g-C3N4/CaTi2O5复合材料制备及其光催化性能

利用类石墨氮化碳（g-C₃N₄）和亚稳相钙钛氧化物（CaTi₂O₅）固相法制备C₃N₄/CaTi₂O₅复合材料。利用X射线衍射（XRD）、金相显微镜、扫描电子显微镜（SEM）及附带能谱分析仪（EDS）和N₂吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计（UV-Vis）测试了样品的光吸收性能,研究C₃N₄与CaTi₂O₅物质的量之比（n_C3N4/nCaTi₂O₅）对C₃N₄/CaTi₂O₅复合样品的物相结构和微观形貌的影响,同时考察C₃N₄/CaTi₂O₅复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明：相比纯C₃N₄和CaTi₂O₅样品,C₃N₄/CaTi₂O₅复合样品在可见光下具有较高的光催化性能,随着n_C3N4/nCaTi₂O₅增加,样品的光催化降解率随之增加而后降低,当n_C3N4/nCaTi₂O₅=1：1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

磁场诱导下Fe3S4向FeS2转化速率的增加

以FeCl₃和CH₄N₂S为主要原料，在0.2～0.4 T的外加磁场强度下，温度为170 ℃的反应体系中研究了磁场对前驱物Fe₃S₄转化成FeS₂过程的影响。结果表明，Fe₃S₄到FeS₂的转化率是与磁场强度有关的。Fe₃S₄的硫化过程可能是通过溶解-再结晶机理。外加磁场的存在可以促进物质的传输过程，从而加速前驱物的溶解和再结晶过程，导致和没有外加磁场相比Fe₃S₄到FeS₂的转化率的增加。     

簇合物(p-H2)N-HCCCN的结构和能量

采用两体作用势模型和遗传算法对簇合物（p-H₂）_N-HCCCN的极小能量结构和能量进行了理论研究.结果表明,20 个para-H₂分子形成HCCCN周围的第一个溶剂层,第一个溶剂层包含三个溶剂环,每个溶剂环都有6 个para-H₂分子,第19和20个para-H₂分子分别聚集在HCCCN分子的N、H原子末端. 进一步计算了（p-H₂）_N-HCCCN的化学势,发现化学势随para-H₂分子个数的增加呈震荡变化.     

电荷补偿对Ba2ZnGe2O7∶Bi3+荧光粉发光性质的影响

采用高温固相法制备了2个系列的荧光粉样品：Ba_2-xZnGe₂O₇∶xBi³⁺(系列Ⅰ)和Ba_1.994-yK_yZnGe₂O₇∶0.006Bi³⁺(系列Ⅱ)。X射线衍射(XRD)测试结果表明,少量Bi³⁺、K⁺的掺杂不会明显改变材料的物相结构。样品的荧光光谱测试结果表明,虽然2个系列样品的发光光谱都随组成成分变化有少量变化,但发光颜色基本上均为黄绿色。在358 nm的激发下,荧光粉的发射光谱呈现一个峰值在 500 nm 的宽发射带,归属于 ³P₁→^1S₀能级跃迁。在 500 nm 监测下,荧光粉的最强激发峰位于 358 nm,归属于¹S₀→³P₁能级跃迁,此外还有一个位于320 nm的肩峰归属于O^2--Bi³⁺电荷转移带。系列Ⅰ样品的光谱数据结果指出,Bi³⁺的最佳掺杂量x为0.006。在该基质中,Bi³⁺掺杂取代Ba²⁺属于不等价取代,会在晶格中产生Ba²⁺空位或间隙O^2-,对材料的发光强度产生负面影响。对此,采用K⁺与Bi³⁺协同掺杂起到电荷补偿的作用,填补Ba²⁺空位或捕获间隙O^2-缺陷。空位被填补或间隙被捕获均减少了晶格畸变,从而使发光强度明显提高。系列Ⅱ样品的光谱数据表明,完全电荷补偿的荧光粉样品相比于没有掺K⁺的样品,其发光强度提高了约2.5倍。     

两种3D微孔Zn-MOF对水溶液中Fe3+、Cr2O72-和丙酮分子的荧光传感

通过溶剂热法合成了2种三维微孔锌金属有机框架材料,其分子式为[Zn₃(DBA)(OH)(1,10-phen)₂]_n(1)和{[Zn₂(HDBA)(4,4''-bipy)_1.5]·H₂O}_n(2)(H₅DBA=3,5-二(2'',4''-对羧基苯基)苯甲酸;1,10-phen=1,10-菲咯啉;4,4''-bipy=4,4''-联吡啶)。结构分析表明,配合物1为三核锌基金属单元的三维微孔骨架,配合物2为双核锌基的微孔结构。与2相比,配合物1在水中具有较强的发光性能,可作为检测Fe³⁺、Cr₂O₇^2-和丙酮分子的发光传感器,具有较高的选择性和灵敏度。     

