首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
利用从头算和RRKM理论研究了一氟二氯代甲烷热解离动力学,并得到了一套热力学和动力学参数。研究了三种不同的解离通道:(1)HCl+CFCl_2,(2)Cl+CHFCl,(3)HF+CCl_2,它们的活化能分别为:243.3、258.9、309.8kJ/mol。研究结果表明,氯化氢消除反应和碳氯键简单断键反应是两个主要的并且是竞争的通道,三个反应通道的高压速率常数分别为k_1=8.74×10~(14)exp(-29163T)_s~(-1),k_2=7.09×10~(15)exp(-31121/T)_s~(-1),R_3=3.87×10~(11)exp(-37039/T)_s~(-1),它们都具有明显的温度和压力依赖关系。  相似文献   

2.
从合成气制取液体燃料的浆态床FT合成/固定床ZSM-5改质的反应系统由I段鼓泡浆液反应器(内径40mm,高4500mm)和Ⅱ段固定床ZSM-5反应器(内径40mm,高900mm)组成。在温度250~280℃(I段),300~340℃(Ⅱ段),压力1.5~2.5MPa,空速2.0NL/gFe.h(I段),500~1000h^-2(Ⅱ段),H2/CO比0.5~1.5和气速1~2cm/s范围内,考察了工  相似文献   

3.
从合成气制取液体燃料的浆态床FT合成/固定床2SM-5改质的反应系统由Ⅰ段鼓泡浆液反应器(内径40mm,高450Omm)和Ⅱ段固定床ZSM-5反应器(内径40mm,高900mm)组成,在温度250~280℃(Ⅰ段),300~340℃(Ⅱ段),压力1.5~2.5MPa,空速2.0NL/gFe·h(Ⅰ段),500~1000h ̄-1(Ⅱ段),H_2CO比0.5~1.5和气速1~2cm/s范围内,考察了工艺参数对反应性能的影响,1000h以上的寿命试验的平均结果为:合成气单程转化率65.1%,产率100g/Nm ̄3(Co+H_2),总烃生产达350g/Fe。使用富CO合成气时,达110g/Nm ̄3(CO+H_2)。实测的FT合成反应热为2938;5kJ/Nm ̄3(CO+H_2)。长期运转试验表明,工艺流程合理,设备操作和温度控制可靠。采用的浆液循环回路方法可初步分离蜡中的催化剂。  相似文献   

4.
在不同的温度下,考察了六氰合铁配阴离子「Fe(CN)5」^4-还原trans-「Co(en)2(ImH02」^3+的反应动力学。结果表明,反应遵循H.Taube所提出的外配位界电子传递机理。在25℃,I=0.5mol.L^-1,trans-「Co(en)2(ImH)2」^3+/「Fe(CN)6」^4-反应体系的前驱配合物离子对形成常数为Q1p=98.9mol^-1.L,电子转移速率常数为Km=1.  相似文献   

5.
通过SnCl_2对化合物Me_2Si[η~5-C_5H_4Fe(CO)]_2(μ-CO)_2(Ⅰ)中Fe-Fe键的插入反应以及Ⅰ被Na-Hg齐还原所生成的相应双铁负离子{Me_2Si[η~5-C_5H_4Fe(CO)_2]_2}~(2-)与SnR_2Cl_2(R=Me,Ph)的亲核反应,合成了环状化合物Me_2Si[η~5-C_5H_4Fe(CO)_2]_2SnR_2[R=Cl(1),Me(2),Ph(3)]。以元素分析、IR和~1HNMR谱表征了它们的结构,并用X射线衍射测定了配合物3的晶体结构。3为单斜晶系,空间群P2_1/n,a=1.0384(3)nm,b=1.6384(1)nm,c=1.5762(5)nm,β=97.93(2)°,V=2.656(2)nm~3,Z=4,Dx=1.71g/mL。  相似文献   

6.
王建华  何荣桓 《分析化学》1993,21(11):1289-1292
依据诱导反应原理,提出了同时测定多组份的动力学方法,并以停流流动注射分析研究了Fe(Ⅱ),Ti(Ⅲ)及V(Ⅳ)诱导的Cr(Ⅵ)-I^-反应体系,建立了铁,钛和钒同时测定的条件。对铁,钛和钒测定的线性范围分别为0-2.2μg/ml,0-3.1μg/ml及0-1.8μg/ml,检测限分别为0.012,0.020和0.018μg/ml。  相似文献   

