环氧防水涂料固化剂酮亚胺合成方法及性能

环氧树脂防水涂料的性能与固化剂有着很大的关系.本文作者合成出一种酮亚胺固化剂,通过实验考察了影响其产率的因素,并与其他三种常用的固化剂在性能上进行了比较.结果表明,酮亚胺的固化效果优良,当甲基异丁基酮(MIBK)与间苯二甲胺(MXDA)单体投料比为3∶1时,产率较高,最佳的合成反应温度为130℃,反应时间为3.5h.     

氧化锌催化二苯甲烷二氨基甲酸甲酯分解反应

 对氧化锌催化二苯甲烷二氨基甲酸甲酯(MDC)分解制二苯甲烷二异氰酸酯(MDI)反应进行了研究,考察了反应温度、反应时间、催化剂用量以及原料浓度等对反应的影响. 结果表明,适宜的反应条件为催化剂用量2.1%, MDC浓度3.5%, 反应温度260 ℃, 反应时间20～30 min, 此时MDC转化率为99.5%, MDI产率为40.0%, 碳化二亚胺改性二苯甲烷二异氰酸酯(C-MDI)的产率为49.7%. 进一步研究发现,15%的醋酸锌溶液经草酸铵沉淀(不陈化)后,在500 ℃下焙烧4 h得到六方相的氧化锌,晶体的平均粒径为100～200 nm, 以其为催化剂时MDC转化率为99.1%, MDI的产率为52.1%, 同时还得到27.7%的 C-MDI.     

纳米Cu2O催化二苯甲烷二氨基甲酸苯酯无溶剂热分解制备二苯甲烷二异氰酸酯

研究了无溶剂条件下纳米Cu₂O催化二苯甲烷二氨基甲酸苯酯(MDPC)热分解制备二苯甲烷二异氰酸酯(MDI),考察了纳米Cu₂O的制备条件与反应条件对MDPC热分解反应性能的影响.结果表明,水解法制备的纳米Cu₂O在Ar中于300℃焙烧2h,其催化性能最佳;最佳的反应条件为Cu₂O用量为原料总重的0.06%,反应温度220℃,反应压力0.6kPa,反应时间12min,此时MDPC转化率达到99.8%,MDI选择性86.2%.     

2α-甲基-2β-溴甲基青霉烷酸二苯甲酯的合成

以6,6-二氢青霉烷酸二苯甲酯-1-氧化物(Ⅰ)和2-巯基苯并噻唑为原料,通过热裂解开环反应和溴代环合反应,制备得到了β-内酰胺酶抑制剂他唑巴坦关键中间体2α-甲基-2β-溴甲基青霉烷酸二苯甲酯(Ⅲ)。考察了反应温度、反应时间、物料比、催化剂用量对目标产物的影响。结果表明,在n(Ⅱ)∶n(HBr)∶n(Na NO_2)=1∶3∶6,催化剂质量分数为4%,-5℃反应2. 5h的条件下,收率为85. 4%。产物结构经1HNMR、FTIR、MS等技术手段得到验证。     

聚对二亚甲基苯的激光离解质谱分析

聚对二亚甲基苯的激光离解质谱分析高文德，刘维铬，王守文，马洪，敖十庆，邓万卉，许建光（四川联合大学成都６１００６４）崔保顺，唐永建，马宏伟（中国工程物理研究院成都６１０００３）关键词激光，质谱，聚对二亚甲基苯聚对二亚甲基苯难溶于有机溶剂且加热时立即分...     

5,7-二甲氧基-4-甲基苯酞和5,7-二羟基-4-甲基苯酞的新合成方法

以3,5-二甲氧基苯甲醇为起始原料, 经过五步反应, 合成了5,7-二甲氧基-4-甲基苯酞和5,7-二羟基-4-甲基苯酞这两个用于合成霉酚酸的重要中间体, 产率分别达到80%和72%. 6-氯甲基-2,4-二甲氧基苯甲醛经过亚氯酸钠氧化成酸的同时发生内酯化反应生成5,7-二甲氧基苯酞是最关键的一步.     

交联型非线性光学聚合物的合成

利用六亚甲基二异氰酸酯的缩二脲与对硝基偶氮苯甘油单醚的电场极化交联反应合成交联型聚合物非线性光学材料．采用变温红外光谱、ＤＳＣ、紫外可见吸收光谱研究交联反应时间对非线性生色基团的取向及松弛的影响．     

N-苄氧基邻苯二甲酰亚胺的合成

以N－羟基邻苯二甲酰亚胺、氯化苄和乙酸钠或三乙胺为原料,通过控制反应温度和反应时间高产率地制备了N－苄氧基邻苯二甲酰亚胺。     

对硝基邻苯二乙醚合成技术研究

以邻苯二酚与溴乙烷为原料、聚乙二醇为相转移催化剂合成邻苯二乙醚,再经过冰醋酸和硝酸硝化得到对硝基邻苯二乙醚。研究了反应温度、反应时间、原料摩尔比和催化剂用量等对反应收率的影响,获得了合成邻苯二乙醚的优化工艺条件:n(C6H4(OH)2)∶n(NaO H)∶n(C2H5Br)=1∶2.6∶2.4,反应温度80℃,反应时间4h,催化剂用量2g,该反应条件下邻苯二乙醚平均收率88%。混酸硝化条件下合成对硝基邻苯二乙醚的较佳工艺条件为n(C10H14O2)∶n(HNO3)=1∶1.2,乙酸25mL,反应时间30min,反应温度20℃,该反应条件下对硝基邻苯二乙醚平均收率为99%。     

间二氟苯溴化反应产物的气相色谱-质谱分析

采用气相色谱-质谱(GC/MS)法对间二氟苯溴化反应产物的组成与结构进行了分析,并对间二氟苯溴化反应的选择性及反应条件进行了初步探讨。结果表明:间二氟苯的溴化反应具有较强的选择性,其主要反应产物为1-溴-2,4-二氟苯,副产物为1-溴-2,6-二氟苯、1-溴-3,5二氟苯及二溴代间二氟苯等溴化物。该反应的反应条件对产物组成有较大影响。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.