MOF-1和Tb@MOF-1荧光探针的设计、合成及对痕量Cr2O72-、S2O82-离子的识别

采用5-（（4-吡啶基）甲氧基）-异烟酸（H₂PLIA）、1,3,5-三（1-咪唑基）-苯（TIB）合成了金属有机骨架[Cd （PLIA）（TIB）]_n （MOF-1）。MOF-1是具有理想一维孔道的二维结构化合物,其一维孔道由柔性三角形PLIA^2-配体和刚性三角形TIB配体间隔形成。利用MOF-1易掺杂的优势,采用后修饰合成策略制备了Tb@MOF-1。对MOF-1和Tb@MOF-1进行了基本表征及荧光探针性能研究。2种探针材料具有相同的结构。MOF-1和Tb@MOF-1分别对水溶液中的Cr₂O₇^2-和S₂O₈^2-离子具有较强荧光识别能力,均有响应时间快,稳定性、选择性、灵敏度高的特点。研究了MOF-1和Tb@MOF-1对Cr₂O₇^2-和S₂O₈^2-的荧光识别机理,其不同可能与Tb³⁺离子掺杂有关。     

MoS2/g-C3N4复合材料的制备及可见光催化性能

首先在N-甲基吡咯烷酮溶液中超声剥离得到少层的MoS₂,将其与石墨相氮化碳（g-C₃N₄）复合,制得MoS₂/g-C₃N₄复合材料。采用X射线衍射（XRD）,扫描电镜（SEM）,X射线光电子能谱（XPS）,傅里叶变换红外光谱（FTIR）,Raman光谱,紫外-可见漫反射吸收光谱（DRS）和光致荧光（PL）技术对复合材料进行表征。可见光下考察MoS₂/g-C₃N₄复合材料光催化降解罗丹明B（RhB）的活性,结果表明：将少量MoS₂与g-C₃N₄复合可明显提高光催化活性,且1%（w/w）MoS₂/g-C₃N₄复合物的光催化活性最高,可能的原因是MoS₂和g-C₃N₄匹配的能带结构,增大了界面间电荷的传输,降低了光生电子-空穴的复合,进而提高了光催化活性。     

MOF-1和Tb@MOF-1荧光探针的设计、 合成及对痕量Cr2O72-、 S2O82-离子的识别

采用5-((4-吡啶基)甲氧基)-异烟酸(H₂PLIA)、1,3,5-三(1-咪唑基)-苯(TIB)合成了金属有机骨架[Cd(PLIA)(TIB)]_n (MOF-1),MOF-1是具有理想一维孔道的二维结构化合物,其一维孔道由柔性三角形PLIA^2-配体和刚性三角形TIB配体间隔形成。利用MOF-1 易掺杂的优势,采用后修饰合成策略制备了Tb@MOF-1。对MOF-1 和Tb@MOF-1 进行了基本表征及荧光探针性能研究。2种探针材料具有相同的结构。MOF-1和Tb@MOF-1分别对水溶液中的Cr₂O₇^2-和S₂O₈^2-离子具有较强荧光识别能力,均有响应时间快,稳定性、选择性、灵敏度高的特点。研究了MOF-1和Tb@MOF-1对Cr₂O₇^2-和S₂O₈^2-的荧光识别机理,其不同可能与Tb³⁺离子掺杂有关。     

金属-氨基多羧酸类配合物分子和晶体结构——Ⅰ. Na2［FeⅢ(ida)2］2·3H2O配合物的合成及结构测定

氨基多羧酸类配合物的配位数和结构不但与金属离子的半径、电荷和电子结构有关，而且还与氨基多羧酸类配体的形状和大小有关。本文报道了Na₂［Fe^Ⅲ(ida)₂］₂·3H₂O(ida=亚氨基二乙酸根)配合物的合成并测定了它的分子结构和晶体结构。具体结果如下：单斜晶系，P2₁/c空间群，a=15.6480(10)?,b=16.78     

重氮化合物与醇的插入反应合成α-烷氧基-β-二羰基化合物

研究了在过渡金属配合物催化下α-重氮-β-二羰基化合物与醇的插入反应, 考察了重氮化合物的结构、醇的结构、催化剂的性质、反应溶剂和反应温度对这一反应的影响. 发现当重氮化合物与甲醇的物质的量比为1∶10, 1 mmol% Rh₂(OAc)₄为催化剂和回流的苯的条件下, 反应能够以高的化学产率生成α-甲氧基-β-二羰基化合物. 手性醇衍生的重氮乙酰乙酸酯反应的产物中两种非对应异构体的比例为3∶2～1∶1.     

Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…     

Ion-beam irradiation of lanthanum compounds in the systems La2O3-Al2O3 and La2O3-TiO2

Thin crystals of La₂O₃, LaAlO₃, La_2/3TiO₃, La₂TiO₅, and La₂Ti₂O₇ have been irradiated in situ using 1 MeV Kr²⁺ ions at the Intermediate Voltage Electron Microscope-Tandem User Facility (IVEM-Tandem), Argonne National Laboratory (ANL). We observed that La₂O₃ remained crystalline to a fluence greater than 3.1×10¹⁶ ions cm⁻² at a temperature of 50 K. The four binary oxide compounds in the two systems were observed through the crystalline-amorphous transition as a function of ion fluence and temperature. Results from the ion irradiations give critical temperatures for amorphisation (T_c) of 647 K for LaAlO₃, 840 K for La₂Ti₂O₇, 865 K for La_2/3TiO₃, and 1027 K for La₂TiO₅. The T_c values observed in this study, together with previous data for Al₂O₃ and TiO₂, are discussed with reference to the melting points for the La₂O₃-Al₂O₃ and La₂O₃-TiO₂ systems and the different local environments within the four crystal structures. Results suggest that there is an observable inverse correlation between T_c and melting temperature (T_m) in the two systems. More complex relationships exist between T_c and crystal structure, with the stoichiometric perovskite LaAlO₃ being the most resistant to amorphisation.     

The reaction of MgCl2·4H2O with CCl2F2

A new reaction of MgCl₂·4H₂O with CCl₂F₂ is investigated by DTA and TG from room temperature to 350 °C. It is observed that MgF₂ was obtained between 252 and 350 °C, Below the temperature, MgCl₂·4H₂O dehydrates and hydrolyzes to MgCl₂ and Mg(OH)Cl, which are the real reactants of the reaction with CCl₂F₂. The formation of MgF₂ is ascribed to the reaction of MgCl₂ and Mg(OH)Cl with HF, which forms by decomposition of CCl₂F₂ with the taking part in of H₂O released from dehydration of hydrated magnesium chloride on the surface of MgCl₂ and Mg(OH)Cl, which catalyzes the decomposition of CCl₂F₂ in this case. Consequently, the reactions are tested in the fluid-bed condition. It is found that MgF₂ formed at temperatures down to 200 °C in a fluid-bed reactor. This reaction may be used as a method of disposing of the environmentally sensitive CCl₂F₂ (rather than release into the atmosphere). It is also a method for the preparation of MgF₂.     

Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

(Cl2AlNH2)n和(H2AlNH2)n(n=1～5)簇结构及其热力学性质

用HF自洽场理论和密度泛函理论(DFT)的B3LYP方法,在6 31G水平上研究了低聚物(Cl2AlNH2)n和(H2AlNH2)n(n=1～5)簇的几何构型、电子结构和聚合反应热力学性质,比较了两个系列化合物中化学键的强度.结果表明,Cl2AlNH2和H2AlNH2分子为C2 (EC)平面型结构,其中Al－N为由一个σ键和一个键组成的双键.(Cl2AlNH2)n和(H2AlNH2)n(n=1～5)分子为Dnh对称,Al－N是典型的σ单键 .低聚物(Cl2AlNH2)n和(H2AlNH2)n的稳定性顺序分别为: 3 > 2 > 4> 5 > 1和8 > 7 > 9 > 11 > 6.     

The crystal structure determinations and refinements of K2S2O7, KNaS2O7 and Na2S2O7 from X-ray powder and single crystal diffraction data

The crystal structures of K₂S₂O₇, KNaS₂O₇ and Na₂S₂O₇ have been solved and/or refined from X-ray synchrotron powder diffraction data and conventional single-crystal data. K₂S₂O₇: From powder diffraction data, monoclinic C2/c, Z=4, a=12.3653(2), b=7.3122(1), , β=93.0792(7)°, R_Bragg=0.096. KNaS₂O₇: From powder diffraction data; triclinic , Z=2, a=5.90476(9), b=7.2008(1), , α=101.7074(9), β=90.6960(7), γ=94.2403(9)°, R_Bragg=0.075. Na₂S₂O₇: From single-crystal data; triclinic , Z=2, a=6.7702(9), b=6.7975(10), , α=116.779(2), β=96.089(3), γ=84.000(3)°, R_F=0.033. The disulphate anions are essentially eclipsed. All three structures can be described as dichromate-like, where the alkali cations coordinate oxygens of the isolated disulphate groups in three-dimensional networks. The K-O and Na-O coordinations were determined from electron density topology and coordination geometry. The three structures have a cation-disulphate chain in common. In K₂S₂O₇ and Na₂S₂O₇ the neighbouring chains are antiparallel, while in KNaS₂O₇ the chains are parallel. The differences between the K₂S₂O₇ and Na₂S₂O₇ structures, with double-, respectively single-sided chain connections and straight, respectively, corrugated structural layers can be understood in terms of the differences in size and coordinating ability of the cations.     

