对涂层性能具有一定的影响,可以通过微观形态分析,了解不同微观结构对宏观性质的影响。     

固相微萃取新型涂层的制备和特性(英文)

 以聚甲基苯基乙烯基硅氧烷为主要成分 ,采用溶胶 凝胶技术和自由基引发交联反应的方法首次制备了一种固相微萃取新涂层 ,并与气相联用 ,分析了芳香族化合物 ,考察了它的萃取性能。结果表明 :该涂层提供了大的比表面积 ,可获得高的萃取效率。与相应的商用固相微萃取涂层相比 ,该涂层具有更好的灵敏度和选择性 ,且热稳定性好 ,使用寿命长。     

固相微萃取萃取头制备技术及试验方法的进展

在阐述固相微萃取的平衡理论及非平衡理论基础上,重点探讨了萃取头的制备技术和相关试验方法的进展。除了介绍商品化通用萃取头的制备技术外,还论述了溶胶-凝胶法、电沉积法、碳素基体吸附法、高温环氧树脂固定法等新的制备技术;探讨了固相微萃取试验方法中萃取模式和萃取头的选择、萃取条件优化以及方法的灵敏度、精度、自动化等的评价;进一步总结了固相微萃取的应用现状,对固相微萃取的发展方向作了展望。     

固相微萃取活性炭涂层萃取头对水中有机物的定性分析

对自制的固相微萃取（SPME）活性炭（AC）涂层萃取头进行了评价。该涂层富集能力强，对苯系物（BTEX）的富集率达到14．5～19．2倍；热稳定性好，最高使用温度可达290℃；使用寿命长，260℃解吸条件下可反复使用140次以上。其与聚二甲基硅氧烷（PDMS）涂层相比，尽管萃取量略小，但其具有更高精密度和准确度，而且其萃取和解吸平衡时间减少为聚二甲基硅氧烷（PDMS）涂层的一半以上。应用AC涂层SPME法和液-液萃取（LLE）法对松花江水进行了气相色谱-质谱（GC-MS）定性比较分析。两种方法分别检测到50种（主要是挥发和半挥发性的弱极性和非极性）和44种（主要是挥发性差、与正己烷相容性较强）化合物。     

选择性固相微萃取涂层的研究进展

固相微萃取装置的核心部分是它的涂层,涂层的种类和厚度是影响分析灵敏度和选择性的最重要因素。具选择性的涂层可增强固相微萃取的分离能力,扩展它的应用范围。本文介绍了固相微萃取的类型,综述了近年来选择性固相微萃取涂层的研究进展,包括溶胶-凝胶涂层、限进介质涂层、分子印迹涂层等涂层的研制及应用。     

聚苯乙烯-丙烯酸丁酯固相微萃取新型吸附质的研究与应用

实验以丙烯酸丁酯和苯乙烯为单体 ,过氧化苯甲酰为引发剂 ,醋酸丁酯和甲苯作混合溶剂 ,溶剂用量与单体混合物的体积相同。采用溶液聚合的方法合成了一种新型固相微萃取吸附质 (苯乙烯 -丙烯酸丁酯共聚物 ) ,研究了此聚合物作为固相微萃取吸附质的性能。用顶空萃取法对水中低级芳烃化合物进行了萃取实验 ,考察了此高聚物涂层的热稳定性及单体比例与萃取率的关系。将自制涂层与PDMS涂层对低级芳烃化合物萃取量进行了比较 ,反映了苯乙烯 丙烯酸丁酯聚合物涂层的特点。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.