磁性Y-MOF@SiO2@Fe3O4催化剂的制备及其在Aza-Micheal加成反应中的性能

在磁性SiO₂@Fe₃O₄纳米微球表面原位合成包覆不同含量的Y-MOF,从而制备出新型磁性Y-MOF@SiO₂@Fe₃O₄催化剂。采用XRD、TEM、FT-IR、VSM和N₂吸附-脱附测试等手段对催化剂的结构进行表征,并且评价了催化剂对苯胺和丙烯酸甲酯的Aza-Micheal加成反应性能。结果表明Y-MOF能均匀包覆在磁性SiO₂@Fe₃O₄纳米微球表面,形成具有核壳结构的磁性Y-MOF@SiO₂@Fe₃O₄催化剂,催化剂具有良好的超顺磁性。Y-MOF含量为43.3%（w/w）的Y-MOF@SiO₂@Fe₃O₄催化剂,在苯胺和丙烯酸甲酯的Aza-Micheal加成反应表现出最好的催化性能,丙烯酸甲酯的转化率为88.3%时,N-（β-甲氧碳酰乙基）苯胺的选择性可达99.8%。反应后的催化剂可以通过外磁场容易回收,并且重复使用5次其转化率和选择性没有明显下降。     

具有C2对称的氮磷-氧磷配体双噁唑啉磷乙烷的合成及在不对称催化加氢中的应用

利用易得的光学纯N-甲基氨基醇与1,2-双(二氯磷)乙烷缩合合成了一类新的具有C₂对称轴的氮磷-氧磷配体(R,R)-双噁唑啉磷乙烷(BOAPE) 1～4. 该类配体不仅具有C₂对称结构和刚性五元环, 还具有富电子特性, 利用500 MHz进行了¹H NMR, ³¹P NMR, ¹³C NMR表征. 与这些配体配位形成的Rh配合物用于N-苯甲酰基脱氢丙氨酸衍生物和α-功能化酮不对称加氢, 分别可以得到99%和98%的ee. 这类配体比它们相对应的非C₂对称的氮磷-氧磷化合物(AMPP)配体具有更高的对映选择性. 在这四个新的配体中配体(R,R)-Ph-BOAPE (2)的催化性能最优. 催化剂[Rh(COD)(R,R)-Ph-BOAPE]BF₄的半反应周期t_1/2和周转频率(TOF)在N-苯甲酰基肉桂酸甲酯的不对称加氢反应中分别为12 min和6.5 min^－1.     

无水AlCl3催化合成N,N-二氰乙基甲基苯胺的研究

报道了AlCl₃和AlCl₃-ZnCl₂组成的催化体系对邻、间、对甲基苯胺三种异构体与丙烯腈发生加成反应合成相应的N,N-二氰乙基甲基苯胺. 其结果表明: AlCl₃对该类反应具有很高的催化效率, AlCl₃-ZnCl₂组成的催化体系比AlCl₃的催化效率更高, 其中间位、对位产物收率达92%～94%.     

ZrO4/SiO2-Al2O3催化肉桂醛MPV转移加氢性能

以九水合硝酸铝（Al（NO₃）₃·9H₂O）与正硅酸乙酯（TEOS）为前驱盐,采用溶胶-凝胶法制备一系列不同Al₂O₃含量的SiO₂-Al₂O₃复合氧化物,并通过浸渍硝酸氧锆引入ZrO₂,制备ZrO₂/SiO₂-Al₂O₃复合氧化物催化剂,考察催化剂在肉桂醛（CAL）MPV转移加氢中的催化性能,并结合N₂物理吸附、X射线粉末衍射（XRD）、傅里叶变换红外光谱（FTIR）、NH₃-程度升温脱附（NH₃-TPD）、Py-原位红外（Py-IR）等技术,研究催化剂结构、织构以及表面性质与其催化性能间的构效关系.研究表明,所制备的催化剂均以L酸为主,并含有少量B酸中心,这使得加氢产物以肉桂醇（COL）为主,并含有少量1-苯丙烯-2-丙基醚（CPE）.Al₂O₃含量不仅影响催化剂表面的酸中心数量,而且对催化剂的织构参数有较大影响.随Al₂O₃含量的增加,催化剂表面L酸与B酸中心均有所增加,而孔径则持续变小,这使得催化反应呈现CAL转化率先增加后减少、目标产物COL选择性先稍有减小后有所增加的趋势.在Si/Al比为2时,催化剂具有最优的催化性能,优化反应条件下,CAL转化率达96%,目标产物COL选择性达90%.     