EuZn2Si2 and EuZn2Ge2 Grown from Zn or Ga(ln)/Zn Flux

Single crystals of the novel ternary compounds EuZn₂Si₂ and EuZn₂Ge₂ were grown from pure gallium, indium, or zinc metal used as a flux solvent. Crystal properties were characterized using X-ray single-crystal analyses via Gandolfi and Weissenberg film techniques and by four-circle X-ray single-crystal diffractometry. The new compounds crystallize with ternary derivative structures of BaAl₄, i.e., EuZn₂Si₂ with ThCr₂Si₂-type (a=0.42607(2) nm, c=1.03956(5) nm, I4/mmm, R₁=0.038) and EuZn₂Ge₂ with CaBe₂Ge₂-type (a=0.43095(2) nm, c=1.07926(6) nm, P4/nmm, R₁=0.067). XAS and magnetic measurements on EuZn₂Si₂ and EuZn₂Ge₂ revealed in both compounds the presence of Eu²⁺ ions carrying large magnetic moments, which order magnetically at low temperatures. The magnetic phase transition occurs at T_N=16 and 7.5 K for the silicide and the germanide, respectively. In EuZn₂Si₂ there occurs a spin reorientation at 13 K and furthermore some canting of antiferromagnetically ordered moments below about 10 K. In EuZn₂Ge₂ a canted antiferromagnetic structure is formed just at T_N.     

Energetics of copper diphosphates – Cu2P2O7 and Cu3(P2O6OH)2

Differential scanning calorimetry and high temperature oxide melt solution calorimetry are used to study enthalpy of phase transition and enthalpies of formation of Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂. α-Cu₂P₂O₇ is reversibly transformed to β-Cu₂P₂O₇ at 338–363 K with an enthalpy of phase transition of 0.15 ± 0.03 kJ mol⁻¹. Enthalpies of formation from oxides of α-Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂ are −279.0 ± 1.4 kJ mol⁻¹ and −538.8 ± 2.7 kJ mol⁻¹, and their standard enthalpies of formation (enthalpy of formation from elements) are −2096.1 ± 4.3 kJ mol⁻¹ and −4302.7 ± 6.7 kJ mol⁻¹, respectively. The presence of hydrogen in diphosphate groups changes the geometry of Cu(II) and decreases acid–base interaction between oxide components in Cu₃(P₂O₆OH)₂, thus decreasing its thermodynamic stability.     

XRD and Si MAS-NMR spectroscopy across the β-Lu2Si2O7-β-Y2Si2O7 solid solution

Samples in the system Lu_2−xY_xSi₂O₇ (0?x?2) have been synthesized following the sol-gel method and calcined to 1300 °C, a temperature at which the β-polymorph is known to be the stable phase for the end-members Lu₂Si₂O₇ and Y₂Si₂O₇. The XRD patterns of all the compositions studied are compatible with the structure of the β-polymorph. Unit cell parameters are calculated as a function of composition from XRD patterns. They show a linear change with increasing Y content, which indicates a solid solubility of β-Y₂Si₂O₇ in β-Lu₂Si₂O₇ at 1300 °C. ²⁹Si MAS NMR spectra of the different members of the system agree with the XRD results, showing a linear decrease of the ²⁹Si chemical shift with increasing Y content. Finally, a correlation reported in the literature to predict ²⁹Si chemical shifts in silicates is applied here to obtain the theoretical variation in ²⁹Si chemical shift values in the system Lu₂Si₂O₇-Y₂Si₂O₇ and the results compare favorably with the values obtained experimentally.     

CeO2改性Ag-V2O5/TiO2催化剂的甲基吡啶氧化脱甲基性能

以锐钛矿TiO_2为载体,考察了CeO_2改性对Ag-CeO_2-V_2O_5/TiO_2催化3-甲基吡啶氧化脱甲基性能的影响,并优化了催化剂组成与制备条件.结果表明:Ce掺杂改性不仅能够与V物种作用形成Ce VO_4,而且促进V_2O_5分散,改善活性组分的氧化还原性能,从而提高3-甲基吡啶脱甲基转化率与选择性,改善Ag-V_2O_5/TiO_2催化性能.适宜的催化剂组成为V_2O_5负载量15%,Ce/V的摩尔比0.33,Ag质量分数1.0%.过高的焙烧温度将导致TiO_2载体向金红石型转变,Ag-CeO_2-V_2O_5/TiO_2适宜制备条件为450℃焙烧4 h.