7.
邻联甲苯胺-过氧化氢催化光度法测定钴   总被引:2,自引:0,他引:2  
李竹云  崔孟忠  郑莹 《分析化学》2000,28(8):1049-1049
1引言 在碱性介质中,痕量Co(Ⅱ)见对H2Q2氧化邻联甲苯胺(o-Tolidine)的显色反应具有强烈的催化作用,探讨了利用该反应进行痕量Co(Ⅱ)测定的影响因素,建立了测定痕量Co(Ⅱ)的催化动力学光度法,该方法的灵敏度为1.78 × 10-6g/L,测定的线性范围为0.8~3.6 μg/L Co2+,应用于维生素B12中痕量Co(Ⅱ)的测定,结果满意。2实验部分2.1仪器与试剂 721-100型分光光度计;电热恒温水浴槽;Nicolet FT-IR 5DX红外光谱仪。钴(Ⅱ)标准溶液:1mg/L;…  相似文献   

8.
用QCISD(T)/6311+G(3df,2p)(简称QCI)计算了BH-(2Π),BF-(2Π),BH(1∑),BeH-(1∑),BeF-(1∑)和BF(1∑)的较完整的势能曲线,探讨了这些体系的稳定性和解离过程.同时用Morse函数和ER函数拟合得到势能曲线,用拟合结果计算谐性频率和非谐性频率,并与已有的实验数据(BH和BF分子)进行比较,由此考察了QCI理论方法在远离平衡构型时的可靠性.对于因单参考态近似导致的反常势能曲线进行了CASSCF计算.还比较了QCI和G2理论中标准的MP2(ful)/631平衡几何构型及其对QCI总能量的影响.  相似文献   

9.
动力学光度法测定痕量镉的研究   总被引:11,自引:2,他引:11  
陈国树  郭岚 《分析化学》1994,22(6):583-585
本研究了氨水介质中,痕量镉阻抑过氧化氢氧化偶氮胂1褪色的新指示反应及其动力学条件,建立了动力学光度法测定痕量镉的新方法,方法检出限为2.7×10^-12gCd^2+/ml,测定范围为0-1.0μgCd^2+/25ml。  相似文献   

10.
陈寿山  滑艳玲 《结构化学》1994,13(3):211-215
报道了双(1-正戊基环己基茂)二氯化钛[(η5-C5H4C(CH2)5(C5H11-n]2TiCl2(I)及双(1-甲基-1-(α-噻吩基)乙基环戊二烯基)二氯化钛[η ̄5-C5H4C(CH3)_2-]2TiCl2(Ⅱ)的晶体结构和分子结构。二者均系单斜晶系,(I)的空间群为P2/n,晶胞参数a=14.180(2),b=6.562(1),c=17.046(3),β=99.63(1)°,Z=2,V=1563.8,Dx=1.188g/cm3,F(000)=596,Mr=553.56,λ=0.71073μ=4.59cm-1,R=0.058,Rw=0.066;(1)的空间群为C2/c,晶胞参数a=25.713(1),b=6.617(1),c=13.591(1),β=92.78(2)°,Z=4,V=2309.8,Dx=1.430g/cm3,Mr=497.41,λ=0.71073,μ=7.822cm-1,F(000)=1032,R=0.055,Rw=0.072。茂环上取代基对茂环金属化合物的结构产生较大影响,空间阻碍的增大使得取代基与茂环相连C-C单键增长。  相似文献   

11.
A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.  相似文献   

12.
The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp3)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp2)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp2)?H and aliphatic 1,5- and 1,6-C(sp3)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp3)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp2)?H insertion.  相似文献   

13.
N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).  相似文献   

14.
An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y1 and Y2. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.  相似文献   

15.
In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.  相似文献   

16.
Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.  相似文献   

17.
用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.  相似文献   

18.
19.
A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu0 as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than CuI in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).  相似文献   

20.
(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C60, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号