S2N2环桥连配合物的MO研究

本文根据MAD-SCC-EHMO法的计算结果，对典型硫氮环S₂N₂与过渡金属单啮和双啮桥连的配合物的电子结构和成键情况做了研究。用衡量相对稳定性的三个指标：稳定性能，HOMO-LUMO能隙和重迭布居比较了1∶2，1∶1和2∶1型配合物的稳定性，并用碎片分子轨道法分析了S₂N₂环的分子轨道与过渡金属d轨道间的相互作用。     

Ag/ZrO2催化剂上的1,2-丙二醇选择性气相氧化反应

采用浸渍法制备了一系列Ag/ZrO₂催化剂, 考察了Ag/ZrO₂催化剂对1,2-丙二醇选择性氧化合成丙酮醛反应的催化性能. 实验结果表明: 在原料气配比为V(N₂)∶V(O₂)＝300∶19, n(O₂)/n(alcohol)＝1.2, 反应物液时空速为3.2 g/(g•h), 反应温度为673 K时, 1,2-丙二醇选择性氧化合成丙酮醛反应的转化率为95.7%, 选择性为55.3%, 高于传统电解银催化剂. UV-Vis DRS和XPS的研究结果表明: 在Ag/ZrO₂催化剂上存在大量的Ag^＋和Ag_n^δ＋有利于促进催化活性的提高.     

Pd(OAc)2/Cu(OTf)2在离子液体BMImPF6中催化苯乙烯二聚反应的研究

在离子液体BMImPF₆中, 用不同的钯催化剂和Lewis酸三氟甲磺酸铜Cu(OTf)₂共催化苯乙烯二聚反应, 发现用Pd(OAc)₂/Cu(OTf)₂作催化剂, Pd/Cu物质的量之比为1～4时, 可高产率高选择性地获得苯乙烯二聚产物1,3-二苯基-1-丁烯. BMImPF₆对催化剂有较好的溶解性, 可固定催化剂体系, 使催化剂有效地与产品分离. 同时, α-甲基苯乙烯的二聚反应表明, 室温下不发生反应, 提高温度有利于反应进行.     

Ni/SiO2-Al2O3催化乙酰丙酸加氢制γ-戊内酯

采用溶胶-凝胶法制备了一系列不同Al₂O₃含量的SiO₂-Al₂O₃复合氧化物,以该系列复合氧化物为载体,采用等体积浸渍法制备了Ni负载量15%（重量百分比）的催化剂,用于催化乙酰丙酸加氢制γ-戊内酯.采用N₂物理吸附、X射线衍射（XRD）、H₂程序升温还原（H₂-TPR）、H₂程序升温脱附（H₂-TPD）、NH₃程序升温脱附（NH₃-TPD）和吡啶吸附红外（Py-IR）等手段对催化剂进行了表征.结果表明,不同载体催化剂的活性组分分散度及表面酸性质存在明显差异,显著影响了催化剂吸附、活化H₂与C=O键的能力,进而影响了催化剂的乙酰丙酸加氢活性.其中,Ni/SiO₂-Al₂O₃催化剂上的L酸中心能够促进C=O键的吸附、活化,与金属Ni上的H₂吸附活性位协同作用,大大提高了乙酰丙酸加氢活性.因此,具有最多L酸中心和丰富H₂吸附活性位的Ni/SiO₂-8Al₂O₃催化剂表现出最高的乙酰丙酸加氢活性,在180℃、4 MPa氢气压力下,乙酰丙酸转化率达到90.5%,目标产物γ-戊内酯选择性为100%.     

Ag-Pd/g-C3N4的制备及在水溶液中选择性氧化苯甲醇

采用硼氢化钠还原法在g-C₃N₄的表面负载Ag和Pd纳米颗粒制备Ag/g-C₃N₄、Pd/g-C₃N₄、Ag-Pd/g-C₃N₄光催化剂.采用能谱仪、X射线衍射、高分辨透射电子显微镜等技术对样品进行表征.结果显示,Ag-Pd/g-C₃N₄复合材料中C、N、Ag和Pd元素的质量百分数分别为22.718%、59.966%、9.132%和8.184%.Ag和Pd纳米颗粒负载在g-C₃N₄表面可提高材料在可见光区域的吸收以及提高苯甲醇的转化率,生成苯甲醛的选择性为85.6%.     

MoO3-C3N4复合光催化剂的可见光下高效催化降解甲基橙

以钼酸铵和C₃N₄为前驱体,利用浸渍法成功制备了高性能MoO₃-C₃N₄复合光催化剂,利用X射线衍射（XRD）、傅里叶红外（FT-IR）、高分辨电镜（HRTEM）及N₂吸附-脱附曲线等测试手段对所得MoO₃-C₃N₄光催化剂进行了结构和形貌表征。以可见光下光催化降解甲基橙反应表征MoO₃-C₃N₄的光催化活性。实验结果表明,MoO₃-C₃N₄光催化剂具有非常好的光催化降解性能,且MoO₃含量对反应活性产生显著影响。当MoO₃含量为1.6%（w/w）时光催化活性最好,其速率常数达到C₃N₄的50倍。通过研究发现该复合催化剂的高活性来自于其Z型光生载流子传输过程,抑制了光生电子空穴对的复合并延长了引入MoO₃产生的载流子的寿命。     

高度隔离过渡金属催化剂及其烯烃环氧化研究

 介绍了过渡金属杂原子分子筛的骨架杂原子表征、用离子注入法和化学嫁接法制备高度隔离过渡金属催化剂及其催化烯烃环氧化研究的结果．基于共振拉曼原理,用紫外共振拉曼光谱明确鉴别了TS－1,Fe－ZSM－5和V－MCM－41等分子筛中的骨架杂原子．用离子注入法和化学嫁接法制得具有高度隔离过渡金属离子的非杂原子分子筛催化剂．烯烃环氧化反应结果表明,所制得的催化剂显示出优良的催化性能．     

Co(II), Fe(III) or VO(II) Schiff base metal complexes immobilized on graphene oxide for styrene epoxidation

Cobalt(II), iron(III) or oxovanadium(II) Schiff base metal complexes have been covalently grafted onto graphene oxide ( GO ) previously functionalized with 3‐aminopropyltriethoxysilane. Potential catalytic behaviors were tested in the epoxidation of styrene, using air as the oxidant. The catalysts were characterized using infrared (IR) and Raman spectroscopies, thermogravimetric analyses, inductively coupled plasma atomic emission spectrometry (ICP‐AES), X‐ray diffraction, nitrogen adsorption–desorption, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). IR spectroscopy, thermogravimetric analyses and ICP‐AES confirmed the successful incorporation of the metal Schiff base complexes onto GO . X‐ray diffraction, nitrogen adsorption–desorption, Raman spectroscopy, SEM and TEM showed the intact structure of the GO . Co-GO and Fe-GO showed high styrene conversion (90.8 versus 86.7%) and epoxide selectivity (63.7 versus 51.4%). Nevertheless, VO-GO showed poorer catalytic performance compared with Co-GO and Fe-GO . The recycling results of these heterogeneous catalysts showed good recoverability without significant loss of activity and selectivity within four successive runs. Copyright © 2015 John Wiley & Sons, Ltd.     

介孔载体嫁接的Schiff碱铬配合物催化氧化苯甲醇合成苯甲醛

将Cr(salen)配合物分别嫁接于介孔SiO2,MCM-41和SBA-15上制备成非均相Schiff碱铬配合物,并用FT-IR,UV-Vis,XRD,N2吸附和元素分析等对非均相铬配合物进行了表征.以30%的H2O2为氧化剂,以非均相铬配合物为催化剂,在无有机溶剂、相转移催化剂和添加剂的条件下,研究了选择性催化氧化苯甲醇合成苯甲醛的反应.结果表明,非均相铬配合物都表现出较好的催化性能.选择不同的介孔载体对非均相铬配合物的催化性能有较大的影响,Cr(salen)/MCM-41配合物显示有最好的催化性能;在优化的反应条件下,苯甲醇转化率可达52.5%,苯甲醛选择性为100%,且该非均相铬配合物重复使用4次后仍保持较好的催化性能.     

Synthetic,characterization and catalytic studies of some coordination compounds derived from unsymmetrical quadridentate Schiff base ligand

The stable complexes of VO(IV), Cr(III), Mn(III), Fe(III), MoO₂(VI), and WO₂(VI), with an unsymmetrical tetradentate Schiff base ligand derived from 2-hydroxy-5-methylacetophenone, 2-hydroxy-5-chloroacetophenone and carbohydrazide were synthesized and characterized by the elemental analysis, UV-Vis and IR spectroscopy, magnetic measurements and thermal analysis. The VO(IV) and Mn(III) complexes were tested for the catalytic oxidation of styrene. The conversion of styrene increases with use of VO(IV) catalyst and decreases with use of Mn(III) catalyst.     

Synthesis of Nickel Lysine Salen Complex and Its Catalytic Performance for Styrene Epoxidation

Nickel lysine salen complex was successfully synthesized via a stepwise procedure and applied as a heterogeneous catalyst for styrene epoxidation. For comparison, several other transition metal (Mn, Fe, Co, and Cu) lysine salen complexes were also synthesized. The prepared catalysts were characterized by Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX). Data obtained by FT-IR and Raman spectroscopy indicated the formation of C=N bonds and the complexation of these bonds with metal ions. SEM analysis revealed that the complexation of metal ions with the C=N involves the change in surface morphology of samples. In addition, atomic percent composition of samples was obtained from EDX spectra, which was the complementary evidence for the formation of complexes. Results of catalytic measurements showed that a high conversion of styrene (91.51%) and selectivity to styrene oxide (91.99%) could be achieved over the nickel lysine salen complex with tert-butyl hydroperoxide as the oxidant. When the catalyst was reused the conversion of styrene decreased but the selectivity to styrene oxide still remained high.     

Dehydrogenation of ethylbenzene with nitrous oxide in the presence of mesoporous silica materials modified with transition metal oxides

The novel mesoporous templated silicas (MCM-48, SBA-15, MCF, and MSU) were used as supports for transition metal (Cu, Cr, or Fe) oxides. The catalysts were synthesized using the incipient wetness impregnation, and characterized by low-temperature N2 sorption, DRIFT, photoacoustic IR spectroscopy, UV-vis diffuse reflectance spectroscopy, and temperature-programmed desorption of ammonia. It was shown that the preparation method used results in different distributions and dimensions of the transition metal oxide clusters on the inert support surface. The prepared catalysts were tested in the reaction of oxidative dehydrogenation of ethylbenzene in the presence of nitrous oxide. The iron-containing catalysts showed the highest catalytic activity. The presence of isolated Fe3+ was found to be the most important factor influencing the ethylbenzene conversion. The undesirable effect of the increase in selectivity toward CO2 was observed for the samples with the highest concentrations of acidic surface sites.     

Transition metal complexes on mesoporous silica nanoparticles as highly efficient catalysts for epoxidation of styrene

We have synthesized a series of catalysts for epoxidation of styrene by immobilizing salicylaldimine transition metal (copper, manganese, and cobalt) complexes on mesoporous silica nanoparticles (MSNs) with diameters of 120-150 nm. The prepared catalysts are characterized by infrared (IR) spectra, thermal gravimetric analyses (TGA), inductively coupled plasma (ICP), CHN elemental analysis, nitrogen adsorption-desorption, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). These catalysts possess excellent catalytic efficiency in epoxidation of styrene when using tert-BuOOH (TBHP) as oxidant. Styrene shows a high conversion (～99%) as well as epoxide selectivity (～80%) over Cu-MSN catalysts, and high conversion (～99%) and moderate epoxide selectivity (～65%) over Mn-MSN and Co-MSN catalysts. The recycling experiment results indicate that these catalysts maintain catalytic activity even after being used for three cycles. Our results indicate that MSNs can serve as better catalyst supports.     

纳米SnO2高效催化烯烃与H2O2环氧化反应研究

构建了用于催化烯烃与过氧化氢环氧化反应的高效、 绿色催化反应体系. 首先, 通过水热合成法制备了纳米SnO₂, 并在320 ℃下煅烧. 随后, 对所有催化剂进行X射线衍射(XRD)、 紫外-可见漫反射光谱(UV-Vis)、 傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)和透射电子显微镜(TEM)表征. 进一步将催化剂用于以H₂O₂水溶液为氧化剂环氧化各种官能化烯烃(包括环烯烃, 苯乙烯和直链烯烃)的反应, 以高转化率和高选择性得到了环氧化物. 在相似的反应条件下, 发现合成的纳米SnO₂-170催化剂在催化1-甲基环己烯与H₂O₂的环氧化反应中的活性最佳, 在2 h内1-甲基环己烯的转化率达到100%, 环氧化物选择性达到100%.     

SiO2负载型铁系催化剂催化乙烯齐聚的研究

制备了硅胶负载型2,6-二亚胺基吡啶铁系齐聚催化剂。考察了不同负载温度,聚合中乙烯加压方式,催化剂的加入量以及丙烯对乙烯齐聚活性和α-烯烃分布的影响。结果表明,低温负载有利于催化剂活性提高,分段加压可以使催化剂的活性周期增加,聚合温度平稳,单位助催化剂MAO转化的乙烯量增加,而α-烯烃的选择性基本不变。Fe催化剂负载后,以单位助催化剂MAO计算的乙烯转化率提高。增加催化剂的量后,单位助催化剂MAO转化的乙烯量增加。在乙烯齐聚中加入少量丙烯催化剂的活性降低,α-烯烃分布向低碳方向移动。     

二氧化硅负载氧化锌催化剂的溶胶-凝胶和浸渍法制备及对仲丁醇分解反应的催化性能

分别采用溶胶-凝胶法和浸渍法制备了ZnO-SiO₂催化剂和ZnO/SiO₂催化剂并进行了表征, 以仲丁醇脱氢为探针反应, 研究了不同制备方法对催化剂表面ZnO物种存在状态及其催化性能的影响. 结果表明, 2种方法均可制备高分散的负载型ZnO催化剂. 在ZnO-SiO₂和ZnO/SiO₂催化剂上, 仲丁醇分别以脱水和脱氢反应为主. 经过分析, 催化剂上ZnO物种的存在状态是影响产物选择性的关键因素, 而2种催化剂表面的粒径、 比表面积和表面酸碱性不是影响该反应选择性的根本原因.